XMark Fitness XM-9023 User manual

XM-9023

─ 3 ─
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise equipment,
basic precautions should always be taken, including the following:
* Read all instructions before using the equipment. These instructions are
written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this
guide. Do not use accessory attachments that are not recommended by
the manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout----no loose
clothing.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
* Never operate the unit when it has been dropped or damaged.
* Never drop or insert anything into any opening in the equipment.
* Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
* Frayed or worn cables can be dangerous and may cause injury.
Periodically check these cables for any indication of wear.
* Keep hands, limbs, loose clothing and long hair well out of the way of
moving parts.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
Personal Safety During Assembly
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later that
you have to disassemble components and that you may have damaged
the equipment.
* Assemble and operate the equipment on a solid, level surface. Locate the
unit a few feet from walls or furniture to provide easy access. The
equipment is designed for your enjoyment. By following these precautions
and using common sense, you will have many safe and pleasurable hours
of healthful exercise with the equipment.

Instructions
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that all
parts have been included in your shipment. When ordering, use part number
and description from the lists. Use only our replacement part when servicing.
Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly. If
you are unable to correct the problem, call your authorized dealer. Be sure to
have your serial number and this manual when calling. When all parts have
been accounted for, continue on.
Tools Required
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
─ 4 ─

Foam Cap
─ 5 ─
Parts List
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
Item No. Description Qty Item No. Description Qty
1 Main Frame 1
22 Plug □40*80 2
2U Front Base 1
23 Ball Head for Pin 1
3 Rear Base 1
24 Spring 1
4 Seat Pad Support Frame 1
25 Wheel 2
5 Back Pad Support Frame 1
26 Knob 1
6 Adjustable Back Pad Frame 1
27 Plastic Sleeve 50.8*44.5 1
7 Plastic Sleeve 1
28 Plug □50.8*76.2 1
8 Back Pad 1
29 Leg Support 1
9 Seat Pad 1
30 Plug □50.8 2
10 Pin 1
31 Roller Pad Tube 1
11 Iron Bushing 6
32 Upholstered Roller Pad 2
12 Button Head Cap Screw M12*125 4
33 2
13 Flat Was 17
34 L Pin 1
14 Nylon Lock Nut M12 9
35 1
15 Button Head Cap Screw M12*75 2
37 Nylon Lock Nut M8 2
16 Foot Cap 1 □50.8*76.2 2
38 Button Head Cap Screw M8*45 2
17 Button Head Cap Screw M10*70 6
39 Foot Cap 2 □50.8 2
18 Flat Was 6
40 Foot Cap 2 □50.8*76.2 2
19 Button Head Cap Screw M12*80 2
42 Button Head Cap Screw M8*25 12
20 Foot Cap 1 □50.8 2
43 Flat Was
21 Grip 1
4
44
46
45
Wrench 17-19
Hex Key S=8
Hex Key S=6 1
1
1
Plastic Buffer Plate
41
47
Hexagon Head Screw M8*25 2
48 2
Self-Plugging Rivet
Hex Key S=5 1
her Φ13*Φ26*2
herΦ23*Φ11*2 her Φ9*Φ16*1.6

41
41

─ 7 ─
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
FHCS = Flat Head Cap Screw
HHB = Hex Head Bolt
Measurement Guide

─ 8 ─
Assembly of the equipment takes professional installers about 2 hours. If this is
the first time you have assembled this type of equipment, plan to spend more
time. It is strongly recommended to assemble the equipment by professional
installers. You may find it quicker, safer, easier to assemble this equipment with
the help of a friend, as some of components may be large, heavy or awkward to
handle alone. It is important that you assemble your product in a clean, clear,
uncluttered area. This will enable you to move around the product while you are
fitting components and reduce the possibility of injury during assembly.
A
As with any assembled part, proper alignment and adjustment is critical. While

tightening the fasteners, be sure to leave room for adjustments. Do not fully

tighten the fasteners until instructed to do so. Be careful to assemble the

components in the sequence presented in this guide.
Assembly Instructions

─ 11 ─
Assembly
Step 5
1. Attach the Back Pad (8#) to Back Pad Support Frame (5#) using:
four M10*70 BHCS (17#) four Φ23*Φ11*2 Flat Washer (18#)
2. Attach the Back Pad Support Frame (5#) to Main Frame (1#) using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
Note: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 6
1. Attach the Adjustable Back Pad Frame (6#) to Back Pad Support Frame (5#)
using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
2. Attach the Plastic Sleeve (7#) to Adjustable Back Pad Frame (6#) using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
Note: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 7
1. Attach the Roller Pad Tube (31#) into Leg Support (29#).
Place Upholstered Roller Pad (32#) on each side of Roller Pad Tube (31#)
secure wit
2. Attach Leg Support (29#) to Main Frame (1#) using L Pin (34#).
Note: Wrench Tighten bolts and Nylon Lock nuts.
hFoam Cap (33#) and Hexagon Head Screw M8*25 (41#).

41
41

Customer Service: 1-800-719-4605