SKYDANCE V4-WPS User manual

Features
Technical Parameters
Mechanical Structures and Installations
1
User Manual Ver 1.0.0
Wiring Diagram
Model No.: V4-WPS
4 Channel Constant Voltage LED Waterproof RF Controller
IP67 waterproof/4 Channels/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize
● Waterproof 4 channel constant voltage LED RF controller with IP67 rating,
suitable for outdoor and damp environment.
● Match with RF 2.4G single zone or multiple zone single color, dual color and
RGB/RGBW remote control.
● One RF controller accept up to 10 remote control.
● 4096 levels 0-100% dimming smoothly without any flash.
● , built in 10 dynamic mode, include jump or gradual change style.When using with RGB/RGBW light
● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
● Synchronize on multiple number of controllers.
● Fade in and out effect selectable. LVD RED
Output power 4x(60-180W)
Output voltage 4 x (12-36)VDC
Output current 4CH,5A/CH
Input and Output
Input voltage 12-36VDC
Input current 20.5A
Output type Constant voltage
Gross weight
Size
Package
Dimming data
Dimming range
RF 2.4GHz
30m(Barrier-free space)
4096 (2^12) levels
0 -100%
Input signal
Control distance
Dimming gray scale
Operation temperature
Case temperature (Max.)
Environment
IP67
IP rating
Ta: -30
O
C ~ +55
O
C
T c:
+85
O
C
PWM frequency
Dimming curve
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Warranty
5 years
Warranty
1000Hz (default)
Logarithmic
0.492kg
L165 x W98 x H72mm
RGBW LED strip
W
● V4-WPS for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become RGB type, .the light blinks 5 times
RGB /RGBW remote
● V4-WPS for dual color
+
CW
WW Dual color LED strip
+
CW
WW Dual color LED strip
CCT remote
153.00 mm
57.00 mm
143.50 mm
34.00 mm
V4-WPS
LED Output
V+
Black
Brown
Y/G
Blue
Gray
1R
G
B
W
2
3
4
WW
CW
WW
CW
Power Input
Brown ：V+
Blue ：V-
Uin=12-36VDC
Iin=20.5A
Uout=4x(12-36)VDC
Iout=4x5A
Pout=4x(60-180)W
Temp Range: -30℃~+55℃
•tc=75℃
RGBW/RGB/CCT/Dimming
4CH LED RF Controller
IP67
LED Output
V+
Black
Brown
Y/G
Blue
Gray
1R
G
B
W
2
3
4
WW
CW
WW
CW
Power Input
Brown ：V+
Blue ：V-
AC100-240V
Power Supply
12-36VDC
Constant Voltage
LED Output
V+
Black
Brown
Y/G
Blue
Gray
1R
G
B
W
2
3
4
WW
CW
WW
CW
Power Input
Brown ：V+
Blue ：V-
AC100-240V
Power Supply
12-36VDC
Constant Voltage

Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key
(multiple zone remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 3 times means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
RGB/RGBW dynamic mode list
No. Name No. Name
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
1
2
3
4
5
6
7
8
9
10
Dual color control
CH1,CH3=Warm white LED CH2,CH4=Cool white LED
Each channel can supply up to 120W(@24V) and white balance can be controlled as such:
Color temperature
Power distribution
Cool white Neutral white
CH1=0W,CH2=120W CH1=60W,CH2=60W
Dimming curve for RGBW/RGB/DIM
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60
Brightness(%)
10 20 30 40
Gamma=1.6
Dimming curve for CCT
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 9 0 100
Brightness(%)
10 20 30 40
Gamma=1.0
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
Cool white(Max. 6500K)
Warm white(Min. 2700K)
Neutral white(4000K)
Recommended CCT range
Linear dual color tuning
70 80 90 100
CH3=0W,CH4=120W CH3=60W,CH4=60W
Malfunctions analysis & troubleshooting
Wrong color 1. Wrong connection of R/G/B/W wires. 1. Reconnect R/G/B/W wires.
Malfunctions
Causes Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. Check the power.
2. Check the connection.
No light
Long press match key 5s, then short press match key 3 times,
the lighting effect will be set to the fade in and fade out in 3s.
Long press match key 10s, restore factory default parameter,
the light blinks 10 times, the light on/off time restores to 0.5s.
Fade in and Fade out Setting
Warm white
CH1=120W,CH2=0W
CH3=120W,CH4=0W
2
User Manual Ver 1.0.0
1. No power.
2. Wrong connection or insecure.
● V4-WPS for single color
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
+Single color LED strip
Dimming remote
LED Output
V+
Black
Brown
Y/G
Blue
Gray
1R
G
B
W
2
3
4
WW
CW
WW
CW
Power Input
Brown ：V+
Blue ：V-
AC100-240V
Power Supply
12-36VDC
Constant Voltage