TESTO 270 How to use

testo 270 · Deep-frying Oil Tester
Short manual

Pos: 1 /TD/Kurzan leitungen/testo 270 neu 2 014/KAL 270 neu 2014 @ 16\mod_14 13185969036_79.doc x @ 200222 @ @ 1
Preparation
Plastic
components may
not come into
contact with the
cooking oil.
Do not
touch the hot
probe. Danger of
burning!
Remove fried
goods before
measuring.
Wait until ubbles
no longer rise to
the surface
(approx. 5 min).
Observe
minimum
distance of 1 cm
to metal objects.
Measure in hot
oil (min. 40 °C,
max. 200 °C).
Measurement
Switch
instrument on
[].
Immerse sensor in
hot oil. Observe
min/max marks!
1. Move sensor in oil (adjustment time
approx. 30 s)
Auto Hold activated:
- Auto Hold in the display indicates the
end of the measurement. The TPM
value and the display colour flash
until the final TPM value is
reached.
- Final value is fixed.
Auto Hold deactivated:
- when the temperature display no
longer changes, a stable TPM final
value has been reached.
> To fix measurement values: briefly
press [Hold] (<1 s).
2. To return to measurement mode:
briefly press [Hold] (<1 s).
Note the recorded
measurement values.

Care and maintenance
Cleaning Accuracy test
Your specific starting value:
_______%TPM
Clean instrument with mild
detergent. Rinse sensor under
running water and dry carefully with
a soft paper towel.
For a fast and easy instrument test,
we recommend you carry out an
accuracy test according to the
instruction manual.
If the oil type or the supplier is
changed, a new reference value
must be determined.
For an accurate
instrument test
and/or
correction, of if
measurement
values are
implausible, we
recommend
calibration and
adjustment in
Testo reference
oil.
=== Ende der Li stef ür Textmarke Inhalt ===

0970 2751 en 02 V01.00
www.testo.co.kr
www.nubicom.co.kr
www.itestoshop.co.kr