Yealink VC210 Teams Edition User manual

Applies to firmware version 118.15.0.15 or later
Video Conferencing Endpoint
VC210 Teams®Edition
English | 简体中文
Quick Start Guide
快速入门指南 (V15.15)
适用于 118.15.0.15 及之后的版本

2
Note:
• We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in reduced performance.
• Use the Yealink original PoE adapter (54V/0.56A) to charge the endpoint only. The use of the third-party PoE
adapter may cause the damage to the endpoint.
• Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
Package Contents
VC210 VCR20-MS 3m 1.8m Cable Tie×5
Remote Control AAA Battery×2 Ethernet Cable HDMI Cable
(for the display device)
1/4”-20 UNC Camera Lens CP900 Room Package Quick Start
Screw Privacy Cover (Optional) PoE Adapter Guide
PSE 2m Ethernet Cable
(CAT5E FTP cable)
Power Cord
Endpoint Installation
Select one of the following installation method:
• Put on a Flat Surface
You can put the endpoint on a conference room table.
• Mount on top of a TV
You can mount endpoint on top of the TV when the thickness of the TV is between
1mm and 36mm.
TV TV
Note:
• The base of the camera must be parallel to the top of TV.
• You can adjust the angle of the camera manually. The angle can be up to 30 degree.
• Choose other installation method if the thickness of the TV is more than 36 mm.
CP900 5m EXT
USB Cable

3
• Mount on a Wall
You can purchase a bracket to mount your endpoint on a wall. The recommended
height is 1.6m above the ground.
48mm
Hole depth: 30mm
Hole diameter: 6mm
1
Expansion bolts
2T4×30 screws
3
1/4”-20 UNC screw
• Mount onto a TV Stand or a Tripod
You need to purchase a TV stand or a tripod separately. The TV stand or a tripod
should be able to bear the weight of at least 5kg.
TV Stand
1/4”-20 UNC screw

4
Endpoint Connections
Remote Control and Cable Ties Installation
Audio Device Connection
CP900
Display
1.8m HDMI Cable
PSE
7.5m Ethernet Cable
2m Ethernet cable
Wired network
PSE
7.5m Ethernet Cable
Wireless network
Wi-Fi
Connect the following accessory to enhance your audio experience:
Note:
• If you connect a touch display device, you can operate the VC210 either by remote control or touch control.
• If you connect a non-touch display device, you can only use the remote control.

5
Sign in to Microsoft Teams
Web Sign-in (Recommended method)
To sign in to Microsoft Teams via web sign-in:
1. Select Sign in.
You will be connected to the Company Portal automatically.
2. Select Sign in from another device from the Sign in screen.
3. Go to https://microsoft.com/devicelogin on your computer.
4. Enter the code shown on your endpoint and select Next.
5. Enter your account credentials or select a desired account to sign in.
A confirmation message is displayed after you successfully sign in to Microsoft
Intune Company Portal.
VCR20 Remote Control Introduction
1
2
3
4
5
Mute Key
Scroll Wheel
Press to mute or unmute microphone.
Answer Key
Teams Key
Auto Framing
Press to join meeting.
Press to enable or disable auto framing feature.
6
7
8
Navigation Key
End Call Key/Back Key
Volume Up/Down Key
• Long press to leave a meeting.
• Press to return to the previous menu.
Press to increase/decrease the volume.
Navigate through menu items.
• Scroll up to increase the focal length of the camera.
• Scroll down to decrease the focal length of the camera.
• Press to confirm the action.
Press to answer a call.
1
2
3
4
5
6
7
8

6
Normal Sign-in
To sign in to Microsoft Teams on your endpoint:
1. Select Sign in.
You will be connected to the Company Portal automatically.
2. On the Sign in screen, enter the account information and select Next.
3. Follow the on-screen prompts.
Camera Settings
You can make basic PTZ control for your camera.
To control the camera position via the remote control or touch control:
1. Select More > Settings > Device Settings > Control.
2. Select / to zoom camera out/in.
3. Select the arrow keys to pan/tilt the camera.
To reset the camera position via the remote control or touch control:
1. Select More > Settings > Device Settings > Control.
2. Select Reset.
You can also change the Exposure Settings, White Balance Setting, Graphics and
enable/disable Auto Framing and so on.
For more information, see related documentations, including User Guide and
Administrator Guide, on your phone’s Support page: http://support.yealink.com/. You
can also contact the Yealink technical support team for help.

7
说明：
• 我们推荐使用由亿联提供或经亿联认可的配件和线缆，使用未经认可的第三方配件和线缆可能会导致性能的下降。
• 我们要求使用亿联原装 PoE 电源（54V/0.56A），使用第三方电源可能会导致终端损坏。如果使用过程中发现线
缆破皮，请立即更换。
• 使用 HDMI 线前，请套上磁环用于抗电磁干扰。
包装清单
VCR20-MS 1.8m HDMI 线
VC210 遥控器 7 号电池 ×2 3m 网线 （用于接显示设备） 束线带 × 5
1/4”-20 UNC CP900 Room 包 快速
英制螺钉 镜头隐私盖 （可选） PoE 电源 入门指南
PSE 2m 网线
(FTP 超五类以太网线 )
电源线
安装终端
你可以根据实际需要选择安装终端的方式：
• 平放安装
将终端摆放在水平桌面。
• 挂装
当电视厚度范围为 1mm-36mm 时，你可以根据图示将终端挂在电视上。
TV TV
说明：
• 尽量保证终端底壳与电视上方水平。
• 手动调节摄像机上下角度时，最大调整范围为 30°角。
• 电视厚度超过 36mm 时，请勿使用挂装方式，终端有跌落风险。请选用其他安装方式。
CP900 5m
USB 延长线

8
• 墙装
你可以选购支架将终端安装在墙上，安装高度建议 1.6m。
48mm
打孔直径：30mm
打孔深度：6mm
1
膨胀螺栓
2螺丝规格：T4×30
3
螺丝规格：
1/4”-20 UNC 英制螺钉
• 电视架或三脚架安装
你可以将终端安装在自行选购的电视架或三脚架上，选购的电视架或三脚架承重至少
为 5kg。
电视架
螺丝规格：
1/4”-20 UNC 英制螺钉

9
连接终端
安装遥控器电池和使用束线带
音频设备连接
CP900
显示设备
1.8m HDMI线
PSE
7.5米网线
2米网线
有线网络
PSE
7.5米网线
无线网络
Wi-Fi
连接以下配件增强音效体验：
说明：
• 如果你连接的是触控式显示设备，你可以使用遥控器或者触摸屏操作终端。
• 如果你连接的是非触控式显示设备，你只能使用遥控器操作终端。

10
登录
网页登录（推荐）
通过网页端登录 Teams 账号：
1. 选择登录。
你将自动连接到 Company Portal。
2. 在登录界面选择从其他设备登录。
3. 在电脑上访问 https://microsoft.com/devicelogin 。
4. 输入显示在终端上的验证码，然后选择下一步。
5. 输入账号信息或者选择账号登入。
成功登录到 Microsoft Intune Company Portal 后，将显示一条确认消息。
遥控器介绍
1
2
3
4
5
静音键
滚轮
麦克风静音 / 取消静音。
接听键
Teams 键
自动框全景
按下按键加入会议。
开启 / 关闭自动框全景功能。
6
7
8
导航键
挂断键 / 返回键
音量加减键
• 长按离开会议。
• 返回上一级菜单。
提高 / 降低音量。
导航菜单项。
• 向上滑动放大摄像机画面。
• 向下滑动缩小摄像机画面。
• 确认执行操作。
接听来电。
1
2
3
4
5
6
7
8