Sony ICP-X7000 User manual

INTEGRATED CONTROL PANEL
ICP-X7000
MKS-X7011
MKS-X7017
MKS-X7018
MKS-X7019
MKS-X7020
MKS-X7021
MKS-X7023
MKS-X7024
MKS-X7026
MKS-X7031TB
MKS-X7032
MKS-X7033
MKS-X7035
MKS-X7075
MKS-X2700
MKS-X7700
MKS-X7701
MKS-X7702
MKS-X7040
MKS-X7041
MKS-X7042
PWS-100SC1
PWS-110SC1
BZPS-7020
BZPS-7021
BZPS-7030
BZPS-7031
BZPS-7700
INSTALLATION MANUAL
1st Edition (Revised 7)

ICP-X7000
警告
このマニュアルは，サービス専用です。
お客様が，このマニュアルに記載された設置や保守，点検，修理などを行うと感電や火災，
人身事故につながることがあります。
危険をさけるため，サービストレーニングを受けた技術者のみご使用ください。
WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
利用条件:
① 本情報はソニー製品の販売，設置，設定，使用の目的でのみご利用ください。かかる
目的以外での利用を禁止します。
② 著作者の事前の書面による許可なく，本情報の全部または一部の複写，複製，転載，
改変，翻訳，送信等を禁止します。
情報改訂:
本情報は，当社の裁量により，予告なく変更されることがあります。ご使用される場合，
本情報が最新の情報であることを確認のうえ，ご使用ください。
Conditions of Use:
(1) Please use this information only for the purpose of sales, installation, configuration,
and use of Sony products. Using this information for any purpose other than the purpose
described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this
information in whole or in part without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please
confirm that this information is up-to-date before using it.

ICP-X7000 1 (P)
ICP-X7000 (SY)
ICP-X7000 (CN)
MKS-X7011 (SY) Serial No. 10001 and Higher
MKS-X7017 (SY) Serial No. 10001 and Higher
MKS-X7018 (SY) Serial No. 10001 and Higher
MKS-X7019 (SY) Serial No. 10001 and Higher
MKS-X7020 (SY) Serial No. 10001 and Higher
MKS-X7021 (SY) Serial No. 10001 and Higher
MKS-X7023 (SY) Serial No. 10001 and Higher
MKS-X7024 (SY) Serial No. 10001 and Higher
MKS-X7026 (SY) Serial No. 10001 and Higher
MKS-X7031TB (SY) Serial No. 10001 and Higher
MKS-X7032 (SY) Serial No. 10001 and Higher
MKS-X7033 (SY) Serial No. 10001 and Higher
MKS-X7035 (SY) Serial No. 10001 and Higher
MKS-X7075 (SY) Serial No. 10001 and Higher
MKS-X2700 (SY) Serial No. 10001 and Higher
MKS-X2700 (CN) Serial No. 50001 and Higher
MKS-X7700 (SY) Serial No. 10001 and Higher
MKS-X7700 (CN) Serial No. 50001 and Higher
MKS-X7701 (SY) Serial No. 10001 and Higher
MKS-X7702 (SY) Serial No. 10001 and Higher
MKS-X7040 (WW) Serial No. 10001 and Higher
MKS-X7041 (WW) Serial No. 10001 and Higher
MKS-X7042 (WW) Serial No. 10001 and Higher
PWS-100SC1 (SY) Serial No. 140001 and Higher
PWS-100SC1 (CN) Serial No. 540001 and Higher
PWS-110SC1 (SY) Serial No. 110001 and Higher
PWS-110SC1 (CN) Serial No. 510001 and Higher
For MKS-X2700/MKS-X7700/PWS-100SC1/PWS-
110SC1
Attention-when the product is installed in Rack:
1. Prevention against overloading of branch circuit
When this product is installed in a rack and is supplied
power from an outlet on the rack, please make sure
that the rack does not overload the supply circuit.
2. Providing protective earth
When this product is installed in a rack and is
supplied power from an outlet on the rack, please
confirm that the outlet is provided with a suitable
protective earth connection.
3. Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the
rack is within the specified limit of this product.
4. Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please
make sure that the rack does not achieve hazardous
condition due to uneven mechanical loading.
5. Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer
to the specifications of the Operation Manual.

ICP-X7000
2 (P)
For MKS-X2700/MKS-X7700/PWS-100SC1/PWS-
110SC1
When installing the installation space must be secured
in consideration of the ventilation and service operation.
.Do not block the ventilation slots at the left side and
right side panels, and vents of the fans.
.Leave a space around the unit for ventilation.
.When the unit is installed on the desk or the like, keep
the following space for service operation.
MKS-X2700
Right, Left: 4 cm or more
Rear: 10 cm or more
MKS-X7700
Right, Left: 4 cm or more
Rear: 10 cm or more
PWS-100SC1
Right, Left: 4 cm or more
Rear: 10 cm or more
PWS-110SC1
Right, Left: 4 cm or more
Rear: 10 cm or more
設置時には，通気やサービス性を考慮して設置スペー
スを確保してください。
.ファンの排気部や通気孔（左側面および右側面）をふ
さがない。
.通気のために，セット周辺に空間をあける。
.作業エリアの確保や，サービス性を考慮し，机上など
の平面に設置する場合は，以下の空間を確保してくだ
さい。
 MKS-X2700
  左右両側面：4cm 以上
  後面： 10cm 以上
 MKS-X7700
  左右両側面：4cm 以上
  後面： 10cm 以上
 PWS-100SC1
  左右両側面：4cm以上
  後面： 10cm以上
 PWS-110SC1
  左右両側面：4cm以上
  後面： 10cm以上
For MKS-X2700/MKS-X7700/PWS-100SC1/PWS-
110SC1
安全のために，周辺機器を接続する際は，過大電圧を
持つ可能性があるコネクターを以下のポートに接続し
ないでください。
: MKS-X2700: MVS，UTIL コネクター
: MKS-X7700: MVS，UTIL コネクター
: PWS-100SC1: LAN コネクター
:PWS-110SC1:LANコネクター
上記のポートについては本書の指示に従ってください。
For ICP-X7000/MKS-X7011/MKS-X7075/PWS-
100SC1/PWS-110SC1
警告
本機は電源スイッチを備えていません。
万一，異常が起きた際に，お客様が電源を切ることが
できるように，設置の際には，機器近くの固定配線内
に専用遮断装置を設けるか，機器使用中に，容易に抜
き差しできるコンセントに電源プラグを接続してくだ
さい。
WARNING
This unit has no power switch.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the
power cord to a socket-outlet which must be provided
near the unit and easily accessible, so that the user can
turn off the power in case a fault should occur.
WARNUNG
Dieses Gerät hat keinen Netzschalter.
Beim Einbau des Geräts ist daher im Festkabel
ein leicht zugänglicher Unterbrecher einzufügen,
oder das Netzkabel mußmit einer in der Nähe
des Geräts befindlichen, leicht zugänglichen
Wandsteckdose verbunden werden, damit sich bei
einer Funktionsstörung die Stromversorgung zum Gerät
jederzeit unterbrechen läßt.
For MKS-X2700/MKS-X7700/PWS-100SC1/PWS-
110SC1
For kundene i Norge
Dette utstyret kan kobles til et IT-strømfordelingssystem.
For ICP-X7000/MKS-X7011/MKS-X7075
CAUTION for LAN port
For safety reason, do not connect the LAN port to any
network devices that might have excessive voltage.
The LAN port of this unit is to be connected only to the
devices whose power feeding meets the requirements
for SELV (Safety Extra Low Voltage) and complies with
Limited Power Source according to IEC 60950-1.
For ICP-X7000/MKS-X7011/MKS-X7075
CAUTION
These products are to be connected only to PoE
networks without routing to the outside plant.
For safety, do not connect the connector for pe-
ripheral device wiring that might have excessive
voltage to the following ports.
: MKS-X2700: MVS, UTIL connectors
: MKS-X7700: MVS, UTIL connectors
: PWS-100SC1: LAN connector
: PWS-110SC1: LAN connector
Follow the instructions for the above ports.

1 (E)
ICP-X7000
Table of Contents
Manual Structure
Purpose of this manual............................................................ 3 (E)
Related manuals...................................................................... 3 (E)
Trademarks.............................................................................. 3 (E)
Contents .................................................................................. 4 (E)
1. Installation
1-1. Operating Environment (Common) ..........................1-1 (E)
1-2. Power Supply ............................................................ 1-1 (E)
1-2-1. Power Specifications........................................1-1 (E)
1-2-2. Recommended Power Cord .............................1-2 (E)
1-3. Installation Space ...................................................... 1-3 (E)
1-3-1. External Dimensions........................................ 1-3 (E)
1-3-2. Installation Space.............................................1-9 (E)
1-3-3. Detailed Dimensions...................................... 1-13 (E)
1-4. Installing the Main Panel.........................................1-17 (E)
1-5. Installing the AUX Panel.........................................1-18 (E)
1-6. Installing the Extension Adaptor.............................1-19 (E)
1-7. Removing and Installing Cap/Diffusion Plate ........1-21 (E)
1-7-1. Removing and Installing Cap/Diffusion Plate
of Switch without Switch Guard.................... 1-21 (E)
1-7-2. Removing and Installing Cap/Diffusion Plate
of Switch with Switch Guard.........................1-22 (E)
1-8. Removing and Installing Switch Cover ..................1-22 (E)
1-9. Replacing Switch Label ..........................................1-25 (E)
1-10. Installing the Menu Panel........................................1-25 (E)
1-11. Rack Mounting........................................................1-26 (E)
1-12. Matching Connectors and Cables............................1-30 (E)
1-13. Input/Output Signals of Connectors ..........................1-31 (E)
1-13-1. MKS-X2700 ..................................................1-31 (E)
1-13-2. MKS-X7700 ..................................................1-32 (E)
1-13-3. MKS-X7701 ..................................................1-33 (E)
1-13-4. MKS-X7702 ..................................................1-34 (E)
1-13-5. MKS-X7011................................................... 1-35 (E)
1-13-6. ICP-X7000, MKS-X7075 ..............................1-35 (E)
1-14. Description of On-board Switches and LEDs.........1-36 (E)
1-14-1. MKS-X2700/MKS-X7700 ............................1-36 (E)
1-14-2. ICP-X7000/MKS-X7075............................... 1-44 (E)
1-14-3. MKS-X7011................................................... 1-54 (E)
1-15. System Connection..................................................1-57 (E)
1-15-1. Example of Connection to MVS-8000X/
7000X ............................................................1-57 (E)
1-15-2. Example of Connection to XVS Series..........1-58 (E)
1-15-3. Example of Connection to NS-BUS ..............1-59 (E)
1-15-4. Example of Connection to External Devices
through AMP over IP.....................................1-60 (E)
1-15-5. Example of Connection of Serial Tally
through a Network .........................................1-61 (E)
1-15-6. Connection Example of Network AUX
Remote........................................................... 1-61 (E)
1-16. Settings of PWS-100SC1/110SC1 .......................... 1-62 (E)
1-16-1. Accessing the Setting Menu ..........................1-62 (E)
1-17. Maintenance Menu..................................................1-65 (E)
1-17-1. Panel Configuration .......................................1-66 (E)
1-17-2. PWS-100SC1/PWS-110SC1 Network
Settings ..........................................................1-72 (E)
1-17-3. Network Settings for Connected Devices......1-75 (E)
1-17-4. Settings for External Protocol........................1-77 (E)
1-17-5. Settings when Using Network AUX
Remote........................................................... 1-78 (E)
1-18. Setting Up Virtual Shot Box/Virtual Menu .............1-83 (E)
1-18-1. Activating Software License.......................... 1-83 (E)
1-18-2. Creating User Account................................... 1-85 (E)
1-19. Setting Up Automation Interface Software ............. 1-87 (E)
1-20. Using Web Applications..........................................1-88 (E)
2. Installation of Options
2-1. Installation of Operation Modules.............................2-1 (E)
2-1-1. Connecting/Disconnecting Fine-Wire
Coaxial Cable................................................... 2-1 (E)
2-1-2. Installing Modules ...........................................2-1 (E)
2-2. Installing the Connector Board (MKS-X7700).........2-6 (E)
2-3. PWS-100SC1 Installing Information ........................2-7 (E)
2-3-1. Operating Environment and Installation
Space................................................................2-7 (E)
2-3-2. Power Supply...................................................2-9 (E)
2-3-3. Rack Mounting ................................................2-9 (E)
2-3-4. Connector Input/Output Signals ....................2-14 (E)
2-3-5. Connectors and Cables...................................2-15 (E)
2-3-6. Settings of Onboard Switch ...........................2-15 (E)

2 (E) ICP-X7000
2-4. PWS-110SC1 Installing Information ......................2-16 (E)
2-4-1. Operating Environment and Installation
Space..............................................................2-16 (E)
2-4-2. Power Supply.................................................2-18 (E)
2-4-3. Rack Mounting ..............................................2-18 (E)
2-4-4. Connector Input/Output Signals ....................2-23 (E)
2-4-5. Connectors and Cables...................................2-24 (E)
2-4-6. Settings of Onboard Switch ...........................2-24 (E)
3. Service Overview
3-1. Troubleshooting......................................................... 3-1 (E)
3-1-1. MKS-X2700, MKS-X7700..............................3-1 (E)
3-1-2. MKS-X7011.....................................................3-1 (E)
3-1-3. ICP-X7000, MKS-X7075 ................................3-2 (E)
3-2. About the Data Backup Capacitor............................. 3-2 (E)
3-3. To Use Indicators Long.............................................3-3 (E)

ICP-X7000 3 (E)
Manual Structure
Purpose of this manual
This manual is the installation manual of Integrated Control Panel Pack ICP-X7000
and the optional units, MKS-X2700 and MKS-X7700 and optional units, and
Switcher Control Station PWS-100SC1/PWS-110SC1.
This manual is intended for use by trained system and service engineers, and de-
scribes the information on installing the ICP-X7000.
Related manuals
The following manuals are prepared for ICP-X7000 and the optional boards and
units.
.Operation Manual (Supplied with ICP-X7000)
This manual describes the overview, system connection example and specifications
of options of ICP-X7000.
.Operation Manual (Supplied with PWS-100SC1/PWS-110SC1)
This manual describes the application and operation of PWS-100SC1/PWS-
110SC1.
.User’s Guide (Supplied with ICP-X7000)
This manual describes the application and operation of ICP-X7000.
.Service Manual (Available on request)
This manual describes service overview, error messages, periodic maintenance and
inspection, replacement of main parts, and etc. of the unit to provide information
required for block-level service.
If this manual is required, please contact your local Sony Sales Office/Service Cen-
ter.
.Factory Service Manual (Available on request)
Parts list, circuit diagram, and board layouts of the unit are included to provide in-
formation required for part-level service.
If this manual is required, please contact your local Sony Sales Office/Service Cen-
ter.
Trademarks
Trademarks and registered trademarks described in this manual are as follows.
.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the Unit-
ed States and other countries.
.Chrome browser and Chrome are trademarks of Google Inc.
.Windows is a registered trademark or a trademark of Microsoft Corporation in the
United States and other countries.
Other system names and product names written in this manual are usually registered
trademarks or trademarks of respective development manufacturers.

ICP-X7000
4 (E)
Contents
This manual is organized by following section.
Section 1 Installation
This section describes the operating environment, power supply, installation space,
rack mounting, connectors, input and output signals of connectors, checking upon
completion of installation, system configuration, and setup.
Section 2 Installing the Options
This section describes the installation of option.
Section 3 Service Overview
This section describes the troubleshooting and periodic inspection and maintenance.

ICP-X7000 1-1 (E)
Section 1
Installation
1-1. Operating Environment (Common)
Operation guaranteed temperature: +5 dC to +40 dC
Performance guaranteed temperature: +10 dC to +35 dC
Operating humidity: 10 % to 90 %
Storage temperature: _20 dC to +60 dC
Mass
ICP-X7000 (4ME): Approx. 39.0 kg
ICP-X7000 (3ME): Approx. 30.0 kg
ICP-X7000 (2ME): Approx. 22.0 kg
MKS-X7075: Approx. 2.0 kg
MKS-X7011: Approx. 2.5 kg
MKS-X2700: Approx. 8.0 kg
MKS-X7700: Approx. 15.0 kg
Prohibited locations for installation
.Areas where the unit will be exposed do direct sunlight
or any other strong lights.
.Dusty areas
.Areas subject to vibration.
.Areas with strong electric or magnetic fields.
.Areas near heat sources.
.Areas where is subject to electrical noise.
.Areas subject to static electricity
Ventilation
The inside of the MKS-X2700/MKS-X7700 is cooled by a
fan (side on the rear).
The power supply can be damaged if the exhaust vent (side
on the rear) and air intake (front panel) are blocked or the
fan is stopped.
1-2. Power Supply
1-2-1. Power Specifications
1. MKS-X2700/MKS-X7700
Power requirements: AC 100V to 240 V ?10 %
Power frequency: 50/60 Hz
Current consumption:
MKS-X2700: Maximum 0.5 A
MKS-X7700: Maximum 1.0 A
n
As the inrush current flows at turn-on, the capacity of the
AC power source must be commensurate with this load.
If the capacity of the AC power is not adequately large, the
AC power source breaker will operate or the unit will
abnormally operate.
Inrush current:
MKS-X2700: Maximum 85 A (at peak)/20 A r.m.s (AC 240 V)
MKS-X7700: Maximum 90 A (at peak)/20 A r.m.s (AC 240 V)
2. ICP-X7000, MKS-X7075, MKS-X7011
ICP-X7000, MKS-X7075, and MKS-X7011 operate with
power supplied from the PoE HUB or the supplied AC
adaptor. Both of these power supplies can be operated as
redundant power supply.
With respect to the model name of recommended PoE
HUB, contact your local Sony Sales Office/Service Center.
AC adaptor power: AC100 V to 240 V 50/60Hz
Current consumption:
ICP-X7000 (per row): Maximum 0.3 A
MKS-X7075: Maximum 0.2 A
MKS-X7011: Maximum 0.3 A
Inrush current:
ICP-X7000 (per row): 70 A (at peak), 10 A r.m.s. (AC 240 V)
MKS-X7075: 70 A (at peak), 10 A r.m.s. (AC 240 V)
MKS-X7011: 70 A (at peak), 10 A r.m.s. (AC240 V)

ICP-X7000
1-2 (E)
1-2-2. Recommended Power Cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
.Use the approved Power Cord (3-core mains lead)/Appli-
ance Connector/Plug with earthing-contacts that con-
forms to the safety regulations of each country if appli-
cable.
.Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power
Cord/Appliance Connector/Plug, please contact your
local Sony Sales Office/Service Center.
w
.Never use an injured power cord.
.Plugging the power cord in the AC inlet, push as far as it
will go.
Specified power cord
For MKS-X2700/MKS-X7700
For ICP-X7000,MKS-X7075, MKS-X7011
(For AC adaptor)
For customers in the U.S.A. and Canada
1Power cord, 125 V 10 A (2.4 m) : 1-551-812-11
AC inlet
1
For customers in the U.S.A. and Canada
1Power cord, 125 V 7 A (2.0 m) : 1-846-101-21
AC Adaptor
1
For customers in the all European countries
1Power cord, 250 V 10 A (2.5 m) : 1-782-929-12
1AC inlet
For customers in the all European countries
1Power cord, 250 V 2.5 A (2.0 m) : 1-575-131-82
1AC Adapter

ICP-X7000 1-3 (E)
1-3. Installation Space
1-3-1. External Dimensions
Main panel/AUX panel*/Menu panel
*A configuration using MKS-X7017/X7018/X7019 independently is called “AUX panel” in this manual.
584.8
Unit: mm
160
146
473 64
863
1522
1376.8 72.672.6
60140
102
9.8
93
84
90
1482
768.6
42446
213
221

ICP-X7000
1-4 (E)
Main panel (COMPACT, triple-row)
Unit: mm
846.7
701.5
806.7
72.6 72.6
438.5
96
9.8
90
127 60

ICP-X7000 1-5 (E)
Menu panel (MKS-X7011) detailed dimensions
16013
17.7
27.3117.7 32
14.546
147.852.3
221
213
424
276
416
378
6-M3
Unit: mm

ICP-X7000
1-6 (E)
Extension adaptor (MKS-X7075)
262
146
93
84
Unit: mm

ICP-X7000 1-7 (E)
System interface unit (MKS-X2700)
440
482
44 520
Unit: mm
17.5

ICP-X7000
1-8 (E)
System interface unit (MKS-X7700)
482
440
485.7
17617.5
Unit: mm

ICP-X7000 1-9 (E)
1-3-2. Installation Space
.When using the main panel or the AUX panel to be fit in the adjustment console, drill holes in the adjustment console
with dimensions shown below.
.For dimensions B1, B2, B3, B4, B5, C1, and C2 in the figure below, refer to “Detailed dimensions of main panel/AUX
panel” in Section 1-3-3 below.
.COMPACT: A panel consisting of a module (row: 20XPT, width: 284 mm) or two modules (row: 20XPT, width:
137 mm)
NARROW: A panel consisting of a module (row: XPT, width: 137 mm) and a module (row: XPT, width: 284 mm)
STANDARD: A panel consisting of a module (row: XPT, width: 137 mm), a module (row: XPT, width: 210.5 mm), and
a module (row: XPT, width: 284 mm)
.With respect to curve-shaped installation method, contact your local Sony Sales Office/Service Center.
C1
E
E
E
E
F
F FF
Support plates *1
Support plates *1
*1: The COMPACT type does not require the support plates.
Support plates *1
”Hole”
”Hole”
Unit: mm
Support plates *1
Main panel single-row type
Main panel dual-row type
X1 ?1
X2
X2
4-M5
4-M4
62.3 (rear side)
67.2 (front side)
62.3 (rear side)
67.2 (front side)
11.5 (Recommended value)
11.5 (Recommended value)
100
C2
X1 ?1
100 125
125
1257
7
25
44.5
146.4
B1/2
B1
B2/2
B2
252525
77
E-E
E-E
F-F
F-F
125
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT

ICP-X7000
1-10 (E)
STANDARD
COMPACT
Main panel size and combination of modules example
(Module Size: 137mm/210.5mm/284mm)
NARROW

ICP-X7000 1-11 (E)
E
E
FF
FF
Support plates *1
Unit: mm
C2
X1 ?1
6-M4
8-M4
62.3 (rear side)
62.3 (rear side)
67.2 (front side)
67.2 (front side)
11.5 (Recommended value)
11.5 (Recommended value)
146.4146.4
B3/2
B3
146.4146.4146.4
B4/2
B4
7
7
E-E
E-E
F-F
F-F
X2 100
125
2525
125
E
E
Support plates *1
Support plates *1
C2
X1 ?1
7
7
X2 100
125
2525
125
Support plates *1
”Hole”
”Hole”
Main panel 3-row type
Main panel 4-row type
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT
*1: The COMPACT type does not require the support plates.

ICP-X7000
1-12 (E)
Unit: mm
4-M5
2 (Recomm- ended value
F F
44.5
B5/2
B5
E-E
F-F
TYPE X1 X2
STANDARD
NARROW
SHORT SIZE FULL SIZE FULL SIZE
36XPT 845.7 1285 783
28XPT 691.3 1131 628
20XPT 536.9 976 474
36XPT 845.7 1505 783
28XPT 691.3 1351 628
20XPT 536.9 1196 474
E
ESupport plates (only for FULL SIZE)
C1
77 X1 1
7
7
X2 100
125
25 25
125
AUX panel
”Hole”
SHORT SIZE: A panel consisting of only MKS-X7017/X7018/X7019
FULL SIZE: A panel consisting of a combination of MKS-X7017/X7018/X7019 and the following model
MKS-X7020/X7021/X7023/X7024/X7026/X7031TB/X7032/X7033/X7035, etc.