Sauder Clifford Place 433364 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Share your journey!
Sauder.com
English pg 1-24
Français pg 25-28
Español pg 29-32
Lot # 576880 01/13/22
Purchased: __________________
Storage Cabinet with File
Cliord Place Collection | Model 433364
You'll love what we
have in storage.

Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Table of Contents Assembly Tools Required
No. 2 Phillips Screwdriver
Tip Shown Actual Size
3
4
5
6-24
25-28
29-32
33-34
35
Page 2 www.sauder.com/service 433364
Electric drill with 1/8" or 3/8" bit
(ONLY in indicated step)
Pencil

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
Page 3www.sauder.com/service433364
A RIGHT END (1)
B LEFT END (1)
E ADJUSTABLE SHELF (1)
F SHELF (1)
G BOTTOM (1)
H BOTTOM MOLDING (2)
I FOOT (4)
J DOOR (1)
K DRAWER FRONT (1)
L LEFT DRAWER SIDE (1)
M DRAWER BACK (1)
N RIGHT DRAWER SIDE (1)
O DRAWER BOTTOM (1)
R TOP (1)
S BACK (1)
A
B
R
S
E
F
G
H
H
I
I
I
I
J
K
L
MN
O

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
LARGE HIDDEN
CAM - 20
1ANGLED HEAD
CAM SCREW - 20
2
Angled head
(EXTENSION SET SHOWN SEPARATED)
EXTENSION RAIL - 2
PEXTENSION SLIDE - 2 Q
SMALL HIDDEN
CAM - 4
3STRAIGHT HEAD
CAM SCREW - 4
4
Straight head
LONG WOOD
DOWEL - 18
5SHORT WOOD
DOWEL - 4
6HOOK - 1
7
DOOR
STOP - 1
8ADJUSTABLE
GLIDE - 4
9HINGE
BRACKET - 3
10 HINGE - 3
11 PULL - 2
12 METAL
PIN - 4
13
BLACK 1/2" FLAT HEAD SCREW - 2
22
SILVER 1/2" FLAT HEAD SCREW - 10
21
1/2" PAN HEAD SCREW - 14
20
RUBBER
SLEEVE - 4
14 LARGE
APPLIQUE CARD - 1
16 APPLIQUE
CARD - 1
1715 FILE
GLIDE - 2
FURNITURE TIPPING
RESTRAINT KIT - 1
96
Page 4 www.sauder.com/service 433364
1-1/2" FLAT HEAD SCREW - 8
18 1-1/8" FLAT HEAD SCREW - 4 19

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws Cam Dowel
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2.
3.
1
2
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
Page 5www.sauder.com/service433364

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
Page 6 www.sauder.com/service 433364
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push twenty LARGE HIDDEN CAMS (1) into the ENDS (A
and B), BACK (S), SHELF (F), and BOTTOM (G).
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
Arrow
Hole
Arrow
Arrow
1
1
Arrow
1
A
B
S
F
G
(20 used)
1

Step 2
Page 7www.sauder.com/service433364
å Peel an applique from the LARGE APPLIQUE CARD (16)
and stick one onto each large hole in the BOTTOM (G).
å Flip the BOTTOM (G) over.
å Turn and tighten four FEET (I) into the threaded holes in
the BOTTOM (G).
å Turn four ADJUSTABLE GLIDES (9) into the threaded
holes in the FEET (I).
9
I
G
I
I
I
16
G
Surface without
HIDDEN CAMS
Remember:
Righty tighty.
Lefty loosey.

Step 3
Page 8 www.sauder.com/service 433364
å Insert four SHORT WOOD DOWELS (6) into the BOTTOM (G).
å Fasten the BOTTOM MOLDINGS (H) to the BOTTOM (G). Use
four 1-1/8" FLAT HEAD SCREWS (19).
å NOTE: Be sure the SHORT WOOD DOWELS insert into the
holes in the BOTTOM MOLDINGS.
6
6
G
H
H
1-1/8" FLAT HEAD SCREW
(4 used in this step)
19

Step 4
Page 9www.sauder.com/service433364
2(20 used)
Angled head
å Turn twenty ANGLED HEAD CAM SCREWS (2) into the
ENDS (A and B) and TOP (R).
å Open the FURNITURE TIPPING RESTRAINT KIT (96)
and fasten the SAFETY STRAP to the TOP (R). Use the
provided short screw.
A
B
R
1
96
Use the SHORT SCREW
from the RESTRAINT KIT.

Step 5
Page 10 www.sauder.com/service 433364
å Separate the EXTENSION SLIDES (Q) from the EXTENSION RAILS (P) as shown in the enlarged
diagram below. Be prepared, the parts are greasy.
å Fasten the EXTENSION RAILS (P) to the ENDS (A and B). Use six 1/2" PAN HEAD SCREWS (20).
å NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram.
Then, slide the inner cartridge of the EXTENSION RAIL in to find the other holes that lines up with
the holes in the ENDS. Turn a SCREW into those holes.
å NOTE: The EXTENSION SLIDES (Q) will be used later for the DRAWERS.
P
Pull down on the black release lever and pull the SLIDE from the RAIL.
P Q
Use these holes.
Open end
Open end
1/2" PAN HEAD SCREW
(6 used in this step)
20
A
B
P
P
7

Step 6
Page 11www.sauder.com/service433364
å Fasten the HINGE BRACKETS (10) to the RIGHT END (A)
exactly as shown. Use the SCREWS in the brackets.
å Fasten the HOOK (7) to the LEFT END (B). Use two
BLACK 1/2" FLAT HEAD SCREWS (22).
å Fasten the DOOR STOP (8) to the LEFT END (B). Use two
1/2" PAN HEAD SCREWS (20).
10
8
7
BLACK 1/2" FLAT HEAD SCREW
(2 used for the HOOK)
22
A
B
1/2" PAN HEAD SCREW
(2 used for DOOR STOP)
20

Step 7
Page 12 www.sauder.com/service 433364
å Insert two LONG WOOD DOWELS (5) into the edge and
surface of the BACK (S).
å Fasten the SHELF (F) and BOTTOM (G) to the BACK (S).
Use four 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: Be sure the LONG WOOD DOWELS in the BACK
insert into the holes in the SHELF and BOTTOM.
5
G
SF
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
Rounded edge
1-1/2" FLAT HEAD SCREW
(4 used in this step)
18
1
5

Step 8
Page 13www.sauder.com/service433364
å NOTE: You may need someone's help in this step.
å Insert six LONG WOOD DOWELS (5) into the RIGHT END (A).
å Fasten the SHELF (F), BOTTOM (G), and BACK (S) to the
RIGHT END (A). Tighten seven HIDDEN CAMS.
å NOTE: Be sure the LONG WOOD DOWELS in the RIGHT END
insert into the holes in the SHELF, BOTTOM, and BACK.
5
G
S
F
A
1
Don't worry. It isn't
Rome. This can be built
in a day.

Step 9
Page 14 www.sauder.com/service 433364
å NOTE: You may need someone's help in this step.
å Insert six LONG WOOD DOWELS (5) into the SHELF (F),
BOTTOM (G), and BACK (S).
å Fasten the LEFT END (B) to the SHELF (F), BOTTOM (G),
and BACK (S). Tighten seven HIDDEN CAMS.
å NOTE: Be sure the LONG WOOD DOWELS in the SHELF,
BOTTOM, and BACK insert into the LEFT END.
5
B
G
S
F
1

Step 10
Page 15www.sauder.com/service433364
å Carefully stand your unit upright.
å Insert four LONG WOOD DOWELS (5) into the ENDS (A and B).
å Fasten the TOP (R) to the ENDS (A and B) and BACK (S). Tighten six HIDDEN CAMS.
å NOTE: Be sure the LONG WOOD DOWELS in the ENDS insert into the holes in the TOP.
5
R
A
S
B
1
5

Step 11
Page 16 www.sauder.com/service 433364
å Turn four STRAIGHT HEAD CAM SCREWS (4) into the
DRAWER FRONT (K).
å Push four SMALL HIDDEN CAMS (3) into the large holes
in the DRAWER SIDES (L and N).
Straight head
4
3
Arrow
Arrow
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
K
L
N
1

Step 12
Page 17www.sauder.com/service433364
å Fasten the DRAWER BACK (M) to the DRAWER SIDES (L and N). Use four 1-1/2" FLAT HEAD SCREWS (18).
å NOTE: Be sure the DRAWER BOTTOM (O) inserts into the groove of the DRAWER BACK (M).
å Fasten the DRAWER SIDES (L and N) to the DRAWER
FRONT (K). Tighten four SMALL HIDDEN CAMS. å Slide the DRAWER BOTTOM (O) into the grooves in the DRAWER SIDES (L and N) and DRAWER FRONT (K).
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
L
L
L
N
N
N
M
2
O
O
KK
Unfinished surface
Groove
1
1
3
Start each screw a few turns before
completely tightening any of them.
1-1/2" FLAT HEAD SCREW
(4 used in this step)
18

Step 13
Page 18 www.sauder.com/service 433364
å Fasten the EXTENSION SLIDES (Q) to the DRAWER
SIDES (L and N). Use six 1/2" PAN HEAD SCREWS (20).
å Fasten a PULL (12) to the DRAWER FRONT (K). Use two
SILVER 1/2" FLAT HEAD SCREWS (21).
K
Q
Q
Open end
Use these holes.
Q
L
N
12
1/2" PAN HEAD SCREW
(6 used for the SLIDES)
20
Open end
Open end
SILVER 1/2" FLAT HEAD SCREW
(2 used for the PULL)
21

Step 14
Page 19www.sauder.com/service433364
å Push a FILE GLIDE (15) onto the top edge of the
DRAWER SIDES (L and N).
15
15
L
N
Side Step: Make
nachos. (Optional, but
recommended.)

Step 15
Page 20 www.sauder.com/service 433364
This screw will fit
into this slot. Then
tigthten the screw.
The screw on the back
side of the HINGE will
fit into this slot.
å Fasten the HINGES (11) to the DOOR (J). Use six SILVER 1/2" FLAT HEAD SCREWS (21).
å Fasten a PULL (12) to the DOOR (J). Use two SILVER 1/2" FLAT HEAD SCREWS (21).
å Fasten the HINGES on the DOOR (J) to the HINGE BRACKETS on the RIGHT END (A).
å Follow the large diagram below to fasten the HINGES to the HINGE BRACKETS keeping the DOOR vertical at all times.
å Tighten the mounting screws in the HINGE BRACKETS.
SILVER 1/2" FLAT HEAD SCREW
(8 used in this step)
21
J
11
12
Mounting screw
A
J