XMark Fitness XM-9055 User manual

XM-9055
Olympic Plate Tree

Important Safety Instructions
 3
Instructions  
Parts List
 
Exploded View  
Measurement Guide  7
Assembly Instructions  8
Assembly
 
Please visit xmarkfitness.com for warranty information .
CAUTION!
Read all precautions and instructions in this manual before using this equipment.

─ 3 ─
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise equipment,
basic precautions should always be taken, including the following:
* Read all instructions before using the equipment. These instructions are
written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this
guide. Do not use accessory attachments that are not recommended by
the manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout
immediately and consult your physician.
* Never operate the unit when it has been damaged.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
Personal Safety During Assembly
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later that
you have to disassemble components and that you may have damaged
the equipment.
* Assemble and operate the equipment on a solid, level surface. Locate
the
unit a few feet from furniture to provide easy access. The equipment is
designed for your enjoyment. By following these precautions and using
common sense, you will have many safe and pleasurable hours of healthful
exercise with the equipment.

Instructions
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that all
parts have been included in your shipment. When ordering, use part number
and description from the lists. Use only our replacement part when servicing.
Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly. If
you are unable to correct the problem, call 1-800-719-4605. Be sure to have
your serial number and this manual when calling. When all parts have been
accounted for, continue on.
Tools Required
Ratchet Wrench and Socket
Adjustable Wrench
─ 4 ─

─ 5 ─
Parts List
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
NUMBER DESCRIPTION QUANTITY
1 Beam 1
2 Side Base 2
3 Connect Frame 1
4 Bell Rod 3
5 Short Bell Rod 1
6 Square
Plug 4
7 Round Plug 7
8 Hollow
Sleeve 2
9 Rubber Buffer 7
10 Splint 2
11 Wheel with Lock 2
12 Wheel 2
13 Bolt M10*30 3
14 Bolt M8*16 16
15 Bolt M10*80 6
16 Bolt M10*85 4
17 Spring Washer 8 16
18 Washer 8 16
19 Washer 10 43
20 Lock Nut M 10 10
21 Plate 2

1
23
4
5
6
7
8
9
10
11
12
14
1718
16 19
15
13
20
15
21
7
19

─ 7 ─
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide

─ 8 ─
AAs with any assembled part, proper alignment and adjustment is critical. While 
tightening the fasteners, be sure to leave room for adjustments. Do not fully 
tighten the fasteners until instructed to do so. Be careful to assemble the 
components in the sequence presented in this guide.
Assembly Instructions
Assembly of the equipment takes professional installers about 1 hour. If this is
the first time you have assembled this type of equipment, plan to spend more
time. It is strongly recommended to assemble the equipment by professional
installers. You may find it quicker, safer, easier to assemble this equipment with
the help of a friend, as some of components may be large, heavy or awkward to
handle alone. It is important that you assemble your product in a clean, clear,
uncluttered area. This will reduce the possibility of injury during assembly.

1
3
2
21
16 10
19
12
11
14
17
18 15
15
19 20
Attach wheels with locks (11#) and wheel (12#) to side bases (2#) using:
- sixteen M8*16 HHB (14#)
- sixteen 8# spring washers (17#)
- sixteen 8# washers (18#)
Attach connect frame (3#) to side bases (2#) using:
- four M10*85 HHB (16#)
- eight 10# washers (19#)
- four M10 lock nuts (20#)
- two splints (10#)
Attach beam (1#) to connect frame (3#) using:
- six M10*80 HHB (15#)
- twelve 10# washers (19#)
- six M10 lock nuts (20#)
- two plates (21#)

4
22
9
13
5
19
1
Attach tree bell rods (4#) and six rubber buffers (9#) to beam (1#) using:
- tree M10*30 HHB (13#)
- tree 10# washers (19#)

Customer Service: 1-800-719-4605