XMark Fitness XM-9010 User manual

Owner’s Manual
10/13
XM-9010
COMMERCIAL FID
DUMBBELL BENCH

Table Of Contents
Before You Start
3Important Safety Information
4
Assembly 5-9
Parts List
Exploded View 11
Warranty Information
2
10
12

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tativ eruliaF.naicinhcetssentiFKRAMXaybdetcurtsniro/dnadezirohtuasselnu,e
to follow these instructions will void the warranty.
Important Safety Information
3

MODEL:
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
4
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.
MAILING ADDRESS
2791 Valley View,
Shreveport, LA 71108
XMARK Fitness
XM-9010

Assembly
5

Assembly
NOTE: Hand tighten bolts and nylon lock nuts until machine is fully assembled.
Step 1
Attach Main Frame (#1) to Shaped Base (#3) using:
• two M10*25 Button Head Cap Screws (#29)
• two M12 Nylon lock Nuts (#37)
• four Φ11*Φ23*2 Flat Washers (#34)
Attach Rear Base (#2) to Main Frame (#1) using:
• two M12*75 Button Head Cap Screws (#27)
• two M12 Nylon Lock Nuts (#36)
• four Φ13*Φ26*2 Flat Washers (#33)
6

Step 2
Attach Frame Seat Pad Support (#4) to Main Frame (#1) using:
• one M12*125 Button Head Cap Screw (#26)
• one M12 Nylon lock Nut (#36)
• two Φ13*Φ26*2 Flat Washers (#33)
NOTE: Wrench tighten bolts and nylon lock nuts.
7
Assembly

Step 3
Attach Frame Back Pad Support (#5) to Main Frame (#1) using:
• one M12*125 Button Head Cap Screw (#26)
• one M12 Nylon Lock Nut (#36)
• two Φ13*Φ26*2 Flat Washers (#33)
Attach Frame Adjustable Back Pad (#6) to Frame Back Pad Support (#5) using:
• one M12*125 Button Head Cap Screw (#26)
• one M12 Nylon Lock Nut (#36)
• two Φ13*Φ26*2 Flat Washers (#33)
NOTE: Wrench tighten bolts and nylon lock nuts.
8
Assembly

Step 4
Attach Upper Back Pad (#8) and Lower Back Pad (#9) to Frame Back Pad Support (#5) using:
• four M10*70 Button Head Cap Screws (#28)
• four Φ11*Φ23*2 Flat Washers (#34)
Attach Seat Pad (#10) to Frame Seat Pad Support (#4) using:
• two M10*70 Button Head Cap Screws (#28)
• two Φ11*Φ23*2 Flat Washers (#34)
Attach Frame Seat Pad Support (#4) to Main Frame (#1) using:
• one Pop Pin (#11)
• one M8*20 Socket Head Cap Screw (#32)
• one M8 Nylon Lock Nut (#38)
• two Φ9*Φ16*1.6 Flat Washers (#35)
NOTE: Wrench tighten bolts and nylon lock nuts.
9
Assembly

Parts List
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
1
1
1
1
1
1
1
1
1
1
1
2
6
2
2
2
1
2
2
2
2
1
2
4
2
4
2
6
2
2
12
1
12
10
18
6
2
3
1
1
1
P00701
P00247
P00702
P00703
P00047
P00645
P00413
P00048
P00051
P00704
P00203
P00584
P00573
P00705
P00706
P00248
P00249
P00152
P00155
P00153
P00154
P00586
P00030
P00004
P00707
P00621
P00624
P00610
P00597
P00639
P00636
P00708
P00035
P00032
P00136
P00562
P00561
P00564
P00560
H00041
M00041
Main Frame
Rear Base
Shaped Base
Frame Seat Pad Support
Frame Back Pad Support
Frame Adjustable Back Pad
Nylon Spacer
Upper Back Pad
Lower Back Pad
Seat Pad
Pop Pin
Small Grips
Iron Bushing, 25*12.2*8
Foot Sleeve
Plug
Plug 40*80
Plug, 50.8*76.2
Foot Cap 2, Right 50.8*76.2, XM Series
Foot Cap, Left 50.8*76.2 XM Series
Foot Cap, Right 50.8 XM Series
Foot Cap, Left 50.8 XM Series
Rubber Pad
Wheel
Spacer
Non Skid Pid
Button Head Cap Screw M12*125
Button Head Cap Screw M12*75
Button Head Cap Screw M10*70
Button Head Cap Screw M10*25
Button Head Cap Screw M8*45
Button Head Cap Screw M8*25
Socket Head Cap Screw M8*20
Flat Washer Φ13*Φ26*2
Flat Washer Φ11*Φ23*2
Flat Washer Φ9*Φ16*1.6
Nylon Lock Nut M12
Nylon Lock Nut M10
Nylon Lock Nut M8
Hex Key S6
Hardware
Owner's Manual
Ref # Part # Description Qty
10

Exploded View
11

XMARK Fitness
2791 Valley View Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605