Steelcase 462 Leap Plus User manual

If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2006 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Page 1 of 3
939546235 Rev B
462 Leap® Plus Chair Cover Replacement Instructions

Page 2 of 3
939546235 Rev B
1
1. Slide seat fully forward while holding the
seat slide lever.
2. Disengage the quick release located on
the left side of the chair between the
platesbetween the plates.
SEAT SLIDE LEVER
2
REAR
FRONT
QUICK RELEASE TAB
FRONT REAR

Page 3 of 3
939546235 Rev B
3
3. Unscrew the two (2) front
screws to remove the bearing
plate.
NOTE: After the bearing
plate screws are removed,
the chair back is free to
move. Hold the chair back
firmly to avoid possible injury.
4. Remove cowl as shown.
5. Reverse steps to
reassemble.
BEARING PLATE
4
COWL