Yealink MVC Series User manual

Yealink Network Technology CO., LTD
Yealink MVC Ⅱ Series for Microsoft Teams Rooms System
Quick Start Guide(V2.0)
V32.35
English | 简体中文

We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in poor performance.
4MVC300ⅡPackage
UVC30 Room UVC30 Room
Quick Start Guide
UVC30 Room Package (Camera)
Camera Lens
Privacy Cover
CP900 CP900
Quick Start Guide
Carrying Case
CP900 Package (Microphone)
5m
USB Extension Cable
MCore Package
Bracket
1.8M
HDMI Cable×2 Velcro×2MCore Power Adapter Screwdriver
++
4
4
Expansion Screw
and Machine Screw
MCore
Quick Start Guide
(M3×8 screw)
×2
MTouchⅡPackage (Touch Console)
MTouchⅡMTouchⅡQuick Start Guide
7.5m
Ethernet Cable
USB Tpye-C Cable
(with an HDMI adapter) Screwdriver
(M3×8 screw)
×2

MVC900Ⅱ& MVC800Ⅱ& MVC500Ⅱ& MVC300ⅡConnection
MVC900ⅡConnection
Do not connect the switch to the Internet, otherwise it will cause network abnormalities.
When starting up the system for the first time, you need to connect a mouse to complete the initial configuration.
We recommend using the wireless mouse and keyboard kit.
For more information about the installation and deleployment of accessories (for example, the installation of MCore package or
the camera-hub), refer to the Quick Start Guide of corresponding accessory.
5The switch and ethernet cables should be purchased separately.
Projector
VCH InternetHDMIHDMI 5V
DC19V
5V
Display
HDMI MTouchⅡEthernet Cable
...
CAT5e
VCM34(Optional)
VCM34
(Optional)
UVC80UVC80
CAT5e
CAT5e
CAT5e
CAT5e
CAT5e
CAT5e CAT5e
Camera-Hub
USB3.0 to Ethernet
Adapter
MSpeakerⅡ(Optional)
3m RCA to
3.5mm Audio Cable
Switch
VCM34
(Optional)
VCM34
(Optional)
HDMI MCore
USB Tpye-C Cable
(with an HDMI adapter)
CAT5e

MVC300ⅡConnection 7For more information about the installation and deleployment of accessories (for example, the installation of the MCorepackage or
the UVC30 Room camera), refer to the Quick Start Guide of corresponding accessory.
When starting up the system for the first time, you need to connect a mouse to complete the initial configuration.
We recommend using the wireless mouse and keyboard kit.
Wireless Sharing
WPP20
Wireless Presentation Pod
PC
You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs
to be purchased separately.
Make sure the MTouch
Ⅱ is connected to the MCore.
Procedure
1. Connect the WPP20 to the USB port of the MTouch Ⅱ .
2. Wait for about 3 seconds, the WPP20 LED indicator glows
solid green.
The WPP20 is paired with the MTouch
Ⅱ successfully.
3. Connect the WPP20 to the PC.
VCH InternetHDMIHDMI 5V
DC19V
5V
Display
Display
USB2.0
USB2.0
HDMI
HDMI
Ethernet Cable
UVC30 RoomCP900MTouchⅡUSB Tpye-C Cable
(with an HDMI adapter)
CAT5e

8Upgrading System Software through Windows Update
Enabling Automatically Windows Update
Procedure
1. On the display screen, navigate to More-> Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5 . Tap the Start button, and then go to Settings->Upgrade & Security->Windows Update , and
select Advanced options .
6. Enable Automatically download updates, even over metered data connections
(charge may apply) .
The system software(including the Windows, the Camera-Hub/UVC80/UVC50/UVC30 Room, the
MTouchⅡ) can be automatically upgraded via windows update by default.
Otherwise, you can enable automatically windows update or upgrade the devices manually.
The software upgrade is only supported by the operating system of 64-bit Windows 10.
Manually Windows Update
Procedure
1. On the display screen, navigate to More ->Settings.
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings.
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Do one of the following:
Long tap the Start button, and then select
Device Manager .
Select the desired device and then long tap the device to select Update driver .
Select a desired way to update.
Tap the Start button, and then n
avigate to Settings->Upgrade & Security->Windows Update ,
and select Check for updates .
Select the desired device and then complete the installation.

Resetting UVC80/UVC50/UVC30 Room Camera to Home Position
1. Tap More-> to enter the Camera Control page.
2. If you are using MVC900
Ⅱ system, select a desired UVC80 camera.
3.Tap
Reset .
Procedure
Controlling UVC80/UVC50/UVC30 Room Camera Position
1. Tap More-> to enter the Camera Control page.
2. If you are using MVC900
Ⅱ system, select a desired UVC80 camera.
3. Tap or to zoom camera in/out.
4. Tap the arrow keys to pan/tilt the camera.
Procedure
If the auto-framing feature is enabled, you can not control the UVC30 Room camera.
Enabling/Disabling Auto-framing
1. Tap More-> to enter the Camera Control page.
2. Select .
3. Enable/Disable Auto-framing.
Procedure 9