SKYDANCE VP User manual

Technical Parameters
Model No.: VP
4 Channels/DC power socket input/Step-less dimming/Wireless remote control/Auto-transmitting/Synchronize
Features
RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller
●DC power socket input and 4 channel constant voltage output.
● Match with Skydance’s 2.4G single color, dual color and RGB/RGBW remote control.
● One RF controller accept up to 10 remote control.
● , built in 10 dynamic mode, include jump or gradual change style.When using with RGB/RGBW light
● Auto-transmitting function: Controller automaticly transmit signal to another controller with 30m control distance.
● Synchronize on multiple number of controllers.
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
RF 2.4GHz
30m
4096 levels
0 -100%
Input and Output
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Input signal
Control distance
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Output type Constant voltage
Output power 4 x (48-96)W
Output voltage 4 x (12-24)VDC
Output current 4CH,4A/CH,Max 6A
Input voltage 12-24VDC
Input current 15.5A
LVD RED
750Hz
PWM Frequency
Dimming curve Logarithmic
User Manual Ver 1.0.2 www.iskydance.com Page 1

Mechanical Structures and Installations
VP RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller
+
-
+
IN PU T
12-24 VD C
Output LED +
Output Red LED -
Output Green LED -
Output Blue LED -
Output White LED -
Power input +
Power input -
LED indicator
Match key
Installation rack
DC socket input
Installation rack
114.00 mm
38.00 mm
20.00 mm
OU TP UT
+ + +
W
W4 +
+ +
Output LED +
VP for dual color ●
● VP for RGB/RGBW
W
W4
+
-
OUT PUT
+
INP UT
12-24V DC
+ + +
+ + +
VP
W
W4
+
-
OUT PUT
+
INP UT
12-2 4VD C
+ + +
+ + +
VP
+
CW
WW Dual color LED strip
+
CW
WW Dual color LED strip
RGBW LED strip
W
Power Supply
12-24VDC
Constant Voltage
AC100-240V
RGB remote
Power Supply
12-24VDC
Constant Voltage
AC100-240V
● VP for single color
W
W4
+
-
OUT PUT
+
INP UT
12-2 4VD C
+ + +
+ + +
VP
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
+Single color LED strip
Power Supply
12-24VDC
Constant Voltage
AC100-240V
Dimming remote
CCT remote
Wiring Diagram
User Manual Ver 1.0.2 www.iskydance.com Page 2

Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Application notes
1. All the receivers in the same zone.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Zone 1 Zone 2 Zone 3
RF remote
30m 30m
Zone 4
RF remote
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be limitless.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled
by the same remote, under same dynamic mode and with same speed.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
30m
30m30m
VP RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller
User Manual Ver 1.0.2 www.iskydance.com Page 3

Malfunctions analysis & troubleshooting
RGB/RGBW dynamic mode list
Wrong color 1. Wrong connection of R/G/B/W wires. 1. Reconnect R/G/B/W wires.
Malfunctions
Causes Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
No. Name No. Name
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
1
2
3
4
5
6
7
8
9
10
Dual color control
CH1,CH3=Warm white LED
CH2,CH4=Cool white LED
Each channel can supply up to 96W(@24V) and white balance can be controlled as such:
Color temperature
Power distribution
Cool white Warm whiteNeutral white
CH1=0W,CH2=96W CH1=48W,CH2=48W CH1=96W,CH2=0W
Dimming curve for RGBW/RGB/DIM
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60
Brightness(%)
10 20 30 40
Gamma=1.6
Dimming curve for CCT
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.0
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
Cool white(Max. 6500K)
Warm white(Min. 2700K)
Neutral white(4000K)
Recommended CCT range
Linear dual color tuning
70 80 90 100
CH3=0W,CH4=96W CH3=48W,CH4=48W CH3=96W,CH4=0W
VP RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller
User Manual Ver 1.0.2 www.iskydance.com Page 4