Yealink MVC640-C4-F13 User manual

MVC640-C4-F13MVC640-C4-F13
For the operation video, please refer to MVC640-C4-F13 Unboxing.
Minimum RequirementsMinimum Requirements
A display connected to MCore Pro (not included).
A Microsoft Teams Rooms or Skype® for Business account (not included).
Wired network environment (not included).
Package ContentsPackage Contents
MVC640-C4-F13
1

MVC640-C4-F13
2

MVC640-C4-F13
3

Install MVC640-C4-F13Install MVC640-C4-F13
MCore Pro supports: mount on the wall, mount on the TV, stick to the table.
MTouch E2 supports: put on a table, mount on a wall.
UVC84 supports: put on a flat surface, mount on top of a display, mount on the wall, mount on the ceiling,
mount on the TV mount.
Install and deploy the accessories in the system according to the environment and actual needs. For how to
install and deploy, please refer to the quick start guide of each product.
Connect MVC640-C4-F13Connect MVC640-C4-F13
MVC640-C4-F13
4

Initial SetupInitial Setup
1. Press the power button on the bottom left of MCore Pro, and the Microsoft Windows 10 IoT Enterprise Edition
operating system will be automatically loaded after starting MCore Pro.
NOTENOTE
When starting up the system for the first time, you need to connect a mouse to complete the initial
configuration. We recommend using the wireless mouse and keyboard kit.
Not included accessories requirements:
Display: Resolution of 1080p or higher and with an HDMI port.
PC: Equipped with HDMI or USB-C (support DP protocol) Port.
Ethernet cable: CAT5e or higher ethernet cable.
HDMI: Standard HDMI cable.
PoE switch: If you use PoE to connect speakers or cameras, you need to use PoE+.
MVC640-C4-F13
5

2. Select the check box on the EULAEULA page, and then tap NextNext.
3. Enter the account, the password on the AccountAccount page, and then tap NextNext. Supports Microsoft Teams Rooms or
Skype® for Business accounts.
4. On the AdvancedAdvanced page, configure the domain and tap NextNext.
5. Tap FinishFinish to complete the setup wizard.
FeaturesFeatures
Wireless SharingWireless Sharing
1. Connect the WPP30 to the USB port of the MTouch E2.
When pairing, the LED indicator of WPP30 is orange. When the pairing is successful, the LED indicator turns
green breathing light.
2. Connect the paired WPP30 to the USB-A/USB-C port on your PC.
3. On the WPP30, press the presentation button to share the full screen.
Control UVC84 Camera PositionControl UVC84 Camera Position
1. Tap More > to enter the Camera Control page.
Supported AccessoriesSupported Accessories
NOTENOTE
When starting up the system for the first time, you need to connect a mouse to complete the initial
configuration. We recommend using the wireless mouse and keyboard kit. After the system is initialized, you
can use MTouch E2 to complete the system login and settings, and the device will automatically start the
Microsoft Teams conference system application and enter the setting page.
MVC640-C4-F13
6

For the compatible devices and the maximum number of compatible devices, please refer to Teams Room
Accessories Compatibility Lists.
MVC640-C4-F13
7