SECO-LARM ENFORCER SH-816S-SQ Series User manual

SH-816S-SQ/R shown
Self-Contained Siren
or Siren/Strobe
Installation Manual
Model
Product
Mount
SH-816S-BQ
Siren
Surface or back box (single-gang, double-gang, or C-type)
SH-816S-SQ/x*
Siren with Strobe
Surface or back box (single-gang, double-gang, or C-type)
*
Replace "x" with the first letter of the lens color, amber, blue, clear, or red.
The ENFORCER Siren/Strobe
is a multi-purpose device: siren, speaker, and (SH-816S-SQ only)
an LED strobe. It can serve as a regular siren, but also has an audio input that can be used to play
audio or broadcast messages. Audio input will override the siren for the duration of the broadcast.
The SH
-816S-SQ strobe light is available with amber, blue, clear, or red lenses.
•9~15 VDC and low current draw
•120dB Warble-tone siren
•25W Speaker for audio or broadcast system input (broadcast will interrupt the siren)
•Built-in tamper alarm output
•Weatherproof for outdoor/indoor use, IP65
•Mount directly to wall or to most common back boxes
In addition to the above, SH
-816S-SQ adds:
•Bright LED strobe light
•Strobe can be triggered separately from siren
•Strobe available in amber, blue, clear, or red

ENFORCER Self-Contained Siren or Siren/Strobe
2 SECO-LARM U.S.A., Inc.
Parts List
1x
Siren/Strobe
4x
Mounting screws
4x
Plastic wall anchors
1x
Back removal tool
1x
Manual
Specifications
Model
SH-816S-BQ
SH-816S-SQ/x*
Type
Siren
Siren with strobe
Operating voltage
9~15 VDC
Current
draw
Siren
680mA@12VDC
Strobe
N/A
190mA@12VDC
Both
N/A
870mA@12VDC
Siren volume
120dB
Speaker rating
25W Peak
Strobe flash rate
N/A
100 per minute
Tamper output
100mA@30 VAC/VDC
IP Rating
IP65
Operating humidity
0~95%
Operating temperature
-4°~131° F (-20°~55° C)
Housing
White polycarbonate plastic
Dimensions
6
1
/
8
"x4
15
/
16
"x4
1
/
2
" (155x126x115 mm)
6
1
/
8
"x7"x4
1
/
2
" (155x178x115 mm)
Weight
1-lb 13-oz (812g)
2-lb 2-oz (957g)
*Replace "x" with the first letter of the desired LED lens color – amber, blue, clear, or red.
Overview
Siren/Strobe
41/2" (115mm)
415/16"
(126mm)
Siren
7"
(178mm)
61/8" (155mm)
61/8" (155mm) 41/2" (115mm)

ENFORCER Self-Contained Siren or Siren/Strobe
SECO-LARM U.S.A., Inc. 3
Installation
1. Determine the desired location and
installation—surface or to a back box.
2. Remove the two screws from the two
tabs that attach the mounting base to
the main unit (See Fig. 1).
3. Squeeze the included base removal tool
and insert through the wiring access
hole in the back of the unit. Release and
pull carefully until the mounting base is
removed from the unit.
4. Remove the base removal tool and turn
the mounting base over to view the
wiring terminals (see Fig. 2)
5. Thread the wires (up to 8 wires,
depending on installation, see "Sample
Applications" on pg. 4) through the
center hole in the base and install the
base to the wall/back box using the four
mounting holes in the base, oriented so
that the engraved arrow is pointing up.
Be careful not to use the hole for the
tamper switch (see Fig. 2).
NOTE: For non-standard boxes, drill out
any other holes engraved in the
oval indentations on the
mounting base as needed.
6. Connect the wires for the desired
installation to the terminals on the
mounting base as shown in Fig. 3 and
referring to the sample applications on
pg. 4. Note that audio input requires
power to the P.A. (+) terminal.
7. Carefully slide the main unit onto the
base, ensuring the correct orientation
(note the notch and the arrows) and
ensuring the terminal plugs are correctly
engaged (see Fig. 1).
8. Attach the main unit to the base using
the two screws removed in step 2.
Fig. 1
Tamper switch
Orientation
alignment notch
Tamper
switch
hole
Mounting base removal tool
Terminal blocks are on reverse
Fig. 2
Mounting holes
Mounting holes Tamper
switch
hole
STROBE (+)
SIREN (+)
GND
P.A. (+)
AUDIO (+)
AUDIO (–)
TAMPER
TAMPER
Wiring
access
hole
Orientation
alignment
notch
Fig. 3
Terminal blocks
STROBE (+)
SIREN (+)
GND
P.A. (+)
AUDIO (+)
AUDIO (–)
TAMPER
TAMPER

ENFORCER Self-Contained Siren or Siren/Strobe
Sample Applications
*Strobe available on SH-816S-SQ only
NOTE: The audio broadcast will override and interrupt the siren for the duration of the broadcast.
STROBE (+)
SIREN (+)
GND
P.A. (+)
(+)
(–)
(+)
AUDIO (+)
AUDIO (–)
TAMPER
TAMPER
12VDC
Power
Supply (–)
Triggering both siren and strobe* together
(also showing audio input)
Alarm
System
Audio or
Broadcast
System
Strobe*
Triggering
Device
AUDIO (+)
AUDIO (–)
TAMPER
TAMPER
STROBE (+)
SIREN (+)
GND
P.A. (+)
(+)
(–)
(+)
(+)
(–)
12VDC
Power
Supply (–)
Siren and strobe* triggered by separate devices
(also showing audio input)
Alarm
System
Audio or
Broadcast
System
Siren
Triggering
Device
Strobe*
Triggering
Device
SECO-LARM
® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Website: www.seco-larm.com
Phone: [phone] | [phone] Email: [e-mail]
PICAN4
MI_SH-816S-xQ_210209.docx
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for one (1) year from the
date of sale
to the original customer. SECO
-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepa
id, to
SECO
-LARM. This Warranty is void if damage is caused by or attributed to acts o
f God, physical or electrical misuse or abuse, neglect, repair or alteration, improper
or abnormal usage, or faulty installation, or if for any other reason SECO
-
LARM determines that such equipment is not operating properly as a result of causes other
than
defects in material and workmanship. The sole obligation of SECO-
LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair
only, at SECO
-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incid
ental, or consequential personal or property damage of any kind
to the purchaser or anyone else.
NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without
notice. SECO
-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2021
SECO-LARM U.S.A., Inc. All rights reserved.
California Proposition 65 Warning
:These products may contain chemicals which are known to the State of California to cause cancer and birth defects or othe
r
reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
IMPORTANT:Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state,
and local laws and codes. SECO
-LARM will not be held responsible for the use of this product in violation of any current laws or codes.