Trust MD-4100 User manual

MD-4100 ADSL MODEM-ROUTER
1
UK
Product information
A: Power indicator
B: LAN port 1 indicator
C: LAN port 2 indicator
D: LAN port 3 indicator
E: LAN port 4 indicator
F: ADSL data indicator
G: ADSL connection indicator
H:Modem ready indicator
I: ADSL line connection
J: Reset switch
K: LAN port 1
L: LAN port 2
M: LAN port 3
N: LAN port 4
O: Power connector
P: Power switch
F
B
C
A
H
G
E
D
J
K
L
M
N
O
I P
Connect modem
1
Connect ADSL cable to ADSL line connection ‘I’
ADSL

MD-4100 ADSL MODEM-ROUTER
2
2
Connect a splitter/filter (not included) to telephone
line
Connect modem to splitter/filter
Connect phone to splitter/filter
Splitter/filter only needed for correct phone
functionality
3
Connect power adapter to Power connector ’O’
4
Plug power adapter into the wall outlet.
5
Power on modem
POWER

MD-4100 ADSL MODEM-ROUTER
3
UK
6
Power indicator (A) will lid continuously
ADSL connection indicator flashing
7
Wait max. 5 minutes for ADSL indicator to lid
continuously. If it keeps blinking, the ADSL line is
not properly connected or the ADSL service is not
(yet) activated. Check with your internet service
provider.
8
Connect the supplied network cable to input (N~K).
9
Shut down computer
Connect the network cable to computer
Start your computer again.
_
___
- - - -
_
___
5 Min
Shutdown Connect Start

MD-4100 ADSL MODEM-ROUTER
4
Configure modem
10
Open an Internet browser on the computer and go
to site http://10.0.0.2
11
OK Æ12
ERROR: Check Appendix A
12
Fill in username and password
me = admin er
Default :
1. Userna
2. Password = epicrout
3. OK
3
2
1

MD-4100 ADSL MODEM-ROUTER
5
UK
13
‘Automatic Setup’
14
Select your Country
If country not listed follow steps appendix C
15 Select your ISP
If ISP not listed follow steps appendix C

MD-4100 ADSL MODEM-ROUTER
6
16
Depending on ISP or setting this window
will appear. When there is no field for
username or password Æ17
1. Fill in internet account ‘username’ and 2x
‘password’
2. ‘Save Setting’ Æ18
For correct username and password check
ISP information
17
‘Save Setting’
If fixed/static IP is needed by your ISP
choose IP mode ‘static IP’ and fill in the IP
address, subnet mask and gateway
specified by your ISP.
18 Wait…
19 ‘Back To Home’ (Back to main menu)
Finish configuring modem
2
1

MD-4100 ADSL MODEM-ROUTER
7
UK
Change modem username/password
1
2
3
4
5
20
It is recommended to change the
modem username and password
This is not the username and password
from your ISP account
1. ‘Advanced Setup’
2. ‘ADMIN PRIVILEGE’
3. ‘Admin Password Configuration’
21
1. Specify current password (default:
‘epicrouter’)
2. Specify Administrator name
3. Specify New Password (2x)
4. Submit
5. Save Configuration
22 Save & Reboot
Modem Username and password are
changed.
Æ
3
2
1

MD-4100 ADSL MODEM-ROUTER
8
1
2
3
23
1. Specify new username
2. Specify new password
3. OK
You entered the modem configuration menu
again
Browse Internet
24
Open Internet Explorer
Enter a website (example) www.trust.com
Modem is working and connected to internet.
If no page appears check out appendix B
Internet Explorer settings
Notes
This modem only works on analogue (POTS, PSTN, Annex A) ADSL or DSL/TDSL line
The built in firewall is enabled by default. If you want to disable it see the English LAN manual on CD-
ROM.
Before installation make sure your ADSL line and account are activated.
This modem is not compatible with SDSL standard.
To share you files and printer between the computers connected to the modem/router see the English
LAN Manual on CD-ROM.
To play games over the LAN it must be supported by the game refer to the instructions from the game
how to configure it.
To configure the advanced router options from the modem/router see the English advanced manual on
CD-ROM.
If you have any problems, go to www.trust.com/14357 (also for UK version item no. 14358) for FAQ, firmware
and manuals.

MD-4100 ADSL MODEM-ROUTER
9
UK
Appendix A: Check network settings Windows XP
1
Set up your network card for automatic
TCP/IP address assignment:
A. Click ‘Start’.
B. Select ‘Settings’.
C. Choose ‘Network Connection’.
D. Right-click the network adapter
connected to the modem.
E. Choose ‘Properties’.
F. Click the ‘Internet Protocol’ item.
G. Click ‘Properties’.
H. Set two options to automatic.
I. Close all screens by clicking the OK
buttons. No need for restart.
J. Read the ‘Internet Explorer’ appendix
B.
2
E
D
B
Windows XP
A
C

MD-4100 ADSL MODEM-ROUTER
10
3
I
H
F
G
Appendix A: Check network settings Windows 2000
1
Set up your network card to TCP/IP address
assignment:
A) Right click ‘My Network Places’.
B) Choose ‘Properties’.
C) Right-click the network adapter
connected to the modem.
D) Choose ‘Properties’.
E) Click TCP-IP item
F) Click ‘Properties’.
G) Set two options to automatic.
H) Close all screens by clicking the OK
buttons. No need for restart.
I) Read the ‘Internet Explorer’ Appendix
B.
B
A
Windows 2000

MD-4100 ADSL MODEM-ROUTER
11
UK
2
3
C
D
H
G
E F

MD-4100 ADSL MODEM-ROUTER
12
Appendix A: Check network settings Windows 98 / Me
1
Set up your network card for automatic
TCP/IP address assignment:
A) Right click ‘Network
Neighbourhood’.
B) Choose ‘Properties’.
C) Click TCP-IP item
D) Click ‘Properties’.
E) Click ‘IP Address’ Tab
F) Set address to ‘Automatic’
G) Click ‘DNS configuration’ Tab
H) Set to disable DNS
I) Click ‘Gateway’ Tab
J) Make Gateway entry empty.
K) Close all screens by clicking
the OK buttons. The computer
will restart.
L) Read the ‘Internet Explorer’
Appendix B.
2
B
A
Windows 98 / Me
F
E
D
C

MD-4100 ADSL MODEM-ROUTER
13
UK
3
H
G
K
J
I

MD-4100 ADSL MODEM-ROUTER
14
Appendix B: Check Internet Explorer (Windows XP, 2000, Me, 98)
1
Open Internet Explorer follow these steps:
A. Open Tools -> ‘Internet Options’.
2 B. Click the ‘Connections’ tab.
C. Click ‘Never Dial a connection’.
D. Click on ‘LAN Settings’.
3
E. Switch off all Proxy setting options.
F. Click ‘OK’ for all screens to close and save the
settings.
G. Go back to step 10
A
D
C
B
F
E

MD-4100 ADSL MODEM-ROUTER
15
UK
Appendix C: setting up non-listed ISP
1
Use this option only when your provider is not listed
or you have a non-standard service from your
provider.
You need to know all the details about
your connection to complete. Call your
internet service provider when needed.
Select: ‘Manual Setup’
2
1. Choose the required ‘Encapsulation’
from pull down menu:
PPPoA VCMUX or LLC
Bridged/Routed Ethernet RFC1483 /
dynamic VCMUX or LLC
Bridged/Routed Ethernet RFC1483 /
static IP VCMUX or LLC
PPPOE VCMUX or LLC
2. Fill in ‘VPI’ and ‘VCI’ number from ISP.
3. Fill in items, which are required for your
Internet connection. Items that are not
required by your ISP can be left empty.
4 ‘Save Setting’ Æ24
To use Bridged/Routed Ethernet
RFC1483 / static IP choose IP mode
‘static IP’ and fill in the IP address, subnet
mask and gateway specified by your ISP
and save settings.
If password required specify it at ‘Input
Password’ and ‘Confirm Password’
1
2
3
4

MD-4100 ADSL MODEM-ROUTER
16
Appendix D: Reset modem
This erases all user settings. Do this when:
- Lost admin password.
- The product does not respond anymore after
reboot.
- Settings where changed many times and the
connection still does not work.
Keep reset button pressed for 10 sec.
‘Ready’ indicator (H) turns off.
As soon as ‘ready’ indicator (H) lights again the
modem is ready for use.
Reconfigure the modem to get connected to
internet again.
Safety
• Do not open or repair this device.
• Disconnect the power plug from the mains supply before cleaning the device. Do not use a liquid cleaner or a
spray, use a dry cloth.
• Keep this device away from liquids, such as water.
• Do not use this device in a damp environment, such as a bathroom, damp basement or swimming pool.
• This device meets the essential requirements and other relevant conditions of the applicable European
directives. The Declaration of Conformity (DoC) is available at www.trust.com/14357/ce
Warranty & copyright
• This product has a two-year manufacturer's warranty which is effective from the date of purchase. For more
information see www.trust.com/warranty
• Reproduction of this manual or any part of it is prohibited without permission from Trust International B.V.