Yealink Enterprise SIP-T28P User manual

A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and pressing the
Transfer softkey to call out.
A would be on hold and the LCD would display as Transferred. A could press the Cancel softkey button
to be disconnected from the call.
If C picks up the phone call, B would be able to talk to C.
A press the TRAN button or Transfer softkey to put B on hold followed with dialing C and pressing the
OK or SEND button to call out.
While C is ringing, A hang up or press the Transfer softkey. Then A will turn to the hold status, and the
LCD will display as Transferred
A will be disconnected from the call, when C pick up, B can talk to C
A press TRAN Button or Transfer softkey to put B on hold followed with dialing C and press the OK or
SEND button to call out
After C answered it, A and C can have a private conversation without B, then A press Tran button to
complete the transfer
A will be disconnected from the call. B can talk to C
V51.0
Call Forward->Enter
You can download the latest user manuals from our website:
http://www.yealink.com/en/download.asp?BigClassName=IP%20Phone
If A and B are on a conversation and B may want A to transfer the call to C, three ways could
be used to transfer the call: Blind Transfer, Attended Transfer, and Semi-Attended Transfer.
DND Code, etc.
Key as Send,
User can check the status of IP phone: IP address, MAC, Firmware,etc.
User can check and configure the accounts information including the name,
password, SIP Server, etc.
Allowing the users to check and edit the Voice Mail and Text Message.
Call history are shown here:

An incoming call to the device, or call on mute
Table 4 Line Keys set to BLF
, or there is call on hold
Press the HOLD button or Hold softkey to put your active call on hold and then the corresponding line
key will blink
If there is only one call on hold, press the Resume softkey or Hold button to retrieve the call
set to BLF the power indicating LED will blink
When the call is answered, press the CONF button, the conference call will now include you and the
other two parties
It is inactive as BLF
An incoming call to the monitored account
It is inactive as BLF
Blinking red There is an incoming call to the monitored account
The monitored account is on an conversation