Sauder Portage Park 426293 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
English pg 1-12
Français pg 13-14
Español pg 15-16
Lot # 560439 01/27/21
Purchased: __________________
2-Shelf Bookcase
Portage Park Collection | Model 426293
The stories of your life.

Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
2
3
4
5-12
13-14
15-16
17-18
19
Hardware Identification
Part Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
HIDDEN CAM - 4
1CAM SCREW - 4 2WOOD DOWEL - 4 3SHELF PIN - 4 4
BACK CONNECTOR - 6
5L-WRENCH - 1
6APPLIQUE CARD - 1
7
1-9/16" HEX HEAD SCREW - 4
81-3/8" PAN HEAD SCREW - 4
9
10 1/2" HEX HEAD SCREW - 4 9/16" FLAT HEAD SCREW - 6
11
Page 2 www.sauder.com/service 426293

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A TOP (1)
B BOTTOM (1)
C ADJUSTABLE SHELF (1)
D BACK (1)
E LEFT END (1)
F RIGHT END (1)
G FOOT (2)
H SKIRT (2)
A
B
C
D
E
F
G
H
G
H
Page 3www.sauder.com/service426293

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws Cam Dowel
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2.
3.
1
2
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
Page 4 www.sauder.com/service 426293

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
å Turn four CAM SCREWS (2) into the TOP (A).
å Push four HIDDEN CAMS (1) into the ENDS (E and F).
1
A
2
E
F
1
Arrow
Page 5www.sauder.com/service426293

Step
å Insert two WOOD DOWELS (3) into the TOP (A).
å Fasten the ENDS (E and F) to the TOP (A). Tighten four
HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the TOP insert
into the ENDS.
Step 2
A
E
F
3
3
Surface with
HIDDEN CAMS
1
Surface without
HIDDEN CAMS
Groove
Groove
Groove
Page 6 www.sauder.com/service 426293
Some assembly
(and snacks) required.

Step
å Slide the BACK (D) into the grooves in the ENDS (E and F)
and TOP (A).
Step 3
A
E
F
D
With the palm of your hand, tap the
BACK down into the groove.
Page 7www.sauder.com/service426293

Step
å Insert two WOOD DOWELS (3) into the BOTTOM (B).
å Fasten the BOTTOM (B) to the ENDS (E and F). Use four 1-3/8" PAN HEAD SCREWS (9).
å NOTE: Be sure the BACK (D) inserts into the groove of the BOTTOM (B).
å NOTE: Be sure the WOOD DOWELS in the BOTTOM insert into the ENDS.
Step 4
Be sure the BACK
inserts into the
BOTTOM groove.
3
3
E
F
D
B
1-3/8" PAN HEAD SCREW
(4 used in this step)
9
Page 8 www.sauder.com/service 426293

Step
å Fasten six BACK CONNECTORS (5) to the BACK (D), and
ENDS (E and F). Slide the lip of the BACK CONNNECTORS (5)
into the groove of the BACK, then tighten the SCREW.
Step 5
9/16" FLAT HEAD SCREW
(6 used in this step)
11
11
Slide the lip into
the groove, then
tighten the screw.
Lip
Lip
5
5
E
F
D
Page 9www.sauder.com/service426293
Now might be a
good time to refresh
your drink.

Step
å Fasten the FEET (G) to the SKIRTS (H). Tighten four 1/2"
HEX HEAD SCREWS (10) using the L-WRENCH (6).
å NOTE: You should start each SCREW a few turns before
completely tightening any of them.
Step 6
G
H
G
H
6
1/2" HEX HEAD SCREW
(4 used in this step)
10
Surface without holes
Surface with holes
Page 10 www.sauder.com/service 426293
These edges must be even.
These edges must be even.