SKYDANCE RGBW User manual

● Scene
1. Short press: Select 8 scenes.
2. Long press(10s): When multiple controllers share a scene key, achieve simultaneous select.
● On/Off
1. Short press: Turn on/off light.
2. Long press(1-5s): When light is on, increase or decrease brightness continuously.
3. Long press(10s): When multiple controllers share a on/off key, achieve simultaneous adjustment.
V4 receiver match with all kinds of single or multiple zone 2.4G RF remote controller.
After match different color RF remote, the receiver become the same color controller.
1. Match: Switch off the power, then switch on power again,
short press on/off key or zone key 3 times on the remote quickly within 5s after power on,
the link is done once the light blinks 3 times.
2. Delete: Switch off the power, then switch on power again,
short press on/off key or zone key 5 times on the remote quickly within 5s after power on,
the unlink is done once the light blinks 5 times.
3. Multiple zone remote only use zone key to match each zone receiver.
External push switch
Power input
LED output
1. Match: Short press match key, within 5s, press on/off key or zone key of the remote.
2. Delete: Long press match key for 5s, delete all matched remote.
3. Multiple zone remote only use zone key to match each zone receiver.
27mm
● 4 channel RF 2.4G controller, default as RGB/RGBW type, need match RGB/RGBW remote,
create colorful static or dynamic effect.
● Can also be used as dual color temperature or dimming controller, good compatibility.
● Full compatibility with a variety of single color, dual color and RGB/RGBW remote.
● Smooth dimming and switch without any flickering.
● When control RGB/RGBW lamp, built in 10 mode, include jump or gradual change style.
● Adopt 2.4GHz wireless technology, remote distance up to 30m, can accept up to 10 remote control.
● Auto-transmitting function, one receiver can transmit the signal from the remote to another receiver
within 15m, so the remote control distance can be beyond 100m.
● Auto-synchronization function, different receivers can work synchronously when they are controlled by
the same remote, under same dynamic mode and same speed.
● Can be WiFi controlled by APP installed on IOS or Android mobile devices while working with WiFi-Relay
controller. User can customize own RGB change mode list by APP for advanced function.
● Can connect with external push switch to achieve on/off and scene change function.
● 4CH CV RF controller can connect unlimited number of 4CH CV or CC power repeaters in series
or in parallel to expand output power, achieve synchronous control effect.
Match guide
Interface specification
External push switch
Match key
Use Match key
Use Power-up
175mm
160mm
45mm
Dimension
Technical parameter
Summary
RGBW/RGB/CCT/Dimming
4 Channel LED RF Controller
User Guide
● : Input voltage 12-36VDC
● : PWM constant voltageOutput type
● : 4CH, 5A/CHOutput current
● : 4 x (60-180)WOutput power
● Remote distance: 30m
● Working temperature: -30℃~55℃
● : L175×W45×H27mmProduct size
● Net weight: 110g

Malfunctions analysis & troubleshooting
RGB change mode list
1. The product shall be installed and serviced by a qualified person.
2. The product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage
of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety information
Wrong color 1. Wrong connection of R/G/B/W wires. 1. Reconnect R/G/B/W wires.
Malfunctions
Causes Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
● 12V lamp, Input 12V power supply, each channel can load 0~60W,
● 24V lamp, Input 24V power supply, each channel can load 0~120W,
● 36V lamp, Input 36V power supply, each channel can load 0~180W,
The power supply power must larger than load power 20%.
Power supply select guide
No. Name No. Name
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
1
2
3
4
5
6
7
8
9
10
V4
V+
+
+
+
V+
WW
NW
WW
NW
+
Single color LED strip x 4
V4
+
R
G
B
W
V4
● V4 for single color
AC110-230V
● V4 for dual color
AC110-230V
● V4 for RGB/RGBW
AC110-230V
Push switch
(optional)
Push switch
(optional)
Push switch
(optional)
Dual color WW/NW LED strip
Power Supply
12-36VDC
Constant Voltage
Power Supply
12-36VDC
Constant Voltage
Power Supply
12-36VDC
Constant Voltage
RGBW LED strip
Wiring diagram