SKYDANCE R10 User manual

● Apply to RGB+CCT, dual color or RGB LED controller.
● Ultra sensitive color adjustment touch slide.
● Each remote can match one or more receiver.
● CR2032 battery powered.
● Operate with LED indicator light.
● Magnet on the back which can be easily stuck on back holder or any metal surfaces.
User Manual Ver 1.0.2
Model No.: R10
Features
Page 1
Touch color slide/RGB+CCT/Wireless remote 30m distance/CR2032 batter y/Magnet stuck fix
Ultrathin Touch Slide RF Remote Controller Mechanical Structures and Installations
36 .0 0 mm
13 9. 00 mm
11. 00 m m
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key,
immediately press on/off key on the remote.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Technical Parameters
Operation temperature
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
R10 Ultrathin Touch Slide RF Remote Controller
LVDRED
53 .5 0 mm
Note: Before the first use,
please remove the protective
film on the battery.
C 2032 BatteryR
Back holder with magnet
To fix the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Input and Output
Warranty
5 years
Warranty
Output signal RF 2.4GHz( )
Working voltage 3VDC CR2032( )
Working current ＜5mA
Standby current ＜10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)

Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
User Manual Ver 1.0.2 Page 2
Key function
R 100%
G 100%
B 100%
Color touch slide
WW 50%
CW 50%
WW 100%
CW 0%
WW 0%
CW 100%
1. Short press for On/Off.
2. Press and hold 1-6s for brightness dimming.
3. When light is on, fast press 2 times for shift between RGB and CCT touch slide.
LED indicator
R10 Ultrathin Touch Slide RF Remote Controller