1312
Digital thermo-hygrometer
Digital thermo-hygrometer
• Clean the instrument with a soft damp cloth. Do not use
solvents or scouring agents.
• Protect it from moisture.
3. Getting started
• Remove the protective foil from the display.
• Remove the magnetic holder.
• Open the battery compartment and insert a new battery
1,5 V AAA, ensure that the batteries' polarities are cor-
rect. Close the battery compartment again.
• All segments will be displayed for a short moment.
• The device is ready for use.
• The upper display will show the indoor temperature.
• The lower display will show the indoor humidity.
• Remove the battery to shut down the device.
4. Positioning and fixing
• Fix the magnetic holder with the enclosed adhesive at
your desired location. Please clean the surface before.
• The device can also be positioned on a flat surface by
securing the holder to the bottom.
5. Troubleshooting
Problems Solutions
No display ➜ Ensure that the battery
polarity is correct
➜ Change the battery
Incorrect indication ➜ Change the battery
Indication LL/HH ➜ Outside measuring range
6. Waste disposal
Never dispose of empty batteries and re-
chargeable batteries in household waste.
As a consumer, you are legally required to take
them to your retail store or to an appropriate
collection site depending on national or local
regulations in order to protect the environment.
The symbols for the heavy metals contained
are: Cd=cadmium, Hg = mercury, Pb=lead
This instrument is labelled in accordance
with the EU Waste Electrical and Electronic
Equipment Directive (WEEE).
TFA_No. 30.5051_Anleitung_11_20 29.11.2020 17:21 Uhr Seite 7
