UNIS emoji ROLLER User manual

Operation Manual
IMPORTANT
NOTE: Some portions of assembly may require additional assistance.
(110V Version)

Emoji Roller GMP Manual
09/17/2022
1
WE ARE HERE TO ASSIST
For parts and service
Have Questions? Contact us!
UNIS SERVICE CENTER
Tel: [phone]
Email: [e-mail]
www.unispartsandservice.com
When contacting Service, you will need the following information
and the name of your authorized distributor.

Emoji Roller GMP Manual
09/17/2022
2
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.......................................................................3
1. SPECIFICATIONS....................................................................................................5
2. CONTENTS OF THE ACCESSORY KIT................................................................... 6
3. PART NAME............................................................................................................7
4. SET UP & INSTALLATION...................................................................................... 8
5. LOCATION OPERATION INSTRUCTIONS............................................................ 13
6. HOW TO PLAY......................................................................................................14
7. GAME OPTION..................................................................................................... 20
8. TROUBLESHOOTING........................................................................................... 28
9. MAINTENANCE & INSPECTION..........................................................................35
10. OVERALL CONSTRUCTION............................................................................... 51
11. WIRING DIAGRAM............................................................................................85

Emoji Roller GMP Manual
09/17/2022
3
Thank you for purchasing Emoji Roller GMP. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE,NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Emoji Roller GMP Manual
09/17/2022
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Emoji Roller GMP Manual
09/17/2022
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz;
Min. Power consumption: 600W
Max. Power consumption: 700W
Dimension: H2624×W1632×D1037 mm
H103.3×W64.2×D40.8 in
Weight: Approximately 914.91lb/415 KG
Model No: C-741
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.

Emoji Roller GMP Manual
09/17/2022
6
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
Following accessories
NOTE: Part models are subject to change without notice.
No.
Part No.
Code No.
Name/SPEC
Picture
Qty
1
E118-2101-00
201.01.900066
Cross recessed hexagon bolt set
M6×30
4
2
E118-2102-00
201.01.030183
Cross recessed hexagon screw
set
M6×40
4
3
E118-2103-00
201.01.008023
Hexagon flat head screw
M6×25
3
4
E118-2104-00
201.01.030024
Cross recessed pan head screw
M4×12
2
5
E118-2105-00
2.53.00171002
171A key
2
6
E118-2106-00
2.53.00172002
171B key
1
7
E118-2109-00
2.33.01.010020
Power cord
3×16AWG 1.8M
1
8
E118-1840-00
2.19.01.000030B
Fuse
Ф5×20mm T10A 250VAC
1
9
E118-1832-00
2.19.01.000012
Fuse
Φ5×20mm T5A 250VAC
10
10
E118-2110-00
4.14.40000576
Manual
1

Emoji Roller GMP Manual
09/17/2022
7
3. PART NAME
Key Components
Spiral slide tube
Marquee assembly
Monitor
Emoji holes
Ball track
Pinball plate
Start button
Refill ticket
button

Emoji Roller GMP Manual
09/17/2022
8
Levele
About 0.2 in/5mm
Leveler
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid.
Place the unit on a dry level surface.
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it
touches the floor, lifting the casters off the ground by 0.2 in/5mm. Repeat the same for all
levelers.
We do not recommend using power tools as they may cause damage.
NOTICE
Make sure the machine is level.
NOTICE
Leveler
Leveler

Emoji Roller GMP Manual
09/17/2022
9
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 500 mm
Service area
Play area
Your unit must be leveled to operate properly.
NOTICE

Emoji Roller GMP Manual
09/17/2022
10
4.4 Machine Installation
Step 1 Place Marquee bracket to the top of the cabinet. Utilize screws to secure the
Marquee bracket.
Step 2 Place LOGO marquee to the Marquee bracket. Connect the connectors. Utilize
screws to secure.
Name
Cross recessed
hexagon screw set
Spec.
M6X40
Qty
4
Name
Cross recessed
hexagon screw set
Spec.
M6X40
Qty
4
Marquee
bracket
Marquee
bracket
LOGO marquee
Screws
Cabinet

Emoji Roller GMP Manual
09/17/2022
11
Step 3 Route the LOGO marquee cable(Label:C) to the Marquee bracket through the Upper
hole.
Route the LOGO marquee cable(Label:F) to the Marquee bracket through the Upper hole.
Utilize cable tie to secure.
Connect the connectors.
Step 4 Place Half round marquee to the middle of the LOGO marquee. Utilize screws to
secure Half round marquee to the Marquee bracket.
Marquee
bracket
Cable(Label:C)
Cable(Label:F)
Connectors
LOGO marquee
Half round marquee
Half round
marquee

Emoji Roller GMP Manual
09/17/2022
12
Finish!
4.5 Card Reader Installation Safety Notice
Take precaution to assure that all wiring voltages are confirmed prior to installation
of card reader. All warranties are void if not properly installed resulting in logic board
damage.
Important: This game is pre-wired to AAMA standards. It is highly recommended to utilize
this wiring for Card reader installation.
Name
Cross recessed
hexagon bolt set
Spec.
M6X30
Qty
2
Front glass
door
Screws

Emoji Roller GMP Manual
09/17/2022
13
5. LOCATION OPERATION INSTRUCTIONS
5.1 First Power On Operation
Step 1 Power on the machine. Open the coin door and there is a meter panel. Press
Settings button to enter the setting menu.
Step 2 Select “Replenish Ball”. The machine will replenish ball to the play area.
Test
Reset
Open the coin door and there is a
meter panel. Press Settings button to
enter the setting menu.
Settings

Emoji Roller GMP Manual
09/17/2022
14
6. HOW TO PLAY
1. Insert coins/Tap card to get the small ball. Track moving to change the drop direction of
right small ball
2. Press START button to release the small ball, Left button releases Left ball, Right button
releases right ball.
3. Small ball hit Emoji holes to activate Spiral track. there will be small balls releasing from
the spiral track and lights flashing.
Note: The number of spiral track small balls is based on the number displayed on the Emoji hole.
Right Track: To change
the drop direction of right
small ball
Left Track: To change
the drop direction of
left small ball
Right Emoji Hole
to Activate the
right spiral track
Small ball
releasing
hole
Left Emoji Hole to
Activate the right
spiral track
Right START
button
Left START
button

Emoji Roller GMP Manual
09/17/2022
15
4. Small balls from Spiral track will go through the Pinball to the pushing table.
4.1 Any small ball passes through left/right Emoji Hole will win a Big ball(Yellow big ball or
Emoji big ball randomly).
4.2 Big ball is released to the box through this exit.
If the box is full of big balls, more big balls will spill over to the pushing plate.
Pinball
Big Ball Exit

Emoji Roller GMP Manual
09/17/2022
16
5. Any small ball passes through middle Emoji Hole will activate turntable lucky draw.
6. 6.1 If Small ball passes through any of the above 4 Emoji Holes, the player can get the
same quantity of tickets as the number showed in the digital board.
6.2 Meanwhile, each Emoji Hole will be lighten up while a ball passing it.
Win Tickets
Win Tickets

Emoji Roller GMP Manual
09/17/2022
17
6.3 Every time when 6 Emoji Holes are all lighten up, the tickets of digital boards will be
doubled in a limit time.
6.4 The double feature can be continually activated in a limit time.
7. Ball Detection: Big & Small balls will be detected after pushing them down to Ball Sink
to internal recycle.
Note: Internal Recycle: The small ball drops down to the bottom balls box, and will be
transported back to the pushing plate.
6 Emoji Holes
Ball Types:
1) Small ball: white ball
2) Big ball: Yellow Ball
3) Big ball: Emoji Ball.
Note: Each big ball has different
ticket values.

Emoji Roller GMP Manual
09/17/2022
18
8. When the player wins an EMOJI TIME on the turntable, the top EMOJI marquee starts to
shake up and down, producing sound effects and flashing lights.
Drop all the small balls from the box which is near the Emoji marquee to reward the player.
9. When the player wins an EMOJI DROP on the turntable, drop all the big balls from the
bottom box.
The baffle of the Big ball box will open. All the big balls will fall to the pushing plate.
After the baffle is closed, the machine adds 10 Big balls automatically.
Top Marquee and
small ball box
EMOJI TIME
image
Big ball box
EMOJI DROP

Emoji Roller GMP Manual
09/17/2022
19
10. Collect 6 different Emoji balls to win BONUS prize.
6 Emoji balls