SKYDANCE T15 User manual

86mm
86mm
35mm 50mm
Dimension
● : AC85~265VInput voltage
● : DMX+RF(2.4G)Output type
● Light type: RGB/CCT/DIM
● Grey levels: 256/CH
● Dimming range: 0~100%
● Remote distance: 30m
● Working temperature: -30℃~55℃
● : L86×W86×H50mmProduct size
● Net weight: 130g
Summary
Technical Parameters
● Rotary panel RGB/CCT/DIM DMX controller,
can also used as RGB/CCT/DIM RF remoter.
● Select RGB/CCT/DIM light type, whether as a
remoter through 3bit DIP switch.
● Output international standard DMX512/1990 signal,
can connect more than one DMX decoder.
● Rotate knob to change color, color temperature,
brightness, support push, push twice, long push
operation.
● Adopt 2.4GHz wireless technology, when used as
controller, can accept up to 10 remoter control.
when used as remoter, can remote control multiple
RGB/CCT/DIM controller.
● RGB light type, built in 30 change mode optional.
Wall Mounted Rotary Panel
RGB/CCT/DIM (3 in 1) LED
DMX512 Master & RF 2.4G Remote
Model: T15
Wiring diagram
● Connect with DMX-PWM four channel decoder
Technical datasheet
Rotary Panel DMX Master & RF Remote
@ Guangzhou S kydance Co.,ltd All ri ghts reserved. We rese rve the right without no tice to amend t he technical informa tion and specificatio ns.
● Push: Turn on or off light.
● After turn on light, the knob default operation as follow:
RGB light type: Rotate knob to change color, 3 turns, 60 colors.
CCT light type: Rotate knob to change color temperature, 2.5 turns, 50 levels.
DIM light type: Rotate knob to change brightness, 2.5 turns, 50 levels.
● Push twice: Rotate knob to adjust brightness, 1 turn, 20 levels.
● Long push(1-5s): RGB light type, fine adjust saturation,
CCT/DIM light type, fine adjust brightness.
Knob fuction
@ Guangzhou S kydance Co.,ltd All ri ghts reserved. We rese rve the right w ithout no tice to amend t he technical informa tion and specificatio ns.
Page 2
V 1.1
www.iskydance.com
● RGB light type: each pixel 3 channel,
Order is red, green, blue, namely
pixel 1 is channel 1 ~ 3,
pixel 2 is channel 4 ~ 6 ,
pixel 3 is channel 7 ~ 9 , ...
● CCT light type:
odd channel(1,3,5,...) is WW,
even channel(2,4,6,...)is NW.
● DIM light type:
all channel synchronous dimming.
T15
DMX signal
DI+ DI - GND DO+ DO - GND
POWE R
V+ V-
CH1 V+ CH2 V+ CH3 V+ CH 4
V+
DI+ DI - GND DO+ DO - GND
POWE R
V+ V-
CH1 V+ C H2 V + CH3 V+ CH 4
V+
DMX signal
AC85-265V
Power input
Ppwer S upp ly
5-24V DC
AC110-230 V
RGB LED strip
L
N
RGB LED strip
DMX deco der DMX deco der
Dip switch setting
● Dip switch 1-2 bit: set RGB/CCT/DIM light type.
● Dip switch 3rd bit: set downside disable remoter,
set upside("ON") enable remoter.
Caution: before power on, you must confirm the selection of dip switch.
RF OUT OFF
ON
3
ON
1 2
DIM
ON
1 2
CCT
ON
1 2
RGB
● Match: Turn on light, turn off, immediately push for 5s, within 5s, press any key of the remoter.
● Delete: Turn on light, turn off, immediately push for 10s, delete all matched remoters.
Panel controller match remoter method
Panel remoter match receiver method
For controller with match key
● Match: Short press match key, within 5s, push the panel.
● Delete: Long press match key for 5s, delete all matched remoters.
For smart lamp
● Match: Switch off the power, then switch on power again,
short push the panel 3 times within 5s after power on,
the link is done once the light blinks 3 times.
● Delete: Switch off the power, then switch on power again,
short push the panel 5 times within 5s after power on,
the unlink is done once the light blinks 5 times.
TM
TM
1 2
ON
3

Installation diagram
2. After connect wires, put bottom case into 86 bottom box, put in the screw
and tighten.
1. Remove the knob, then flip panel, inserted into the card edge aperture with
a small screwdriver, gently pry and open the panel.
bottom case upper case
NOTES:
● In order to ensure safety, turn off the power first before wiring, ensure correct
wiring to avoid short circuit.
● In the process of installation, don't push the knob hardly, so as not to loose
knob spindle and scratch panel.
3. From top to bottom, moderately cover upper case,then mount knob,
complete installation.
@ Guangzhou S kydance Co.,ltd All ri ghts reserved. We rese rve the right without no tice to amend t he technical informa tion and specificatio ns.
Page 3
V 1.1
www.iskydance.com
Technical datasheet
No. Name
1
2
3
4
5
6
7
8
9
10
Static red
Static green
Static blue
Static yellow
Static cyan
Static purple
Static white
7 color jump sectionally
7 color strobe sectionally
6 color smooth sectionally
No. Name No. Name
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
RGB scanning
7 color scanning
RGB multi-scanning
7 color multi-scanning
RGB flow
7 color flow
RGB multi-flow
7 color multi-flow
Blue White chase
RGBW+Black chase
7 color chase
Blue meteor
White meteor
7 color meteor
Red Yellow float
Green Cyan float
Blue Purple float
RGBW+Black float
RGB+W float
6 color float
RGB change mode list
Malfunctions analysis & troubleshooting
Malfunctions
Causes Troubleshooting
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the
remoter.
1. Replace batter y.
2. Reduce remote distance.
3. Re-match the remoter.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
1. DMX decoder first address error.
2. Wrong connection of RGB wires.
1. Check the DMX first address.
2. Reconnect RGB wires.
Wrong color
No response
from the remoter
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good
ventilation.
4. Please check if the output voltage of any power supplies used complywith the working
voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to
avoid any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product
by yourself.
Safety & Warnings
Warranty Agreement
1. 3-year warranty:
● The warranty is for free repair or replacement and covers manufacturing faults only.
● Do not include fees of on site maintenance and consumable parts.
2. Limited Warranty
● Artificial damage caused by improper use, such as use inappropriate power supply,
improper accessories, improper installation, did not follow the instructions, error using
or negligence.
● Any damages caused by force majeure, such as natural disaster, abnormal voltage.
● The normal use of products caused by aging, wear and tear, but it does not affect the
normal use.
@ Guangzhou S kydance Co.,ltd All ri ghts reserved. We rese rve the right without no tice to amend t he technical informa tion and specificatio ns.
www.iskydance.com
Technical datasheet
Page 4
V 1.1
Rotary Panel DMX Master & RF Remote
T15
Rotary Panel DMX Master & RF Remote
T15 TM
TM