Universal Space Pin Setter User manual

www.universal-space.com
Operation Manual
IMPORTANT

Pin Setter Manual
04/18/2018
1
WE ARE HERE TO ASSIST
For parts and service
Have Questions? Contact us!
UNIS SERVICE CENTER
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Pin Setter Manual
04/18/2018
2
CONTENT
IMPORTANT SAFETY INSTRUCTIONS........................................................................ 3
1. SPECIFICATIONS ..................................................................................................... 5
2. CONTENTS OF THE ACCESSORY KIT .................................................................... 6
3. PART NAME.............................................................................................................. 7
4. SET UP & INSTALLATION........................................................................................ 8
5. HOW TO PLAY ........................................................................................................12
6. GAME OPTION .......................................................................................................13
7. TROUBLE SHOOTINGS ..........................................................................................16
8. MAINTENANCE & INSPECTION ...........................................................................19
9. OVERALL CONSTRUCTION ...................................................................................27
10. WIRING DIAGRAM ..............................................................................................59

Pin Setter Manual
04/18/2018
3
Thank you for purchasing Pin Setter. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Pin Setter Manual
04/18/2018
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Pin Setter Manual
04/18/2018
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz;
Min. Power consumption: 390W
Max. Power consumption: 470W
Dimension: W80.53×D34.17×H110.08 in
W2045×D868×H2796 mm
Weight：Approximately 1212.5 lb
550kg
Part No: P139
Model No: C-522
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.

Pin Setter Manual
04/18/2018
6
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
1. Following accessories
NOTE: Part models are subject to change without notice.
No. Part No. Name Picture Qty
1 P139-801-000 Key 2
2 P139-802-000 Key 2
3 P139-803-000 Fuse 2
4 P139-804-000 Power cord 2
5 P139-805-000 Manual 1
6 P139-134-000 Rod 2
7 P139-463-000 String
3
8 P139-148-000 Bowling pin bottom
assy.(normal)
2
9 P139-152-000 Pin bottom
assy.(bronze)
2
10 P139-154-000 Pin bottom
assy.(aluminum) 2
11 P139-467-000 Nylon wiring
2

Pin Setter Manual
04/18/2018
7
3. PART NAME
Key Components
Coin mech.
Mar
q
uee Ass
y
.
Ticket dispenser Assy.
MEGA
BONUS
27" Monitor
Bowling pin
Display
Rod assy.
Start button
Rod handle
Ring assy.

Pin Setter Manual
04/18/2018
8
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game. If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off
the ground by 0.2 in. Repeat the same for all levelers.
Leveler Caster
Move F
i
Caster Leveler
About 0.2 in
Move Fix
NOTICE
Make sure the machine is level.
We do not recommend using power tools as they may cause damage.
NOTICE

Pin Setter Manual
04/18/2018
9
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 20 in
Play area
Your unit must be leveled to operate properly.
NOTICE
Service area

Pin Setter Manual
04/18/2018
10
4.4 Marquee Installation (This process requires assistance.)
Before processing with assembly assure you have the following tools.
No.
Name Picture
1 Phillips screwdriver
2 Ladder
Step 1 Stand on the ladder and place the marquee bracket on the top of the cabinet and fix it
with four screws as picture shown.
2 screws one side
Step 2 Place the MEGA BONUS marquee assy. on bracket and fix it with two screws as picture
shown. Please connect the plugs.
Step 3 Place the LOGO marquee assy. on the bracket and fix it with four screws as picture
shown. Please connect the plug.

Pin Setter Manual
04/18/2018
11
Step 4 Place the L&R stripe assy. on the bracket and fix it with six screws as picture shown.
Please connect the plugs.
3 screws for one side

Pin Setter Manual
04/18/2018
12
5. HOW TO PLAY
5.1 Insert coins.
5.2 Press the start button to begin
5.3 Use the Rod make the Pin stand up within game time. Less time you spend, more
tickets you will get.
Rod assy.
Start button
Rod handle
Ring assy.

Pin Setter Manual
04/18/2018
13
6. GAME OPTION
6.1 Adjustment button instruction
6.2 Setting menu
6.2.1 Main menu
Basic Setting
Customized Setting
Input Test
Output Test
Game Reset
Date/Time Setting
Language/语言
Bookkeeping
Daily Record
Sensor Frame Detection
About this game
Back to game
Open the coin door and there is a
meter panel. Press Settings button to
enter into the setting menu.
Settin
g
s Test Reset
6.2.2 Basic Setting
6.2.3 Customized Setting
Divided by 2 OFF/ON
Fixed ticket mode OFF/ON
Fixed ticket 0-300
Second try OFF/ON
Mega bonus mode OFF/ON
Mega Bonus 300-9999
Level 1 tickets 300-9999
Mega Bonus time (s)
Level 1 time (s)
Mercy tickets 0-10
Dispensing type Ticket/Coupon
Speed Level Fast/Medium/Slow
Free Play OFF/ON
Tickets Out OFF/ON
Out of Tickets Store in memory/Call Attendant
Demo Music OFF/ON
Memory Save OFF/ON
Volume
PayOut ON/OFF
Payout ticket per coin
Game Time 30/45/60/75/100/120/160
Coins Per Game 1-5
Pay Mode Insert Coins/Swipe Card
Back&Save
Back
Back&Save
Back

Pin Setter Manual
04/18/2018
14
6.2.4Input Test
6.2.8 About This Game
CPU
Motherboard
Disk Drive
Memory
Display Adapter
Monitor
Screen
Version
Press the Test Button to Go Back
Ticket driver
Card reader inhibit
Card reader enable
Two side light bar
Go button light
Turntable light
Bonus light
Mega Bonus light
String mechanism
Pushing rod mechanism
Turntable
Mega Bonus light
Insert coin OFF/ON
Front window OFF/ON
Go button OFF/ON
Rod laying down OFF/ON
Rod pulling up OFF/ON
Pushing rod push over
OFF/ON
Pushing rod stand OFF/ON
Back
Factory Restore YES/NO
Reset Basic Settings YES/NO
Reset Customized Settings YES/NO
Clear All Records YES/NO
Clear Owed Tickets YES/NO
Clear Unused Coin YES/NO
Back 
6.2.5 Output Test
6.2.6 Game Reset 6.2.7 Date/Time Setting
Year 2010-2100
Month 1-12
Day 1-31
Hour(24) 0-23
Minute 0-59
Second 0-59
Go Back & Save 
Back 
Player Coins TicketsPayout
1 0 0 0.00
Back
6.2.9 Bookkeeping

Pin Setter Manual
04/18/2018
15
6.2.10 Daily Record
6.2.11 Calibrate the detecting area
Date Weekday RunTime CoinsTicketsPayout
2014-06-061 Fri 00:01 0 0 0.00
Prev. Page
Next Page
Clear
Back
Pin is set: No
Detecting time:1.5
Operation tips
Calibration: Reset button
Back: Settings button

Pin Setter Manual
04/18/2018
16
7. TROUBLESHOOTING
7.1 Common Problem
Please confirm that all connectors fit tightly.
Symptom Possible Cause Recommended action
Game will not
start
Frame assembly connector is
loose. Check connector.
Frame assembly fault Contact with UNIS Service.
Power off Circuit protector make power SW
in off state.
Turn on power SW again. If appeared
again and again, machine has
anomaly. Please contact with UNIS
Service.
Card reader not
working
The connector is loose. Check connector.
Card reader fault. Check with card reader manufacturer.
No ticket
dispensing
Out of ticket. Add ticket and press reset button
Ticket jamming. Remove the jammed tickets and press
reset button.
The connector is loose. Plug the connector tightly.
No sound
Low volume Raise the volume.
Connector loose. Check connector.
Speaker fault. Check speaker.
POT installation error. Install POT correctly.
POT fault. Change POT.
Audio cable problem. Reconnect the audio cable or change
it.
PC crash. Restart or system recovery.
Driver problem Restart the audio driver.
Display black
screen
Check connectors. Plug in connector tightly
Display fault. Utilize another source such as a PC to
verity if the display is operational.
RAM is loose. Remove and reinsert RAM.
Display blue
screen
PC power cord is loose Check PC power cord whether is loose.
VGA signal cable is loose. Check VGA cable
PC video card is loose. Reseat video card.
“0X000000A” code appears.
Conflict between computer drive
and software.
Contact service

Pin Setter Manual
04/18/2018
17
If you see following error signs showing on the display, please try the recommended action.
Display Possible Cause Recommended action
The connection part of the
IO board and PC are loose.
Check and reconnect the
loose ports of the PC or IO
board.
USB cable quality problem
Change the USB cable after
checking the connection
between IO board and PC.
USB cable became loose
during transportation.
Check and reconnect the
loose cables of the PC or IO
board.
IO board is faulty.
Reboot the game after
checking USB connection and
USB cable problem, if the
problem remains unresolved,
please call the service
department for assistance.
Out of ticket. Refill ticket
Loose connection of the
ticket dispenser’s cables.
Check and reconnect the
loose cables to the ticket
dispenser.
Ticket dispenser is faulty. Change the ticket dispenser.
Ticket jam. Remove jammed tickets.

Pin Setter Manual
04/18/2018
18
7.2 System Recovery Operation (NOTE: Do not disconnect power during this process.)
1. Turn off the game. Remove recovery USB from the machine. (Note: This process may
take up to 60 minutes) Insert the memory stick into the USB port at the back of the
computer.
2. Restart PC to enter the system recovery screen as shown.
3. The game will automatically start recovery.
4. Once system recovery is partially finished (as shown below), and the ICON appears,
remove the USB flash drive from the computer. The game will continue the install process.
5. Assure that the recovery USB has been properly secured for future use.
WARNING: the USB flash drive should only be used to fix software errors. Using it for
other purposes may cause unexpected results and damages.

Pin Setter Manual
04/18/2018
19
8. MAINTENANCE & INSPECTION
8.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Test game before operation each day.
2. Conduct monthly routine checks of game components to ensure good working
condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to maintain proper
operation.
8.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and
pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the
cautionary matters herein stated can cause personal injury or damage to the machine
8.3 Parts replacement
Before processing with assembly assure you have the following tools.
No. Name Picture
Use for
1 Phillips screwdriver
8.3.1 Changing the pushing
rod nylon wiring.
& 8.3.3 Changing the Bowling
pin bottom ass
y
.
2 Wrench
8.3.2 Changing the turntable
assy.
3 L type wrench
8.3.3 Changing the Bowling
pin bottom assy.
& 8.3.5 Changing the rod assy.
4 Circlip pliers 
8.3.3 Changing the Bowling
pin bottom assy.
We do not recommend using power tools as they may cause damage.
NOTICE