V-TAC VT-1140 User manual

In case of any query/issue with the product, please reach out to us at: [e-mail]
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INSTRUCTION MANUAL
SOLAR LED WALL LIGHT
WITH SENSOR
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-1140
SKU 23014
LUMENS 70 Lm
SOLAR PANEL DC 5.5V, 0.55W Polycrystalline
BATTERY 1200mAh, Li-Ion, DC: 3.7V
CHARGING TIME 8-10 Hours
WORKING TIME 6-8 Hours
SENSOR TYPE Microwave Sensor 360°
SENSOR RANGE 3-4 M
BULB WATTS 1 W
COLOR TEMPERATURE 3000K
DIMENSION 121x90x121.5mm
MATERIAL Aluminium+PC

This marking indicates that this
product should not be disposed of
with other household wastes.
WARNING
INSTALLATION DIAGRAM
1. Please make sure to turn o the power
before starting the installation.
2. Installation should be done by certified
electrician.
1 2 3
4 5 6

INSTALLATION INSTRUCTION
FUNCTION OF SENSOR
1. Drill two holes on the wall and insert two plastic expansion bolts in it.
2. Fix the iron bracket on the plastic expansion piece with self-tapping screws.
3. Open the lamp and turn on the switch.
4. Tighten the lamp and test
1. Press the switch(turn on)
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turn o
MAINTENANCE & WARNING
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top).
• Confirm no objects blocking the solar panel to receive sunlight.
• Keep away from the fire.
• Don’t immerse in the water.