XMark Fitness XM-7612 User manual

Owner’s Manual
XM-7612
8/09
SEATED PREACHER CURL

Table Of Contents
Important Safety Information 3
Before You Start 4
Assembly 5-7
Parts List 8
Exploded View 9
Warranty Information 10
2

NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.
SAFETY PRECAUTIONS
SAFETY INFORMATION WARNING!
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. XMARK Fitness assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
• This unit should only be used on a level surface and is intended for indoor use
only. XMARK Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a XMARK Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
3

MODEL: XM-7612
This manual will guide you through the assembly process. If at any time you
are having trouble with the assembly or use of this product, then please contact
When calling please have the following product information available:
Model Name :
Date Mfg.:
Serial #
Model Name Decal Location
Before You Start
REGISTRATION CARD
QUESTIONS?
CALL 1-800-719-4605
Monday-Friday
8:30 a.m.-5:00 p.m.
(Central Standard Time)
MAILING ADDRESS
7501 Trammel Drive
Shreveport, LA 71108
4
THANK YOU for making this unit a part of your exercise
program.
XMARK Fitness assures the very best in value,
appearance, durability and biomechanics.
XMARK FITNESS SERIES
XMARK Fitness
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register online at www
.xmarkfitness.com within 10 days
of purchase.
us at our
XMARK Fitness help line. We have trained service technicians on site to
take care of you, our valued customer.

Assembly
5

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 1
Connect the Seat Frame (#3) to the Rear Base (#4) and the Weight Support (#1) using:
• one M10*90 Button Head Cap Screw (#16)
• two M10*100 Button Head Cap Screw (#18)
• six Φ11*Φ20*2 Flat Washers (#13)
• three M10 Nylon Lock Nuts (#19)
6

Assembly
NOTE: Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 2
Attach the Support, Telescoping Arm (#2) to the Seat Frame (#3).
Attach the Seat Pad (#7) to the Seat Frame (#3) using:
• two M10*80 Button Head Cap Screw (#17)
• two Φ11*Φ20*2 Flat Washers (#13)
Attach the Pad, Arm Curl (#8) to the Support, Telescoping Arm (#2) using:
• two M10*30 Button Head Cap Screw (#14)
• two Φ11*Φ20*2 Flat Washers (#13)
Use Pop Pin to select height of Arm Pad.
7

XM-7612 Parts List
Ref # Part # Description Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
1
1
1
1
2
1
1
2
2
2
1
10
2
4
1
2
2
3
4
1
1
1
1
P00316
P00317
P00318
P00319
P00203
P00519
P00066
P00067
P00153
P00154
P00138
P00572
P00134
P00598
P00636
P00615
P00613
P00589
P00561
P00136
P00560
P00022
H00017
M00021
Weight Support, XM-7612
Support, Telescoping Arm XM-7612
Seat Frame, XM-7612
Rear Base, XM-7612
Pop Pin XM Series
Rubber Pad
Seat Pad, XM-7612
Pad, Arm Curl XM-7612
Foot Cap, Right 50.8 XM Series
Foot Cap, Left 50.8 XM Series
Glide Sleeve
Knob Bolt
Flat Washer Φ11*Φ20*2
Button Head Cap Screw M10*30
Button Head Cap Screw M8*25
Button Head Cap Screw M10*90
Button Head Cap Screw M10*80
Button Head Cap Screw M10*100
Nylon Lock Nut M10
Flat Washer Φ9*Φ16*1.6
Hex Key S6
Wrench 17-19
Bolt Pack, XM-7612
Owner's Manual XM-7612
Parts List
8

Exploded View
9

XMARK Fitness
7501 Trammel Drive
Shreveport, LA 71108
Customer Service: 1-800-719-4605