Yealink MeetingBar A30 Kit User manual

Yealink MeetingBar A30 Kit
English | 󳼢󱌬󱈆󲤿| Deutsch | Français | Español
Quick Start Guide (V1.0)
Microsoft
Teams
Certied for
Microsoft
Teams
Certied for

Table of Contents
English..............................................................1
󳼢󱌬󱈆󲤿 ...................................................................... 9
Deutsch.............................................................17
Français...........................................................25
Español...........................................................33

1
Package Contents
MeetingBar A30 3 m Ethernet Cable 1.8 m HDMI Cable×2
(for the display device)
Cable Ti ×5 Power Adapter
×4
×2
×2
Mounting Bracket and
Accessories Silicone Pad×2 Quick Start Guide
• Standard accessories
• Optional accessories
VCR11 AAA Battery×2
CTP18 7.5 m Ethernet Cable Mounting Bracket Screwdriver
and Accessories
VCH51 Interface 7.5 m
Protective Cover Ethernet Cable
Remote Control Package Touch Panel Package
(Standard accessory on Zoom edition)
VCH51 Sharing Kit
WPP20 Type-C Adapter
Wireless Presentation Pod-WPP20



2
2
2
Cable Lock Box PoE Adapter
0.6 m 0.6 m
HDMI Cable USB Type-C Cable
Cable lock box 3M Velcro PSE Ethernet Cable
(3 m CAT5E FTP cable) Power Cord
EN
WPP30
Wireless Presentation Pod-WPP30

2
Remove the Protective Shell
TV
TV
H>120 cm
H<120 cm
10 cm
Endpoint Installation
• Mount on a Wall
Step1: Determine A30 position
The mounting height affects your camera view. The recommended
height is 1.1 m above the ground.
Endpoint embedded installation
is prohibited (For example:
inside the wall, enclosed
space).
Step2: Assemble the mounting bracket
Use the bracket to mount your endpoint on a wall.
Unboxing Video
󶏢Teams󶏣
Unboxing Video
󶏢Zoom󶏣

3
4
5
睞睞睥NN
3
TV
Step3: Mount the A30 to the wall
Hole depth: 6 mm
Hole diameter: 30 mm
T4×30 screws
• Put on a desk

4
TV TV
15°
15°
1
• Put on a TV stand cart platform
Adjusting the Camera Tilt
Silicone Pad

5
CTP18 Connection
Reset
MAC
SN
Endpoint Connection
If you only need to use one display, please connect to HDMI 1 port.
Make sure that CTP18 and the
MeetingBar A30 are in the same
LAN.
MeetingBar A30 (Endpoint)
Power Adapter
3 m Ethernet Cable
1.8 m
HDMI
Cable
Display
(Not included)
Display
(Not included)
The functions of the
VC Hub/Phone port
and the Internet
port are different,
pay attention to the
connection method.
3 m Ethernet Cable 7.5 m Ethernet Cable
PoE
CTP18

6
Pair with the CTP18 (Optional)
For a better pairing experience, we recommend starting the A30 endpoint rst and then the CTP18.
If you purchased a combination kit, MeetingBar A30 and CTP18 would be paired automatically. You
can go to step 2 directly.
Find a networked computer and operate it
according to the interface prompts of CTP18 and
MeetingBar A30.
1. Pair manually: On the CTP18, enter the IP address of the MeetingBar A30 on display.
2. Initialize language, time zone, and auto update, and select the desired platform. If you
select Device Mode, skip to the Device Mode section.
3. Account login (Contact the corresponding service provider to obtain an account)
MeetingBar A30
CTP18
Zoom: Follow the prompts on CTP18 to sign in account.
Method 1: Sign in the website Method 2: Sign on the device
Use the remote control to operate if your display
does not support touch.
Teams:
Sign in the same Microsoft Teams account on both CTP18 and MeetingBar A30.
Select the desired endpoint on the CTP18.
Enter the pairing code displayed on the endpoint on CTP18 and complete pairing.
CTP18 Pair Video
(Teams)
CTP18 Pair Video
(Zoom)

7
Wireless Content Sharing/ Wireless Device-USB Mode
Wireless Presentation
Pod
WPP20/WPP30 cannot be used when the endpoint uses a wireless network.
PC Presentation button
Wireless Content
Sharing Video
(Teams)
Wireless Device
USB Mode Video
(Teams)
Wired Content
Sharing Video
(Teams)
Wired Content
Sharing Video
(Zoom)
Wireless Device
USB Mode Video
(Zoom)
Wireless Content
Sharing Video
(Zoom)
Wired Content Sharing/ Wired Device-USB Mode
Wired Content Sharing
Ethernet Cable
USB-C cable with Adapter
PC
USB-C
HDMI
HDMI Cable
OR
HDMI
PoE
VCH51
USB-C
Device Mode
Device Mode
Video
VC Hub/
Phone
1. Do one of the following to select Device Mode:
• When selecting a platform during power-on initialization, select Device Mode.
• Switch platforms after logging in:
Teams: Go to More >Settings >Device Settings >UC Provider, enter the admin password
(0000), and select Device Mode.
Zoom: Go to Settings >General >System Settings >UC Provider, enter the admin password
(0000), and select Device Mode.
2. Refer to steps 1 and 2 of Wireless Device-USB Mode or Wired Device-USB Mode to enter
Device Mode.
Wireless Content Sharing
1. Connect the WPP20/WPP30 to the USB-A port of the
MeetingBar A30. Waiting for 3 seconds, MeetingBar A30
prompts “Wireless presentation pod pairing successfully”.
2. Connect the WPP20/WPP30 to the PC and press the
Presentation button to share the screen.
Wireless Device-USB Mode
1. Connect the WPP30 to the USB-A port of the Meeting-
Bar A30. Waiting for 3 seconds, MeetingBar A30 prompts
“Wireless presentation pod pairing successfully”.
2. Connect the WPP30 to the PC.
3. On the Yealink Wireless Presentation Pod software, click
BYOD Mode >Press to share.
Connect VCH51 and MeetingBar A30 with an Ethernet Cable, and connect VCH51 and PC
with a USB-C Cable or HDMI Cable.
• Share screen after the HDMI cable is connected.
• The CTP18 paired with the MeetingBar A30 will prompt whether to enter the BYOD mode,
and click Cancel to share screen after the USB-C Cable is connected.