XMark Fitness XM-4467.1 User manual

Owner’s Manual
Read all precautions and
instructions in this manual before
using this equipment.
Dumbbell and Plate
Rack with Bar Storage
XM-4467.1

2
Table of Contents
3
4
5-6
7
Before You Begin
Important Safety Information
Assembly
Exploded View/Parts List

Before You Start
3
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, please contact our
Customer Service department. We have trained service technicians on site to
assist you.
MODEL: XM-4467.1
XM-4467.1
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
XMARK FITNESS SERIES
Visit www.xmarkfitness.com for warranty information

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
•This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
•Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
•Always examine your unit before using to ensure all parts are in working order.
•Do not leave children unsupervised near or on the unit.
Important Safety Information
4

1
1.
2
3
2.
3.
Attach the Crossbar (8) to the Base (3) and Left
Upright (2) with two M10 x 73mm Bolts (10), two
M10 Locknuts(11).Do not tighten the Bolts yet.
Attach the Crossbar (8) to the Base (3) and the
Right Upright (1) in the same way.
Assembly
5
and eight M10 Locknuts (11).
Attach the Angle Iron Shelving (4) to the Left
Upright (2) and the Right Upright (1) with eight
M10 x 63mm Bolts (13),eight M10 Washers (12)
9
9
99
8
12
12
14
3
8
10
2
2
1
1
3
11
13
13 13
13
4
4
4
4
12
12
12
12
11
11 11
See step 2. Tighten the M10 Locknuts
(11).
Your rack will accommodate Standard, Olympic,
and Bumper Plates.
Attach the Plate Dividers (9) to the Crossbar (8)
with eight M10 x 30mm Bolts (14), eight M10
Washers (12).
Start all eight Bolts, and then tighten them.
Lower rail goes in the front.
___________
Lower rail goes in the front.
___________

4
4. Attach the Bar Holders (18) to the Bases (3) with
four M10 x 68mm Bolts (15), four M10 Washers (12)
and four M10 Locknuts (11).
Assembly
6
Make sure that all parts are properly tightened
before you use the Dumbbells and Plates !
Congratulations!! You have completed
assembly of your XM-4467.1 !
5.
18
15
15
12
11
3
3
18

Exploded View/Part List
1
2
3
3
4
4
4
4
5
5
6
6
6
6
6
66
6
7
7
7
7
10
10
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12 12
13
13
13
13
13
13
13
13
15
15
16
19
16
19
17
17
18
20
20
18
Key No. Description Qty. Key No. Description Qty.
1 1
10 4
2 1
11 16
3 2
12 20
4 4
13 8
5 2
14 8
6 8
15 4
7 4
16 2
8 1
17 2
9
Right Upright
Left Upright
Base
Angle Iron Shelf
50mm Inner Cap
44mm Inner Cap
Square End Cap
Crossbar
Plate Divider
4
18
M10 x 73mm Bolt
M10 Locknut
M10 Washer
M10 x 63mm Bolt
M10 x 30mm Bolt
M10 x 68mm Bolt
Foot
Base Inner Cap
Bar Holder
2
19
M4 x 19mm Screw
2
20
Bushing
2
7
12 12
12
12 12
8
11
11
12
12
14 14
14
14
14 12
9
9

Customer Service: 1-800-719-4605