Sauder Shoal Creek 408750 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 389112 03/15/16
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Hutch/Organizer
Shoal Creek Collection | Model 408750
For things 'n such.

Table of Contents Assembly Tools Required
3
4
5-18
19-21
22-24
25-26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
408750 www.sauder.com/servicesPage 2

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A RIGHT END (1)
B LEFT END (1)
C RIGHT UPRIGHT (1)
D LEFT UPRIGHT (1)
E TOP (1)
F SHELF (2)
G BACK (1)
H LARGE ADJUSTABLE SHELF (1)
I ADJUSTABLE SHELF (2)
J2 DRAWER FRONT (2)
B18 DRAWER BOTTOM (2)
D443 DRAWER BACK (2)
D444 DRAWER LEFT SIDE (2)
D445 DRAWER RIGHT SIDE (2)
D446 DRAWER BOX FRONT (2)
Now you know
our ABCs.
408750www.sauder.com/services Page 3
A
B
C
D
E
F
GH
I
J2
I
J2
F
B18
D445
D444
D443
D446
B18
D445
D444
D443
D446

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
408750 www.sauder.com/servicesPage 4
SLEFT DRAWER
SLIDE - 2
LEFT CABINET
RAIL - 2
Q
RIGHT CABINET
RAIL - 2
PRIGHT DRAWER
SLIDE - 2
R
HIDDEN CAM - 16
1F CAM DOWEL - 16 2F SAFETY BRACKET - 1 1G KNOB - 4
24K
CAM COVER - 8
12P METAL PIN - 12 1R RUBBER SLEEVE - 12 2R
BLACK 9/16" LARGE HEAD SCREW - 1
1S BLACK 1-7/8" FLAT HEAD SCREW - 5 2S
3S GOLD 5/16" FLAT HEAD SCREW - 16
NAIL - 52
1N
30S BLACK 1-9/16" FLAT HEAD SCREW - 8
SILVER 1-1/2" MACHINE SCREW - 4
95S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Push sixteen HIDDEN CAMS (1F) into the ENDS (A and B),
UPRIGHTS (C and D), and SHELVES (F). Then, insert the
metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
408750www.sauder.com/services Page 5
A
B
C
D
F
F
Arrow
1F
2F
(16 used)
Arrow
1F
2F
Do not tighten the HIDDEN CAMS in this step.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow

Step 2
å Fasten the CABINET RAILS (P and Q) to the ENDS (A and B)
and UPRIGHTS (C and D). Use eight GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
å NOTE: The CABINET RAILS are marked "CABINET RIGHT"
and "CABINET LEFT" for easy identification.
408750 www.sauder.com/servicesPage 6
A
B
C
DP
Q
P
Q
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
1
2
3
1
2
3
Roller end
Roller end
Angled edge
Angled edge
Angled edge
Angled edge
Roller end
Roller end
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
3S
1
2
3
1
2
3

å Fasten the UPRIGHTS (C and D) to the TOP (E). Tighten
four HIDDEN CAMS.
Step 3
408750www.sauder.com/services Page 7
C
DE
Surface with holes
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
This hole
must be here.
Angled edge
Angled edge
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Start Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
These edges
should be even.

Step 4
å Fasten the SHELVES (F) to the UPRIGHTS (C and D).
Tighten four HIDDEN CAMS.
408750 www.sauder.com/servicesPage 8
C
D
F
F
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Finished edge
Finished edge
Arrow
Minimum
190 degrees
Maximum
210 degrees

å Fasten the ENDS (A and B) to the TOP (E) and
SHELVES (F). Tighten eight HIDDEN CAMS.
Step 5
408750www.sauder.com/services Page 9
A
B
E
F
F
Angled edge
Angled edge
Surface without
HIDDEN CAMS
Surface
with
HIDDEN
CAMS
Arrow
Minimum
190 degrees
Maximum
210 degrees

Step 6
å Carefully turn your unit over onto its front edges. Unfold
the BACK (G) and lay it over your unit.
å Make equal margins along the top and both side edges
of the BACK (G). Push on opposite corners of your unit if
needed to make it "square".
å Fasten the BACK (G) to your unit using the NAILS (1N).
å NOTE: Be sure to tap NAILS into the holes that line up
over the UPRIGHTS (C and D).
408750 www.sauder.com/servicesPage 10
C
D
G
These holes must line up with the UPRIGHTS (C and D).
For support, place packing
foam and magazines here.
Do not tap NAILS along the
bottom edge of the BACK.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(38 used in this step)
1N