Sauder Edge Water Series User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-28
Français pg 29-32
Español pg 33-36
Lot # 365461 10/08/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Computer Desk
Edge Water Collection | Model 409043
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Sit and surf.

Table of Contents Assembly Tools Required
2-3
4-5
6-28
29-32
33-36
37-38
39
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
409043 www.sauder.com/servicesPage 2
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C HUTCH RIGHT END (1)
D HUTCH LEFT END (1)
E UPRIGHT (1)
F HUTCH UPRIGHT (1)
G TOP (1)
H MODESTY PANEL (1)
I LEG (3)
J HUTCH RIGHT SHELF (1)
K HUTCH LEFT SHELF (1)
L DIVIDER (2)
M BACK (1)
N HUTCH BACK (1)
O LARGE DRAWER FRONT (1)
P BRACE (2)
Q LAPTOP SHELF (1)
D241 LARGE DRAWER BOX FRONT (2)
S SMALL DRAWER FRONT (1)
D253 LARGE DRAWER SIDE (2)
D717 DRAWER BOTTOM (2)
D242 SMALL DRAWER BOX FRONT (2)
D270 SMALL DRAWER SIDE (2)
X HUTCH DRAWER FRONT (1)
Y HUTCH DRAWER SIDE (2)
Z HUTCH DRAWER BACK (1)
AA EXTENSION BLOCK (1)
BB SHELF MOLDING (2)
CC BOTTOM MOLDING (1)
DD TOP MOLDING (1)
EE HUTCH DRAWER BOTTOM (1)
FF FOOT (3)

Part Identification Now you know
our ABCs.
409043www.sauder.com/services Page 3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
S
X
Y
Z
AA
BB
CC
DD
EE
FF
I
FF
I
FF
P
LY
D241
D253
D717
D242
D270
BB D270
D242
D717
D253
D241

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
409043 www.sauder.com/servicesPage 4
40CA CABINET RIGHT - 1 40CB CABINET LEFT - 1 40CC DRAWER RIGHT - 1 40CD DRAWER LEFT - 1
BLACK LEFT
DRAWER SLIDE - 1
NN
BLACK RIGHT
DRAWER SLIDE - 1
MM
BLACK LEFT
CABINET RAIL - 1
LL
BLACK RIGHT
CABINET RAIL - 1
KK
PP EXTENSION SLIDE - 2 OO EXTENSION RAIL - 2
(EXTENSION SET SHOWN SEPARATED)
FILE GLIDE - 2
QQ RR TWIST-LOCK®FASTENER - 11
HIDDEN CAM - 17
1F CAM SCREW - 17 8F ANGLE BRACKET - 2 UU METAL PIN - 13 VV
METAL BRACKET- 2
WW KNOB - 3 XX YY TACK GLIDE - 4 DRAWER FRONT
BRACKET - 2
ZZ
LAPTOP PAD - 1
DDD
GROMMET - 1
CCC
CAM COVER - 3
BBB
CORD CLIP - 2
AAA

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
409043www.sauder.com/services Page 5
BLACK 1-7/8" FLAT HEAD SCREW - 10
EEE BLACK 1-5/8" PAN HEAD SCREW - 3 FFF
BROWN 1-1/2" FLAT HEAD SCREW - 4
GGG BLACK 1-1/4" FLAT HEAD SCREW - 20 HHH
BLACK 1-1/8" MACHINE SCREW - 2
III SILVER 1-1/8" FLAT HEAD SCREW - 2
JJJ
BROWN 1" FLAT HEAD SCREW - 4
LLL BLACK 7/8" LARGE HEAD SCREW - 6
MMM
SILVER 3/4" MACHINE SCREW - 1
NNN BLACK 9/16" LARGE HEAD SCREW - 6 OOO
BLACK 1/2" FLAT HEAD SCREW - 4
PPP GOLD 5/16" FLAT HEAD SCREW - 20 QQQ
NAIL - 20
RRR

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (RR) into the large holes in the RIGHT END (A)
and LEFT END (B).
å Repeat this step for the UPRIGHT (E) and
MODESTY PANEL (H).
409043 www.sauder.com/servicesPage 6
(11 used)
RR
Do not tighten the TWIST-LOCK® FASTENERS in this step.
B
A
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1770
to watch a video on how to assemble your unit.

å Push seventeen HIDDEN CAMS (1F) into the ENDS (A and B),
UPRIGHT (E), HUTCH BACK (N), and BRACES (P).
Step 2
409043www.sauder.com/services Page 7
Arrow
Arrow
1F
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
1F
Arrow
B
A
E
N
P
P
(17 used)

Step 3
å Separate the EXTENSION SLIDES (PP) from the EXTENSION
RAILS (OO) as shown in the upper diagram below. Be prepared, the
parts are greasy.
å Fasten the EXTENSION RAILS (OO) to the RIGHT END (A) and
UPRIGHT (E). Use four GOLD 5/16" FLAT HEAD SCREWS (QQQ).
å NOTE: For each EXTENSION RAIL, turn a SCREW into the hole
shown in the enlarged diagram. Then, slide the inner cartridge of the
EXTENSION RAIL out to find the other hole that lines up with the
hole in the ENDS and UPRIGHTS. Turn a SCREW into this hole.
å Fasten the CABINET RIGHT (40CA) and CABINET LEFT (40CB) to
the RIGHT END (A) and UPRIGHT (E). Use four GOLD 5/16" FLAT
HEAD SCREWS (QQQ) through holes #1 and #3.
409043 www.sauder.com/servicesPage 8
E
A
1
2
3
4
1
234
Roller end
Roller end
Hole
Push the black lever in and pull the SLIDE from the RAIL.
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
QQQ
PP OO
OO
OO
Open end
Open end

å Carefully turn the UPRIGHT (E) over onto the
TWIST-LOCK® surface.
å Fasten the EXTENSION BLOCK (AA) to the UPRIGHT (E).
Use two BLACK 1-1/4" FLAT HEAD SCREWS (HHH).
å Fasten the BLACK CABINET RAILS (KK and LL) to the
LEFT END (B) and EXTENSION BLOCK (AA). Use four
GOLD 5/16" FLAT HEAD SCREWS (QQQ).
å NOTE: The CABINET RAILS are marked "CABINET
RIGHT" and "CABINET LEFT" for easy identification.
Step 4
409043www.sauder.com/services Page 9
GOLD 5/16" FLAT HEAD SCREW
(4 used for the RAILS)
QQQ
E
B
LL
AA
KK
Roller end
Roller end
Surface with
TWIST-LOCK®
FASTENERS
Surface without
TWIST-LOCK®
FASTENERS
These edges should be even.
These edges should be even.
BLACK 1-1/4" FLAT HEAD SCREW
(2 used for the EXTENSION BLOCK)
HHH

Step 5
å Turn seventeen CAM SCREWS (8F) into the RIGHT END (A),
UPRIGHT (E), HUTCH ENDS (C and D), and LEGS (I).
409043 www.sauder.com/servicesPage 10
8F
A
C
D
E
I
I
I
This hole must be here.
These holes must be here.
(17 used)