Wren Kitchens VOID CORNER POST Assembly instructions

For Internal Use:FI.PK.FIT.010_50-WKIN00005_Void_Cnr_Post_Rev4.inddPage 1
FITTING GUIDE
VOID CORNER POST
Panel A Packer C/D (3 ”)
C
C
D
D
A
B
Step 1.
Place the Packer (C) ush with the front edge of the cabinet. Screw into any side cabinets using
the 1 ” screws (I) provided to secure the cabinet. Screw just to the rear of the hinge mounting
plate, at the top and the bottom of both sides of the cabinet.
Conceal screw head under hinge bracket where possible.
Repeat this step on the adjoining cabinet with packer (D), making sure to place the panel on
the correct side as shown above.
Align
Align
Sample cabinet shown
(I) x8 1 ” Screws (H) x6 1 ” Screws
Panel B
FI.PK.FIT.010 - VOID CORNER POST
I
I
I
I

For Internal Use:FI.PK.FIT.010_50-WKIN00005_Void_Cnr_Post_Rev4.indd Page 2
FITTING GUIDE
VOID CORNER POST
XY
Step 2.
Cut panel (B) to size according to Kitchen Plan.
Step 4.
Place your assembled corner post into
position then screw through packers using
3 x 1 ¼” (H) screws into each panel.
Note: To adjust cabinets in (X) plane simply move
panel (A) accordingly. To adjust in (Y) plane, you must
cut panel (B) and the packer (C) accordingly.
B
C
A
B
C
D
A
D
H
H
H
I
I
I
Step 3.
To create your corner post attach panel (A) and panel (B) as shown.
Screw through panel (A) into panel (B ) at 4 locations using 4 x 1 ” (H)
screws.
Corner post size can be adjusted by positioning panel (B) along panel (A).
H
H
H
H
B
A
REQUIRED TOOLS
Sample cabinet shown