Universal Space Derby Champion Club User manual

www.universal-space.com
Operation Manual
IMPORTANT
NOTE: Some portions of assembly may require additional assistance.

Derby Champion Club
08/05/2019
1
WE ARE HERE TO ASSIST
For parts and service
Have Questions? Contact us!
UNIS SERVICE CENTER
Tel: [phone]
Email: [e-mail]
When contacting Service, you will need the following information
and the name of your authorized distributor.

Derby Champion Club
08/05/2019
2
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.......................................................................3
1. SPECIFICATIONS....................................................................................................5
2. CONTENTS OF THE ACCESSORY KIT................................................................... 6
3. PART NAME............................................................................................................7
4. SET UP & INSTALLATION...................................................................................... 8
5. HOW TO PLAY......................................................................................................18
6. GAME OPTION..................................................................................................... 19
8. MAINTENANCE & INSPECTION..........................................................................25
9. OVERALL CONSTRUCTION................................................................................. 26
10. WIRING DIAGRAM............................................................................................ 52

Derby Champion Club
08/05/2019
3
Thank you for purchasing Derby Champion Club. We hope you enjoy the
product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE,NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Derby Champion Club
08/05/2019
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Derby Champion Club
08/05/2019
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz
Min. Power consumption: 850W
Max. Power consumption: 1600W
Dimension: W114.81×D117.09×H117.13 in
W2916 ×D2974 ×H2975 mm
Weight：Approximately 2601.5 lb
Approximately 1165kg
Part No: D158
Model No: C-543
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.
2916mm
114.81in
2975mm
117.13in
2974mm
117.09in

Derby Champion Club
08/05/2019
6
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
1. Following accessories
NOTE: Part models are subject to change without notice.
No.
Part No.
Code
Name
Picture
Qty
1
D158-801-000
21901000013
Fuse
2
2
D158-802-000
25300171002
171 key
2
3
D158-803-000
25300172002
171B key
2
4
D158-804-000
23301010020
Power cord
3
5
D158-805-000
20250841076
Wrench
/
1
6
D158-806-000
22604000039
Micro SW
/
2
7
D158-807-000
23302000003
Network cable
2

Derby Champion Club
08/05/2019
7
3. PART NAME
Key Components
NOTE: The installation of the DBV is to be completed by each individual location. (Not included)
Monitor
Side Light Plastic
Marquee Monitor Assembly
Coin Mechanism
Assembly
Platform Assembly
Rail Assembly
Horse Assembly
Stair Assembly
Ticket Dispenser
Assembly
Ready for DBV

Derby Champion Club
08/05/2019
8
Leveler
Leveler
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid.
Place the unit on a dry level surface.
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it
touches the floor, lifting the casters off the ground by 0.2 in. Repeat the same for all
levelers.
We do not recommend using power tools as they may cause damage.
NOTICE
Make sure the machine is level.
NOTICE

Derby Champion Club
08/05/2019
9
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 20 in
Your unit must be leveled to operate properly.
NOTICE
Service area
Play area

Derby Champion Club
08/05/2019
10
4.4 Machine Installation
Before processing with assembly assure you have the following tools.
No.
Name
Picture
1
Phillips screwdriver
2
Wrench
3
Ladder
NOTE: ALL NEEDED HARDWARE AND PARTS ARE MOUNTED ON THE COMPONENT. PLEASE
REMOVE IT BEFORE INSTALLATION.
4.4.1 Marquee Installation
Erect the large marquee as shown below. Utilize Phillips screwdriver to fix it with screws.
Please be careful when installing.
Plug two connectors to connect the large marquee.
4.4.2 Middle Cabinet & Side Cabinets Installation
Put the Middle Cabinet and two Side Cabinets together as shown below. Utilize Phillips
screwdriver to fix 4 connective plates with screws as shown below.
screw holes
Connective Plates

Derby Champion Club
08/05/2019
11
4.4.3 Side Light Plastic Installation
Connect the light plastic cables as shown below. Utilize Phillips screwdriver to fix two ends
with screws as shown below.
4.4.4 Cardboard Installation
Utilize Phillips screwdriver to install the cardboard with screws at the back.
Cardboard
Fix with screws
Light plastic
Fix with screws
Fix with screws
Connect cables

Derby Champion Club
08/05/2019
12
4.4.5 Platform Assembly Installation
Put Platform A and Platform B together as shown below. Utilize Phillips screwdriver to fix
Plate 1 and Plate 2 with screws.
Note: Plate 1 and Plate 2 are installed inside the platform.
4.4.6 Fence Installation
Plug connectors on left bottom side of the fence.
Utilize Phillips screwdriver to fix the fence to the Base Assembly with screws. (The screw
holes are in the inner side of the fence at the bottom.)
The installation method of both sides is the same.
fence
Plate 1
Plate 2
Platform B
Platform A
Horse

Derby Champion Club
08/05/2019
13
4.4.7 Back Box and Front Assembly Installation
Connect cables between the Back Box and the Front Assembly as shown below. Place the
connectors inside the Back Box. Put the Back Box and Front Assembly together. Utilize
Phillips screwdriver to fix them with the 4 connective plate by screws.
4.4.8 Fence Installation
Place the fence to the cabinet. Insert the hinge of the fence to the cabinet first. Utilize
Phillips screwdriver to fix the other side with screws to the cabinet. The installation method
of both sides is the same.
2.Fix with screws
Front Assembly
Back Box
Fence
Fence
1.Insert the hinge

Derby Champion Club
08/05/2019
14
4.5 Linking setting
Kit list:
No.
Part No.
Code No.
Name
Qty
1
D158-448-000
23302000014
Network cable
2
Step 1 Locate the power box at the back of the machine on each side. Plug in the Network
cable to the power box. Route the cable to the middle back box through the hole.
Step 2 Connect the Network cable to the router either 1 to 4 ports.
Step 3 Linking setting. Enter the setting menu. In “Networking Setting” menu, set the
“Player Mode” to “Link mode”. (Default setting is “Link mode”.)
Refer to 6. GAME OPTION for details.
4.6 Card Reader Installation Safety Notice
Take precaution when installing the card reader. Assure that all wring voltages are
confirmed prior to installation of card reader. All warranties are void if not properly
installed resulting in logic board damage.
Player Mode
Single mode/Link mode
MultiPlayWaitingTime
5-30
Back&Save
Back

Derby Champion Club
08/05/2019
15
4.7 110 Voltage Convert to 220 Voltage
Kit list:
No.
Part No.
Code No.
Name
Qty
1
D158-466-000
2160500004
Transducer
2
2
D158-467-000
20841804003
Brake resistance
2
Step 1 Power off the machine.
Step 2 Open the back doors. Locate 3 computers and 3power supplies.
Step 3 Toggle the SW into 230 on all 3 computers. Utilize a tool to toggle the SW to 230
which is inside the power supply on the side. Same operation for all 3 power supplies.
Step 4 Open the back box middle doors. Utilize screwdriver to remove the transducer.
Unplug all pins from the transducer (D158-456-000) and take it out. Utilize screwdriver to
remove 2 screws and take the brake resistance (D158-423-000) out.
brake resistance
transducer

Derby Champion Club
08/05/2019
16
Step 5 Install the 220V transducer (D158-466-000) to the original position. Connect pins
as shown below.
Step 6 Connect the new brake resistance (D158-467-000) cable to the 220V transducer.
Install the new brake resistance to the original place.
Step 7 Locate the line bank on top of the transformer next to the transducer. Unplug
either the Blue cable or the Brown cable on the left side indicated by circle. Reconnect that
pin to the position which is align with the white cable on the right side.
Step 8 Replace the 110V DBV with 220V DBV.
Cable A: Brown, Blue, Yellow/Green
L1
L2
PE
Brown
Blue
Yellow/Green
Cable B: Black, Brown, Blue, Yellow/Green
V
U
W
PE
Black
Brown
Blue
Yellow/Green
Cable C: Black, Brown, Yellow, Orange, Red
COM
FWO
X3
X2
X1
Black
Brown
Yellow
Orange
Red
Left side
Right side
110V
White cable
220V
White cable
Left side
Right side

Derby Champion Club
08/05/2019
17
4.8 Transducer Parameter Setting
4.8.1 For 110V Transducer (D158-456-000) :
Parameter setting:
Parameter
Settings
0-03
d1
1-09
d0.5
1-10
d0.5
1-15
d1
2-00
d1
2-01
d1
4-04
d1
5-00
50
Parameter
Settings
5-01
56
5-02
62
5-03
68
5-04
74
5-05
80
5-06
86

Derby Champion Club
08/05/2019
18
4.8.2 For 220V Transducer (D158-466-000) :
Press “MENU” button to enter parameter Settings. Press “ESC” to exit. Press “ENTER” to
confirm. Press “SHIFT” to change item.
Parameter setting:
5. HOW TO PLAY
5.3 Pull left and right ropes at the same time/ Kick the horse’s belly to accelerate.
5.1 Select single player/multiplayer mode.
5.2 Select a track.
5.4 Press button to jump.
5.5 Pull left rope to turn left; pull right
rope to turn right.
Parameter
Settings
F0.02
2
F0.08
0.5
F0.09
05
F0.10
100
F1.05
2
F2.30
50
F2.31
56
F2.32
62
Parameter
Settings
F2.33
68
F2.34
74
F2.35
80
F2.36
86
F5.00
01
F5.01
02
F5.02
03
F8.01
220
Parameter
Settings
F8.04
1420
F8.06
0.2

Derby Champion Club
08/05/2019
19
6. GAME OPTION
6.1 Adjustment Button Instruction
6.2 Setting Menu
6.2.1 Main Menu 6.2.2 Basic Setting
Basic Setting
Customized Setting
Networking Setting
Game Setting
Input Test
Output Test
Game Reset
Date/Time Setting
Language/语言
Bookkeeping
Daily Record
About This Game
Back to Game
6.2.3 Customized Setting 6.2.4 Networking Setting
Fixed Ticket
0-50
Divided by 2
OFF/ON
Horse color
White/Brow
n
First Tickets
0-200
Second Tickets
0-200
Third Tickets
0-200
Mercy Tickets
0-200
Back&Save
Back
Open the coin door and there is a
meter panel. Press Settings button to
enter the setting menu.
Settings
Test
Reset
Player Mode
Single mode/Link mode
MultiPlayWaitingTime
5-30
Back&Save
Back
Free Play
ON/OFF
Auto Continue ON/OFF
ON/OFF
ON/OFF
Auto Continue Waiting Time
5s-30s
Tickets Out
ON/OFF
Demo Music
ON/OFF
Memory Save
ON/OFF
Volume
1-10
Coins Per Game
1-100
Out of Tickets
Store in memory/
Call Attendant
Back&Save
Back