Vivo MOUNT-VW100T User manual

Flat Panel TV Wall Mount Bracket
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw100t
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: MOUNT-VW100T

2
TOOLS NEEDED
165lbs
(75kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 1-800-371-5654.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Remove nuts from brackets (B) and (C) and replace with knobs (D).
D

4
STEP 2
OPTION A: Wood Wall
Use template (E) to mark mounting holes on wall where studs are located. Using a 3/16” bit, drill
approximately 2.2” into wall. Use bolts (W-A) and washers (W-C) to secure mount (A) to the wall.
OPTION B: Concrete/Brick Wall
Use template (E) to mark mounting holes on wall. Using a 3/8” bit, drill approximately 2.4” into wall.
Insert anchors (W-B) into holes and secure mount (A) to wall using bolts (W-A) and washers (W-C).
F
X
W- A
W- C
F
W- B W- A
W- C

5
STEP 3
Mount brackets (B) and (C) to back on TV using bolts (M-A, M-B, M-C) and metal spacer (M-F). Makes
sure straps are towards the bottom of television.
If bolts (M-A, M-B, M-C) are too long, spacers (M-G, M-H) may be required.
M- A/M-B
M- F
M- F
M-C/M- D
M- G
M- F
M-C/M- D
M- H
M- F
M- G
M- H
M-C/M- D
M- F
M- G
M- H
M- E
M- F
M- G
M- H
M- E
M- F
M- E
M- H

6
STEP 4
Attach TV to mount (A) as shown in diagram. Make sure bottom of brackets (B) and (C) are attached
securely.
+5 °
-10°

7
STEP 5
To remove, pull both straps down and li television o of mount (A).

Last Updated: 05/06/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654