Satel SOW-300 Series User manual

®
SOW-300
INDOOR LED BEACON
sow300_en 11/09
The SOW-300 indoor LED beacon is offered in two versions differing by the color of optical
signal (red in SOW-300 R, blue in SOW-300 BL).
1. FEATURES
•Optical signaling by means of super bright LEDs.
•3 selectable signaling modes.
•Tamper protection against opening the housing.
Fig. 1. View of the indoor LED beacon.
Explanations for Figure 1:
1 - housing base.
2 - screw for fixing the electronics board to the cover.
3 - electronics board.
4 - transparent element of the cover for light diffusion.
5 - cover.
6 - LEDs.

2 SOW-300 SATEL
2. DESCRIPTION OF ELECTRONICS BOARD
TMP TMP COM +12V
JP1
DOUBLE FLASH - LONG BREAK
FAST FLASHING
SLOW FLASHING
JP1 SETTINGS
Fig. 2. View of the electronics board.
Explanations for Figure 2:
1 - way of placing jumpers for suitable signaling mode:
- slow flashing (once a second),
- fast flashing (twice a second),
- two flashes, followed by a 1-second pause.
2 - JP1 pins for selecting the signaling mode.
3 - tamper contact reacting to housing opening.
4 - terminals:
TMP - tamper contact.
COM - common ground.
+12V - power supply input.
5 - fixing screw hole.
3. INSTALLATION AND CONNECTION
•The LED beacon may only be used indoor.
•The LED beacon should be installed on a flat surface by means of screws and expansion
bolts.
•All connections should only be made after the alarm system power supply has been
disconnected.

SATEL SOW-300 3
Fig. 3. Removing the cover.
TMP TMP COM
12V
SOW-300
INTEGRA 32
Fig. 4. Way of connecting the LED beacon to the alarm control panel, when signaling is to be
triggered by applying +12 V voltage (activating the OUT1 normal polarity high-current output).
The Z1 zone should be programmed as 24 h tamper.
INTEGRA 32
TMP TMP COM
12V
SOW-300
Fig. 5. Way of connecting the SOW-300 R LED beacon to the alarm control panel, when
signaling is to be triggered by applying the common ground (activating the OUT8 normal
polarity low-current output). The Z1 zone should be programmed as 24 h tamper.

4 SOW-300 SATEL
4. SPECIFICATIONS
Power supply voltage......................................................................................... 12 V DC ±15%
Maximum current consumption
SOW-300 R ................................................................................................44 mA
SOW-300 BL...............................................................................................85 mA
Environmental class........................................................................................... II (EN50130-5)
Operating temperature range..................................................................................-10...+55 °C
Dimensions .......................................................................................................... ø 97 x 37 mm
Weight.................................................................................................................................48 g
The latest EC declaration of conformity and product approval certificates are
available for downloading on website www.satel.eu
SATEL sp. z o.o.
ul. Schuberta 79
80-172 Gdańsk
POLAND
tel. + 48 58 320 94 00
[email protected]
www.satel.eu