UNIS UP&AWAY User manual

Operation Manual
www.universal-space.com

Rev 1.0
1
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries. All repairs must be performed to original
manufacturer specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
IMPORTANT SAFETY INSTRUCTIONS .................................................................. 2
1. SPECIFICATIONS ............................................................................................... 4
2. PACKAGE CONTENTS........................................................................................ 5
3. PART NAME ....................................................................................................... 6
4. SET UP & INSTALLATION.................................................................................. 7
5. HOW TO PLAY..................................................................................................13
6. GAME OPTIONS...............................................................................................14
7. MAINTENANCE, INSPECTION .........................................................................18
8. OVERALL CONSTRUCTION .............................................................................19
9. Decal ................................................................................................................35
Wiring diagram....................................................................................................38

Rev 1.0
2
Thank you for purchasing UP&AWAY from Universal Space.We hope you enjoy
the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel should
under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may cause
fire, electric shock or personal injury. Unplug the game from the outlet when not in use, when
moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending on
the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.
Use the following safety guidelines to help ensure your own personal safety and to help protect
your equipment and surrounding environment from potential damage.

Rev 1.0
3
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury and/or
machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Rev 1.0
4
1. SPECIFICATIONS
Rated power supply: AC110V /60Hz
Min. Power consumption: 70W
Max. Power consumption：450W
Dimensions：W1100×D2505×H2546.5 (mm)
Weight：Approximately300kg
NOTICE: After turning off the game, please wait at least 1 minute before
restarting again.
Note: The contents of this manual may be updated without notice.

Rev 1.0
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
If any items are found to be missing, please contact your sales representative for
help immediately.
NOTE: Part models are subject to change without notice.
No. Part No. Code Name Spec. Qty Picture
1 U106-438-000 23301000001 Power code 10A/250V-1.8M 1
2 U106-415-000 21901000013 Fuse Φ5×20mm
T10A 250VAC 1
3 U106-439-000 41000000114 Ball VBS75 50
4 U106-801-000 41411301001 Manual 1
5 U106-440-000 25300171002 Lock 171 1
6 U106-441-000 25300172002 Lock 171B 1

Rev 1.0
6
3. PART NAME

Rev 1.0
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 2) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
4.1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service Area: 500mm
Play Area: 500mm
Play zone

Rev 1.0
8
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game. If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off the
ground by 5mm. Repeat the same for all levelers.
4.3 Transporting the Machine
If you need to move the game, adjust the levelers back to an “up” position so the casters touch
the ground.
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a higher level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
Leveler Caster
Move
About 5 mm
Fix
Make sure the machine is level with the ground and all the
adjustable legs should stick to the floor closely.
NOTICE
Leveler Caster
Fix

Rev 1.0
9
4.4 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match the
available power source. Please refer the label of the machine.
Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
Avoid putting many loads on one electrical outlet as it could generate heat and fire
resulting from overload.
Connect the grounding conductor to the earth terminal (GND):










WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be stepped
on or tripped over.
Power socket
Power outlet
Power plug
Power cord
Power plug

Rev 1.0
10
4.4 How To Install Marquee Assy.
Step 1: Remove 1 screw from both
sides on top of the cabinet.
Step 2: Lift up the marquee in the correct position by 2 people. One needs to
support the marquee in the front. The other needs to install 4 provided screws
(M6*40) from the accessory box to fix the marquee.

Rev 1.0
11
Step 3: Take the connection metal
plate from accessory box. Fix it to
the cabinet with 8 screws (M6*20)
as the picture shown.
Step 4: Find the cable connector at the back of the cabinet. Then connect it to the other end
from the top marquee hole.

Rev 1.0
12
4.5 How To Install Seat Assy.
Step 1: Push the seat assembly at the front of the cabinet. Make seat assembly
mounting holes and cabinet mounting holes horizontal alignment.
Step 2: Take out seat light cable connector, and get it though the hole on the bottom of
the cabinet. Then connect it to the other end from the ticket door.
Step 3: Put the seat assembly against the cabinet, aligning the seat mounting holes
with cabinet mounting holes

Rev 1.0
13
5. HOW TO PLAY

Rev 1.0
14
6. GAME OPTIONS
Check the attached I/O chart and schematic diagram, PC plan available machine input and
output correspond to each connection position. Based on the DIP adjustment can be set the
machine control signal.
DIP regulating reference I/O list, capital letters for factory Settings, user can adjust
themselves according to the operation condition.
Main Board

Rev 1.0
15
IO Settings
SW1
SW2
Item Content 1 2 3
Coin per
game
1 ON ON ON
2 off on on
3 on off on
4 off off on
10 on on off
1/2 off on off
1/3 on off off
1/4 off off off
Item Content 4 5 6
Game
time
20S ON
ON ON
30S off on on
35S on off on
40S off off on
45S on on off
50S off on off
55S on off off
60s off off off
Item Content 7 8
Demo
music
120s on
on
180s on
on
240s on off
OFF OFF
OFF
Item Content 1 2 3 4
BONUS
Ticket
5 on on on on
10 off on on on
15 on off on on
20 off off on on
25 ON ON OFF ON
30 off on off on
35 on off off on
40 off off off on
45 on on on off
50 off on on off
55 on off on off
60 off off on off
70 on on off off
80 off on off off
90 on off off off
100 off off off off
Item Content 5 6
Credit
for
Bonus
+1
0 ON
ON
1 off
on
2 on off
3 off off
Item Content 7
BONUS
memory
YES ON
NO off
Item Content 8
Ticket
error
Continue to play ON
Call attendant off

Rev 1.0
16
SW3
SW4
Clear memory：
Hold on TEST button and press Reset button, then unclench Reset button.
The memory must be cleared if game machine is passed when shipped out.
Error display:
If the input signal is not normal when you turn on the machine, the score LED displays SW
numbers with wrong.
Item Content 1
Score
mode
Ticket ON
Point off
Item Content 2 3 4
Ticket
per ball
1 on on on
2 off on on
3 ON OFF ON
4 off off on
5 on on off
10 off on off
11 on off off
20 off off off
Item Content 5 6
Points
per
ticket
10 ON ON
20 off on
30 on off
40 off off
Item Content 7 8
Payout
mode
*
1:1 ON ON
1:2 off on
1:3 on off
no
payout off off
Item Content 1 2
Mercy
ticket
0 on on
1 OFF
ON
2 on off
3 off off
Item Content 3
Fixed
ticket
YES on
NO OFF
Item Content 4 5
Fixed
ticket
setting
0 on on
1 OFF ON
2 on off
3 off off
*Note: Payout mode is to set the proportion
of ticket won to real ticket payout.
1:1 - 1 ticket won and pays 1 ticket.
1:2 – Every 2 tickets won and pays 1 ticket.
1:3 – Every 3 tickets won and pays 1 ticket.

Rev 1.0
17
Error code and solution
Please check the connection of the corresponding cables for each error.
ERROR
CODE CAUSE COUNTERME
E01 Ticket reset button error Change the button in counter panel.
E02 Test button error Change the button in counter panel..
E03 1P target sensor1 error Change the tortoise side initial position sensor.
E04 1P target sensor2 error Change the tortoise side level 1 position sensor.
E05 1P target sensor3 error Change the tortoise side level 2 position sensor.
E06 1P target sensor4 error Change the tortoise side level 3 position sensor.
E07 1P target sensor5 error Change the tortoise side level 4 position sensor.
E09 2P target sensor1 error Change the rabbit side initial position sensor.
E10 2P target sensor2 error Change the rabbit side level 1 position sensor.
E11 2P target sensor3 error Change the rabbit side level 2 position sensor.
E12 2P target sensor4 error Change the rabbit side level 3 position sensor.
E13 2P target sensor5 error Change the rabbit side level 4 position sensor.
E15 1P hole sensor 1 Change the 1st hole sensor on tortoise side.
E16 1P hole sensor 2 Change the 2nd hole sensor on tortoise side.
E17 1P hole sensor 3 Change the 3rd hole sensor on tortoise side.
E18 1P hole sensor 4 Change the 4th hole sensor on tortoise side.
E19 2P hole sensor 1 Change the 1st hole sensor on rabbit side.
E20 2P hole sensor 2 Change the 2nd hole sensor on rabbit side.
E21 2P hole sensor 3 Change the 3rd hole sensor on rabbit side.
E22 2P hole sensor 4 Change the 4th hole sensor on rabbit side.
E23 1P pop up motor sensor Change the DC motor (U106-444-000) on tortoise side.
E24 2P pop up motor sensor Change the DC motor (U106-444-000) on rabbit side.
E83 Coin mech 1 error Check the coin mech 1 wiring or change the coin mech
E84 Coin mech 2 error Check the coin mech 2 wiring or change the coin mech
E19
E18
E17E16E15
E03
E04
E05
E06
E07
E09
E10
E11
E12
E13
E20 E21
E22

Rev 1.0
18
7. MAINTENANCE, INSPECTION
8.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running smoothly.
8.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and pay
attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the
cautionary matters herein stated can cause personal injury or damage to the machine.
• Before servicing the machine, be sure to turn power off. Servicing without turning the
power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent unnecessary
wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire, electric
shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
• Should a problem occur, turn off the power immediately and stop operating the machine.
Unplug the power cord of the service outlet. Operating the machine without correcting the
problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible, install the
machine in a well-lit location, and keep the labels clean at all times. Make sure the labels are
not hidden behind other game machines.
WARNING

Rev 1.0
19
8. OVERALL CONSTRUCTION
8.1 Mechanical Part
8.1.1 Side door assy.
No. Part No. Code Name Qty
1 U106-101-000 20211301002 L bend 1
2 U106-601-000 20611301002 L side plexi. 1
3 U106-102-000 20211301005 Safety net 1
4 U106-601-000 20611301002 R side plexi. 1
5 U106-103-000 20211301003 R bend 1