SKYDANCE XC User manual

LVD
Model No.: XC
Max 510 channel/Wireless remote control
Features
RF-DMX512 RGB LED Controller
RED
● Mini-style RF 2.4G multi-pixel RGB LED controller with DMX512 signal output.
● Send international standard DMX512/1990 signal to DMX512 decoders or RGB LED lamps with DMX decode chip.
● Match with Skydance’s 2.4G RGB/RGBW remote control, such as R9.
● 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.
Control dots Max 170 RGB pixels
(510 Channels)
Dynamic mode 32
Input signal RF 2.4GHz
Output signal DMX512
Input voltage 5-24VDC
Power consumption 1W
Technical Parameters
Input and Output
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
Safety and EMC
EMC standard (EMC)
Certification CE,EMC,LVD
EN 61347-1:2015
EN 61347-2-11:2015
Safety standard(LVD)
EN55032:2015,
EN61000-3-2:2014,
EN61000-3-2:2013,
EN55024 :2010/A1:2015
User Manual Ver 1.0.2 Page 1
www.iskydance.com

Mechanical Structures and Installations
Wiring Diagram
18 mm
97mm
33 mm
Power input -
Power input +
LED indicator
Match key
Installation rack
Installation rack
GND
GND
DMX+ signal output
DMX- signal output
Power Supply
5-24VDC
Constant Voltage
AC100-240V
Power Supply
5-24VDC
Constant Voltage
AC100-240V
● XC connect with DMX spot light
A
G
B
DMX spot light
DMX signal
A
G
B
DMX digital light strip
DMX signal
● XC connect with DMX pixel strip
D+ D- GND GND
INPUT 5-24VDC
+
DMX OUTPUT
D+ D- GND GND
INPUT
5-24VDC
+
DMX OUTPUT
XC RF-DMX512 RGB LED Controller
User Manual Ver 1.0.2 Page 2
www.iskydance.com

DMX digital light tube
DMX signal
DMX digital light tube
A
G
B
● XC connect with DMX Digital light tube
D+ D- GND GND
INPUT
5-24VDC
+
DMX OUTPUT
Note:
1. DMX decoder first address set in sequence as 1,4,7,10,...
2. For D3 decoder, CH1/CH2/CH3 channel corresponding to R/G/B channel output.
Power Supply
5-24VDC
Constant Voltage
AC100-240V
● XC connect with DMX-PWM four channel decoder
DMX signal
DMX signal
D+ D- GND G ND
INPU T
5-24VD C
+
DMX OU TPUT
D3 D3 D3
1 2 31 2 31 2 3
RGB LED strip RGB LED strip RGB LED strip
Power Supply
12-24VDC
Constant Voltage
AC100-240V
Power Supply
5-24VDC
Constant Voltage
AC100-240V
XC RF-DMX512 RGB LED Controller
User Manual Ver 1.0.2 Page 3
www.iskydance.com

Match Remote Control
Match:
Short press match key, immediately press on/off key of the remote.
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
Dynamic mode list
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
Red horse race white ground
7 color jump sectionally
7 color strobe sectionally
6 color smooth sectionally
7 color chase
Red Yellow float
Green Cyan float
Blue Purple float
RGBW float
No. Name No. Name No. Name
Blue White float
Purple float
Red float
Green float
Blue float
Blue meteor
White meteor
7 color meteor
Purple meteor
RGB chase
Blue White chase
Green Cyan chase
Green horse race white ground
Blue horse race white ground
Yellow horse race blue ground
Cyan horse race blue ground
Purple horse race blue ground
7 color multi horse race
7 color scan close + open
7 color multi-scan close + open
7 color horse race close + open
7 color multi horse race close + open
6 color float
Malfunctions analysis & troubleshooting
1. DMX decoder start address error.
2. Wrong connection of R/G/B wires.
1. Check the DMX start address.
2. Reconnect R/G/B wires.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
Causes Troubleshooting
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
Malfunctions
Wrong color
No light
No response
from the remote
XC RF-DMX512 RGB LED Controller
User Manual Ver 1.0.2 Page 4
www.iskydance.com