XMark Fitness XM-2832 User manual

Owner’s Manual
8/09
XM-2832
HEAVY BAG WALL MOUNT

Table Of Contents
Before You Start
Important Safety Information
Assembly 5-6
Parts List
Exploded View
Warranty Information
2
3
4
8
7
9

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a XMARK Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
3

MODEL: XM-2832
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
MAILING ADDRESS
7501 Trammel Drive
Shreveport, LA 71108
4
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
XMARK Fitness
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.

Assembly
5
[10#] M10*20 2pcs
[9#] ST9.5*75 4pcs
[8#] φ11*φ20*1.5 6pcs
[12#] φ10 2pcs

Assembly
Attach two Support Frames (#2) to the Main Frame (#1) using:
• two M10*20 Hex Head Bolts (#10)
• two Φ11*Φ20*1.5 Flat Washers (#8)
• two Φ10 Spring Washers (#12)
Attach the Gear Hook (#11) to the Shaft (#3).
NOTE: Wrench tighten bolts and nylon lock nuts.
6
NOTE: Mounting Hardware, Hex Screw ST9.5 x 75 (9) and Flat Washer 11 x
20 x 1.5 (8) are included for wall installation.

Parts List
XM-2832 Parts List
1
2
3
4
5
6
7
8
9
10
11
12
14
15
16
1
2
1
1
1
1
1
6
4
2
1
2
1
1
1
P00854
P00855
P00856
P00857
P00858
P00859
P00860
P00031
P00839
P00861
P00149
P00130
P00022
H00046
M00046
Main Frame
Support Frame
Shaft
Bearing ID20
Clip Φ42
Bearing 51104
Retaining Snap Ring
Flat Washer Φ11*Φ20*1.5
Hex Screw ST9.5*75
Hex Head Bolt M10*20
Gear Hook
Spring Washer 10
Wrench 17-19
Bolt Pack
Owner's Manual
Ref # Part # Description Qty
7

Exploded View
8

XMARK Fitness
7501 Trammel Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605