Wren Kitchens Diag Corner Larder User manual

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.indd
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
98 ¼” x 24”
2 Door
70/30 Door
84” x 24”
86 ¼” x 24”
92 ¼” x 24”

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.inddPage 1
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
(J) L Bracket SML
x6
(K) L Bracket LGE
x4 (B) x142
”
Screw
(H) x6
1 ”
Screw

x4 (O) Metal Shelf Peg
x56
Toe Kick Attachment
BEFORE YOU START
INSTALLATION
SHOULD BE
PERFORMED BY A
COMPETENT
PERSON ONLY.
THIS PRODUCT COULD
BE DANGEROUS
IF INCORRECTLY
INSTALLED
Carcase RH
Right Hand
Carcase LH
Left Hand
Panel (Z)
x1 Top Panel Frontals
2Dr or 70/30
Frontal
Toe Kick
x2
Cabinet
Toe Kick
x1
Hinge Mounting Plate
Inc Screws
Hinge
Inc Screws
Fixing Plate (Ff)
x19
REQUIRED TOOLS
NOT to be used
with CAM DOWEL
& CAM LOCK
70/30
OPTION
2Dr
OPTION
(Packed Seperately)
Legs
x10

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.indd Page 2
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
RH
Fixing Plate diagram
View from Above


OUTSIDE
FACE
Z
Front
Step 1.
Lay both carcases LH & RH fiat as shown.
Secure 5 x ‹xing plates (Ff) positioned onto
outside face of panel (Y)of carcase RH equally
spaced using 2 x ” screws (B) as shown.
Step 2.
Using 2 x ” screws (B) per plate secure
2 x ‹xing plates (Ff) positioned onto
outside face of panel (Z) of carcase RH
using measurements shown.
B
B
B
B
Ff
View from above
Carcase RH
View from above
Carcase RH
Z
Y
Z
RH
LH Y
Ff
Z
Ff

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.inddPage 3
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
Step 3.
Secure leg base into place with
2 x ” screws (B) per leg as shown.
Ensure legs are rotated to also provide
support to the end panels (Y).  
Front legs should have fiat edge to the
front.
B
Step 5.
Push leg ‹rmly down  into leg base.
Adjust legs to 4 ” before turning both carcases upright.
Once in situ level accordingly.   
It is important to lift cabinet onto its legs. 
Do not tilt as depicted in image.
X
YY
Front
RH X
FrontFrontFront
LH X
Leg position diagram
View From Underside
Y
B
Step 4.
Lightly hit centre peg of leg
bases with hammer  until fiush.  
X
Y
X
Y

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.indd Page 4
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
Step 6.
Position carcase LH and carcase RH together as shown.
Ensure carcases are fiush & square.
View from rear of cabinet
Step 8.
Align 2 x L bracket SML (J) combined with
2 x ” screws (B) per bracket as shown.
Secure carcase from inside the cabinet as shown.
Step 7.
Screw through ‹xing plates (Ff)
into adjoining carcase LH using
2 x ” screws (B) per plate to
secure both carcases together.
Repeat per ‹xing plate(Ff).
Ff
Ff
Ff
Ff
Ff
Ff
Ff
LH
RH
Front
Front
Front
LH
RH
LH
RH
BB
BB
BB
Ff
Ff
Ff
Ff
Ff
LB
B
J

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.inddPage 5
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
Step 9.
Use 2 x ” screws (B) to secure each of the
4 x L brackets LGE (K) to both carcases positioned as shown.
B
B
Step 10.
Screw through into the  wall as shown.



K
Fixings
to Wall
Front Front

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.indd Page 6
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
Step 11.
When cabinet is combined and secured in position, attach top Panel (Z),
using 4 x ‹xing plates (Ff) combined with 4 x ” screws (B) per plate,
positioned as shown.
Step 12.
Measure toe kick and cut to suit the width of carcase (LH) and again for (RH).
Mark clip positions by aligning toe kick sections to legs. Use 2 x ” screws (B) as shown to ‹x clip to toe kick. 
Detach the leg clip from the toe kick clip. Slide leg clip into toe kick clip as shown.
Top Panel Z
Ff & B
Ff & BFf & B
Ff & B
Toe Kick
Toe Kick
Leg
Brace
BB
Step 13.
Secure toe kick by pushing clip ‹rmly onto legs as shown.
Toe Kick
Toe Kick
LH RH
INSIDE
FACE

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.inddPage 7
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
84”
70/30
HINGE
POSITION
70/30 2 Dr
Door
From Top
84”
2 Door
HINGE
POSITION
76 ½” 76 ½”
26 ”
34 ”
55 ”
45 ¾”
4 ¼”
75 ¼” 75 ¼”
25 ”
32 ”
54”
44 ½”
3”
Step 14.
Attach hinge plates onto end panels (Y)to suit as
shown using 2 x ” screws (B) included per plate.
Hinge side to be mounted in accordance to

Front Front
4 ¼”
3”
35”
33 ¾”
YY
INSIDE
FACE

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.indd Page 8
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
86 ¼”
70/30
HINGE
POSITION
86 ¼”
70/30
HINGE
POSITION
70/30
YY
78 ¾” 78 ¾”
46 ¾”
36 ”
32 ”
55 ”
26 ”
77 ½” 77 ½”
45 ½”
34 ”
34 ”
56 ”
25 ”
From Bottom
Front Front
Step 14.
Attach hinge plates onto end panels (Y)to suit as
shown using 2 x ” screws (B) included per plate.
Hinge side to be mounted in accordance to

From Bottom
2 Dr
Door
4 ¼” 4 ¼”
3” 3”
INSIDE
FACE
INSIDE
FACE

For Internal Use:CON.INS.004.001_50-WKIN00007_TOWER45WineRack_Assembly_Rev5.inddPage 9
TOWER CABINET
84”, 86 ¼”, 92 ¼” & 98 ¼”
Diag Corner Larder
with Wine Rack Cabinet
Assembly
Guide
Step 14.
Attach hinge plates onto end panels (Y)to suit as
shown using 2 x ” screws (B) included per plate.
Hinge side to be mounted in accordance to
 YY
92 ¼”
70/30
HINGE
POSITION
70/30 2 Dr
Door
From Top
92 ¼”
2 Door
HINGE
POSITION
84 ” 84 ”
26 ”
34 ”
59 ”
49 ¾”
4 ¼” 4 ¼”
83 ” 83 ”
25 ”
32 ”
58 ”
48½”
3” 3”
Front Front
39 ”
37 ”
INSIDE
FACE