
日本語
安全のために
ソニー製品は安全に充分配慮して設計されています。しかし、電気製品はまち
がった使い方をすると、火災や感電などにより死亡や大けがなど人身事故につな
がることがあり、危険です。
事故を防ぐために次のことを必ずお守りください。
安全のための注意事項を守る。
ˎ
定期点検を実施する
ˎ
長期間安全に使用していただくために、定期点検を実施することをおすすめし
ます。点検の内容や費用については、ソニーのサービス担当者または営業担当
者にご相談ください。
故障したら使用を中止する
ˎ
ソニーのサービス担当者、または営業担当者にご連絡ください。
万一、異常が起きたら
異常な音、におい、煙が出たら
接続ケーブルを抜く。
ソニーのサービス担当者、または営業担
当者に修理を依頼する。
炎が出たら すぐに接続ケーブルを抜き、消火する。
警告表示の意味
説明書および製品では、次のような表示をしてい
ます。表示の内容をよく理解してから本文をお読
みください。
この表示の注意事項を守らないと、火災や感電な
どにより死亡や大けがなど人身事故につながるこ
とがあります。
この表示の注意事項を守らないと、感電やその他
の事故によりけがをしたり周辺の物品に損害を与
えたりすることがあります。
注意を促す記号
行為を禁止する記号
下記の注意を守らないと、火災や感電によ
り死亡や大けがにつながることがありま
す。
外装をはずさない、改造しない
外装をはずしたり、改造したりすると、感電の原因となります。
内部の調整や設定および点検を行う必要がある場合は、必ずサービス
トレーニングを受けた技術者にご依頼ください。
内部に水や異物を入れない
水や異物が入ると火災や感電の原因となることがあります。
万一、水や異物が入ったときは、すぐに接続ケーブルを抜いて、ソニー
のサービス担当者または営業担当者にご相談ください。
油煙、湯気、湿気、ほこりの多い場所では設置・使用しない
上記のような場所で設置・使用すると、火災や感電の原因となります。
下記の注意を守らないと、けがをしたり周辺の
物品に損害を与えることがあります。
メモリースティックスロットに異物を入れない
指定のメモリースティック以外のものを入れると、火災や感電の原
因となることがあります。
ネットワーク端子について
ご注意
ネットワークケーブルご使用の際は、輻射ノイズによる誤動作を防ぐため、シー
ルドタイプのケーブルを使用してください。
概要
RCP-1500シリーズは、ソニーのスタジオ/中継用カメラの設定や操作をするた
めのリモートコントロールパネルです。
CD-ROMマニュアルの使いかた
Adobe Readerがインストールされたコンピューターで、取扱説明書を閲覧でき
ます。
Adobe Readerは、Adobeのウェブサイトから無償でダウンロードできます。
1CD-ROMに収録されているindex.htmlファイルを開く。
2読みたい取扱説明書を選択してクリックする。
CD-ROMが破損または紛失した場合は、お買い上げ店またはソニーのサービス窓口
˜
経由で購入できます。
仕様
一般
電源 DC 10.5 V 〜30 V
消費電力 4 W
動作温度 5 ℃〜 40 ℃
質量 1.8 kg
外形寸法図(単位:mm)
67
85
102
355
67
85
102
332.2
310
2- 5
入出力
REMOTE
CCU/CNU
AUX
EXT I/O
RJ-45型8ピン ( 1)
8ピンマルチコネクター、凹(1)
8ピンマルチコネクター、凹(1)
9ピン、 凹( 1)
付属品
オペレーションガイド(1)
オペレーションマニュアル(CD-ROM)( 1)
別売品
外部I/Oコネクター JAE DE-9PF-N 1-568-182-11
CCA-5-3 リモートケーブル(3 m)
CCA-5-10 リモートケーブル(10 m)
CCA-5-30 リモートケーブル(30 m)
この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電
波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ず
るよう要求されることがあります。
VCCI-A
本機の仕様および外観は、改良のため予告なく変更することがありますが、ご了
承ください。
お使いになる前に、必ず動作確認を行ってください。故障その他に伴う営業上
の機会損失等は保証期間中および保証期間経過後にかかわらず、補償はいたし
かねますのでご了承ください。
English
Before operating the unit, please read this manual thoroughly and retain it for
future reference.
For the customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
All interface cables used to connect peripherals must be shielded in order to
comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC
Rules.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-003.
For the customers in Europe
This product with the CE marking complies with the EMC Directive issued by the
Commission of the European Community.
Compliance with this directive implies conformity to the following European
standards:
EN55103-1: Electromagnetic Interference(Emission)
ˎ
EN55103-2: Electromagnetic Susceptibility(Immunity)
ˎ
This product is intended for use in the following Electromagnetic Environment:
E4 (controlled EMC environment, ex. TV studio).
For the customers in Europe, Australia and New Zealand
WARNING
This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
For the customers in Europe
This product has been manufactured by or on behalf of Sony Corporation, 1-7-1
Konan Minato-ku Tokyo, 108-0075 Japan. Inquiries related to product compliance
based on European Union legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters, please refer to the
addresses provided in the separate service or guarantee documents.
This apparatus shall not be used in the residential area.
For the State of California, USA only
Perchlorate Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate
For the customers in Taiwan only
About the network connector
CAUTION
When you connect the LAN cable of the unit to peripheral device, use a
ˎ
shielded-type cable to prevent malfunction due to radiation noise.
For safety, do not connect the connector for peripheral device wiring that
ˎ
might have excessive voltage to this port.
4-541-888-01(1)
Remote Control Panel
オペレーションガイド
Operation Guide
RCP-1500
RCP-1501
RCP-1530
© 2014 Sony Corporation Printed in Belgium
お買い上げいただきありがとうございます。
電気製品は、安全のための注意事項を守らないと、火災や人身事故に
なることがあります。
この説明書には、事故を防ぐための重要な注意事項と製品の取り扱いかたを示してあ
ります。この説明書をよくお読みのうえ、製品を安全にお使いください。お読みになっ
たあとは、いつでも見られるところに必ず保管してください。