Sauder Worksense BERGEN CIRCLE 426297 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Sauder.com
Share your journey!
How can we help you? To reach our customer service, visit sauder.com/oceservice to chat with a
live rep or email us.
Prefer the phone? Give us a ring at
877-996-7539 .
Our award-winning team is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays).
Lot # 570461 07/27/21
Purchased: __________________
English pg 1-6
Français pg 7
Español pg 8
Table Desk 72" x 24"
Kiln Acacia finish | Model 426297
BERGEN CIRCLE COLLECTION

Table of Contents
Hardware Identification
Part Identification
Assembly Steps
Français
Español
Safety
Warranty
2
3
4-6
7
8
9-10
11
Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
426297 www.sauder.com/oceservicePage 2
L-WRENCH - 1
3
2-3/16" HEX HEAD SCREW - 10
11/2" HEX HEAD SCREW - 8 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A TOP (1)
B END (2)
C FRONT BRACE (1)
D REAR BRACE (1)
426297www.sauder.com/oceservice Page 3
A
B
C
D
B

Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Fasten the BRACES (C and D) to the ENDS (B). Tighten
eight 1/2" HEX HEAD SCREWS (2) using the L-WRENCH (3).
426297 www.sauder.com/oceservicePage 4
3
1/2" HEX HEAD SCREW
(8 used in this step)
2
The holes should
face each other.
B
C
D
B

å Fasten the ENDS (B) and BRACES (C and D) to the
TOP (A). Tighten ten 2-3/16" HEX HEAD SCREWS (1)
using the L-WRENCH (3).
å NOTE: You should start each SCREW a few turns
before completely tightening any of them.
Step 2
426297www.sauder.com/oceservice Page 5
2-3/16" HEX HEAD SCREW
(10 used in this step)
1
3
BRACE with more holes
A
B
C
D
B
The holes are
closer to this edge.