Installing XRay Vision Remote
Viewer
AfteryouhaveinstalledtheXRayVision
server,you can usethe XRayVision
remoteviewerlookatyourimagesfrom
anyPCconnected tothe Internet. The remote
viewerisautomaticallyinstalled withthe server.
You can send the installerapplicationstofamily
and friendsfortheiruseininstalling the remote
viewer.
Formorehelp,see:
http://www.x10.com/support
Installation Notes:
Important! Useofthe Video toUSB Converter
requiresWindows95 OSR2.1withUSB supportor
Windows98/XP/2000.Donotplug inthe Video
Converteruntil the X10 softwareisinstalled.
Installing theXRay Vision Software
Beforeyou connectthe Video toUSB
Converter(modelVA10A)you mustfirst
install the driversand XRayVision
Software.Download the softwareusing
the linkinthe e-mail you received.
Next, run the installation application.Selectthe
directorywhereXRayVision will be installed and
decide howyou wantXRayVision listed on your
WindowsStartmenu.Afterthat, the XRayVision
installation programwill automaticallyfinish.You
arenowreadytosetup the Video toUSB Adapter.
Connecting theUSBVideoCapture
Adapter
When the installation
programinstructsyou to,
plug the Video toUSB
ConverterconnectorintoaUSB port
on yourcomputer.Thecomputerwill
recognizethatnewhardwarehas
been installed and completethe
installation.
Connecting theVideoReceivertothe
VideoCaptureAdapter
1.Plug the yellowvideo
plug on the supplied cable
intothe Video Outjack on the
VR30A.
2.Connecttheotherendofthecable
tothe yellowVideo Injack on the
Video CaptureAdapter.
3.Plug the PR30Apowersupply
intoany120VACoutlet.
4.Plug the poweroutputofthe
PR30Aintothe DC 12Vplug on the
VR30A.
5.Makesurethe switchon the
underside ofthe VR30Aissettothe
sameletterasthaton the VT30A
video transmitter.
Streaming XRay Vision Upgrade
MODEL
NUMBER:
IN42A
©Copyright2000 X10 Wireless Technology,Inc.
