Universal Space LANE MASTER User manual

Operation Manual
www.universal-space.com

Lane Master Manual
1
For parts and service
Have Questions? Contact us!
International Support Center USA Support Center
Tel: [phone]
Fax: [phone]
Email: ser[email protected]
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Lane Master Manual
2
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual. Failing
to comply can cause severe accidents such as electric shock or other
serious injuries. All repairs must be performed to original manufacturer
specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
IMPORTANT SAFETY INSTRUCTIONS........................................................................ 3
1. SPECIFICATIONS ..................................................................................................... 5
2. PACKAGE CONTENTS.............................................................................................. 7
3. PART NAME ............................................................................................................. 8
4. SET UP & INSTALLATION........................................................................................ 9
5. HOW TO PLAY ........................................................................................................12
6. GAME OPTION .......................................................................................................15
7. ERROR MESSAGE AND RECOVERY ....................................................................19
8. MAINTENANCE & INSPECTION ...........................................................................22
9. OVERALL CONSTRUCTION ...................................................................................26
WIRING DIAGRAM.....................................................................................................43

Lane Master Manual
3
Thank you for purchasing Lane Master. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Lane Master Manual
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Lane Master Manual
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz;
Min. Power consumption: 520W
Max. Power consumption: 580W
Dimension: W65×D115.2×H116.2 in
Weight：Approximately 440 lb
Part No: L105
Model No: C-489
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game parameters are subject to change without notice.

Lane Master Manual
6
This machine will be divided into two parts during transportation.
Display part: W65×D28.8×H82.7 in
Lane part: W64.34×D87.21×H40.12 in
Note: Game parameters are subject to change without notice.

Lane Master Manual
7
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1. Following accessories
NOTE: Part models are subject to change without notice.
No. Part No. Code Name Qty
Picture
1 L105-801-000 25300171002
Key
(171) 6
2 L105-803-000 25300172002
Key
(171B) 1
3 L105-802-000 23301010020
Power cord 1
4 L105-529-000 21901000013
Fuse
(Φ5×20mm
T10A)
1
5 L105-804-000 41440000173
Manual
(170405) 1
6 L105-805-000 20611605027
Bowling ball 4
7 L105-320-000 20211605A001
Cashier door 1
8 L105-525-000 21503000053
Sensor
SW(receive) 2
Please refer
to P20
Disassemble
the lane
sensor
9 L105-526-000 21503000052
Sensor
SW(send) 2

Lane Master Manual
8
3. PART NAME
Service cabinet
Coin Ass
y
.
Mar
q
uee Ass
y
.
Ticket dispenser
Display
Play field

Lane Master Manual
9
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game . If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off
the ground by 0.2 in. Repeat the same for all levelers.
Leveler Caster
Move F
i
Caster
Leveler
About 0.2 in
Move Fix
NOTICE
Make sure the machine is level.

Lane Master Manual
10
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 20 in
Service area
Play area

Lane Master Manual
11
4.4 Marquee Installation
4.4.2 Lift up the marquee above the display frame.
Note: It is recommended to have the minimum of two
staff members available for this installation.
4.4.1 Place the marquee on the display
frame as shown and install hardware
where indicated by the red arrows.
P1
4.4.3 Install the bolts as indicated in the red area and red arrows.
P3
P2

Lane Master Manual
12
4.5 Cabinet Installation
4.5.1 Lane Assembly：
Place 2 Lanes side by side, open the coin door and the ticket door to install the
hardware in the red arrow area. ( Front :P4; Back: P5)
4.5.2 Lane Assembly & Display Assembly:
Place the Lane in front of the display assembly and install as shown.
P4
P6
P5
P7
Connect the Lane Assembly
and Display Assembly.
Install the R&L side
reinforced plates.

Lane Master Manual
13
4.6 Connecting Power
WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match
the available power source. Please refer the label of the machine.
Do not plug the equipment power cables into an electrical outlet if the power cable
is damaged.
Avoid overloading on one electrical outlet as it could generate heat and fire resulting
from overload.
Connect the grounding conductor to the earth terminal (GND):
WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet
does not sit on the power cord as this could damage the cord and become hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the
cord.
To prevent electric shock, do not touch the power plug if your hand is wet.
Ensure the power cord is not located where it can be stepped on or tripped over.
Power plug
Power outlet
Power socket
Power plug
Power cord

Lane Master Manual
14
5. HOW TO PLAY
5.1 Insert coins/swipe to start..
5.2 For competition, insert coin/swipe card to active each lane.
5.3 Roll the ball down the lane to hit the pins.
5.4 Hit the Turkey to win the MEGA BONUS!
5.5 Game scene

Lane Master Manual
15
6. GAME OPTION
6.1 Adjustment button instruction
6.2 Setting menu
6.2.1 Main menu
Basic Setting
Customized Setting
Input Test
Output Test
Game Reset
Date/Time Setting
Language/语言
About This Game
Bookkeeping
DailyRecord
Back to game
6.2.3 Customized Setting
Regulation Mode OFF/ON
Link Mode OFF/ON
Alternating Ball Color OFF/ON
Number of Games Frame 1- 10
Pin(s) Hit Per Ticket 1-999
Multiplayer Join Time 5-10-15-20
Number Of Strike(s) To Enter the Mega Bonus
1-3
Mega Bonus Game OFF/ON
Mega Pins Set 10~100
Each Mega Pin Score 1-10
Go Back&Save
Back
Free Play OFF/ON
Tickets Out OFF/ON
Demo Music OFF/ON
Memory Save OFF/ON
Volume 1-10
Coins Per Game 1-10
Go Back & Save 
Back 
6.2.2 Basic Setting
Open the coin door and there is a
meter panel. Press test button to get
into the setting menu.
Settin
g
s
Test Reset

Lane Master Manual
16
6.2.4Input Test
1P Coin OFF/ON
2P Coin OFF/ON
Service Button OFF/ON
Reset Button OFF/ON
1P Lane Sensor OFF/ON
1P Ball Detect OFF/ON
1P Ball Signal OFF/ON
1P Ball Location 0/100
1P Ball Speed 0/100
1P Ball Direction 0/180
Detection Time for 1P Ball to Pass Sensor1
0
Detection Time for 1P Ball to Pass Sensor2
0
Detection Time for 1P Ball to Pass Sensor3
0
Detection Time for 1P Ball to Pass Sensor4
0
Detection Time for 1P Ball to Pass Sensor5
0
1P Infrared1 OFF/ON
1P Infrared2 OFF/ON
1P Infrared3 OFF/ON
1P Infrared4 OFF/ON
1P Infrared5 OFF/ON
2P Lane Sensor OFF/ON
2P Ball Detect OFF/ON
2P Ball Signal OFF/ON
2P Ball Location 0-100
2P Ball Speed 0-100
2P Ball Direction 0-180
Detection Time for 2P Ball to Pass Sensor1
0
Detection Time for 2P Ball to Pass Sensor2
0
Detection Time for 2P Ball to Pass Sensor3
0
Detection Time for 2P Ball to Pass Sensor4
0
Detection Time for 2P Ball to Pass Sensor5
0
6.2.5 Output Test
2P Infrared1 OFF/ON
2P Infrared2 OFF/ON
2P Infrared3 OFF/ON
2P Infrared4 OFF/ON
2P Infrared5 OFF/ON
1P Ticket Error OFF/ON
2P Ticket Error OFF/ON
1P Send Ball Error OFF/ON
2P Send Ball Error OFF/ON
Back 

Lane Master Manual
17
6.2.9 Bookkeepin
g
6.2.8 About This Game
1P Send Ticket
2P Send Ticket
1P Send Ball
2P Send Ball
Track Random Light
Track Red Light
Track Yellow Light
Track Blue Light
Back
Factory Restore YES/NO
Reset Basic Setting YES/NO
Reset Customized Setting
YES/NO
Clear All Records YES/NO
Clear Owed Ticket YES/NO
Clear Unused Coin YES/NO
Back
Year 2010-2100
Month 1-12
Day 1-31
Hour(24) 0-23
Minute 0-59
Second 0-59
Go Back & Save 
Back 
CPU
Motherboard
Disk Drive
Memory
Display Adapter
Monitor
Screen
Version
Press the Test Button to Go Back
6.2.6 Game Reset
6.2.7 Date/Time Setting
Date Weekday RunTime CoinsTicketsPayout
2014-06-061 Fri 00:01 0 0 0.00
Prev. Page
Next Page
Clear
Back
6.2.5 Out
p
ut Test
Player1 Coins TicketsPayout
1 0 0 0.00
Back
6.2.10 Daily Record

Lane Master Manual
18
6.3 Display Advertisement Operation
In Version 1.05 for Lane Master, operator can put advertisement to the machine and
display on the top monitor.
Please note that the advertisement video format has to be AVI.
Please prepare a mouse, a keyboard and a memory stick.
Step 1
Power down the machine. Plug in a mouse and a keyboard. Power up the machine. Insert a
memory stick after pc showing system interface.
Note: Please do not put any ghost system file to the memory stick and do not insert the
memory stick before power up the machine. Which may cause to damage the system.
Put the video file to a certain file.
Step 2
Copy the AVI file from memory stick into “Videos” folder.
(“Start” →”Computer” →” GameDGho”
→”Videos” )
Step 3
Unplug the memory stick. Power off and on the machine. The advertisement video will be
shown on the top screen. If the video format is not AVI. It will shown an error as below.

Lane Master Manual
19
7. TROUBLE SHOOTINGS
7.1 Common Problem
Please confirm whether every connector connected tightly.
Symptom Possible Cause Recommended action
Game will not
start
Frame assembly connector is
loose. Plug the connector tightly.
Frame assembly fault Contact with UNIS Service.
Power cutting Circuit protector make power SW
in cutting state
Turn on power SW again. If appeared
again and again, machine has
anomaly. Please contact with UNIS
Service.
Game will not
coin up
Coin mech. fault or sample coin
not installed. Change coin mech. or sample coin.
Coin mech. signal cable loose. Check coin mech. signal cable loose.
IO control board no signal. Change IO board.
No ticket
dispensing
Out of ticket. Add ticket and press reset button
Ticket jamming. Remove the jammed tickets and press
reset button.
Wrong connection. Check the connections.
No sound
Volume set too low. Raise the volume.
Connector loose. Plug in connector tightly.
PCB fault. Change PCB.
Speaker fault. Change speaker.
POT installation error. Install POT correctly.
POT fault. Change POT.
Audio cable problem. Reconnect the audio cable or change
it.
PC crash. Restart or system recovery.
Driver problem Restart the audio driver.
Display black
screen
Check connectors. Plug in connector tightly
Display fault. Vitalize another source such as a PC to
verity if the display is operational.
RAM is loose. Pull it out and insert it again or change
main board or RAM.
Display blue
screen
PC power cord is loose Check PC power cord whether is loose.
VGA signal cable is loose. Check VGA cable
PC video card is loose. Reseat video card.
PC into protection
Open front cover, if power on, light
flash all the time. Press power button
30s, then restart.
“0X000000A” code appears.
Conflict between computer drive
and software.
Uninstall or disable the new drivers or
software.