Westomatic EVOLVE User manual

FITTING PLINTHS

FITTING PLINTHS
Equipment Needed:
8mm Hex Socket Wrench
Phillips screwdriver

P L I N T H S
I N S I D E T H E M A C H I N E

Plinths will have
bolts fitted
The bolts must be located
closer to the bottom
when fitting
The bolts fit
into a keyhole
connection with
the front plinth
1 - U N P A C K P L I N T H S

2 - F I T S I D E P L I N T H S
Remove screws
Slide plinth into back
of machine first
Fit plinth to front
Replace screws
Repeat steps on other side

3 - F I T F R O N T P L I N T H
Remove countersink
screws x2
Ensure plinth and
countersink align
Replace screws x2
Plinths fitted on both
sides and front

W e s t o m a t i c V e n d i n g
S e r v i c e s L t d ,
U n i t s 7 - 8 F o r d e C o u r t ,
B l o c k 4 F o r d e R o a d ,
N e w t o n A b b o t ,
T Q 1 2 4 B T
+ 4 4 ( 0 ) 1 6 2 6 3 2 3 1 0 0
s a l e s @ w e s t o m a t i c . c o m
w w w . w e s t o m a t i c . c o m
C O N T A C T
RECOVER. REPEAT.