Zamel Exta PBM-04/U User manual

PBM-04/U BI-STABLE VOLT FREE RELAY SERVICE MANUAL
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamelcet.com, e-mail: [email protected]
VER. 001_04.08.2010
APPEARANCE
FEATURES
TECHNICAL DATA
DESCRIPTION
PBM-04/U
Tripping terminal: IN
Tripping terminals for illuminated switches: IN’, IN’
Tripping rated voltage: 12 ÷ 230 V AC/DC
Supply voltage tolerance: -15 ÷ +10 %
Rated frequency: 50 / 60 Hz
Rated power consumption: 0 mA
Rated triggering power consumption: 11 mA
Relay contact parameters: 1NO - 10 A / 250 V AC1 2500 VA
Number of terminals: 7
Section of wire conductors: 0,2 ÷ 2,50 mm2
Operating temperature: -20 ÷ +45 oC
Operating position: optional
Fixing of the casing: TH35 rail (in accordance with PN-EN 60715)
Protection degree of casing: IP20 (PN-EN 60529)
Protection class: II
Overvoltage category: II
Degree of pollution: 2
Surge voltage: 1 kV (PN-EN 61000-4-5)
Dimensions: single module (17,5 mm) 90x17,5x66 mm
Weight: 0,065 kg
Compliance with the following standards: PN-EN 60669-1
PN-EN 60669-2-1
PN-EN 61000-4-2,3,4,5,6,11
PBM-04/U bi-stable relay is used to
control lighting or any other device with
the help of unipolar parallel connected
switches. Another push of any switch
causes actuation or disengagement of
devices connected to output terminals
(change in relay status). The device
enables to use typical unipolar switches
connected to IN inlet and switches with
illumination connected to IN’ inlets (trip-
ping only from L line for 230V voltage).
Structure of the relay enables to record
the current status in case of loss of sup-
ply voltage. Zero power consumption
stands as an important feature of the
device.
This device must be in-
stalled in one-phase sup-
ply network, according to
legally binding regulations
and standards. Installation
must be carried out accor-
ding to this instruction ma-
nual. Procedures such as:
installation, connection and adjustment of
the device should be carried out by qualied
electricians who are familiarised with this in-
struction manual and device functions. If the
casing is dismantled, the warranty expires
and there is the danger of an electric shock.
Before installation, make sure that voltage
is not present on the conductors. Use cross
screwdriver with diameter of 3.5 mm, for in-
stallation. Transport, storage and use of this
device inuence its correct operation. Instal-
lation of this device is not recommended in
the following situations: lack of parts, dama-
ge or deformations of the device. In the case
of incorrect functioning of the device, please
contact the manufacturer.
NOTE
● Bi-stable (biconditional) lighting con-
trol,
● universal scope of 12 ÷ 230 V AC/DC
supply voltage,
● zero power consumption,
● memory of relay status,
● cooperation with numerous unipolar
switches, also the ones with illumina-
tion,
● two wire control installation,
● relay output – one short circuiting con-
tact with maximal capacity of 10 A.
Relayoutput
Tripping terminal (IN)
Tripping terminals (IN’)
Power supplyterminal (A2)
terminals (11, 11, 14)
The symbol showing a selective
collection of electric and
electronic equipment.
Used up equipment must not be
placed together with another kind
of waste.

VER. 001_04.08.2010
MOUNTING, FUNCTIONING CONNECTION
TIME COURSES
FAMILY OF PRODUCTS
PBM-04/U bi-stable relay belongs to PBM bi-
stable relays
DIMENSIONS CAPACITY
NTERNAL SCHEME
1. Disconnect supply circuit by means of
fuse, overcurrent protection device or
switch disconnector connected to ap-
propriate circuit.
2. Check the voltage free status on
supply connectors using an appro-
priate tester.
3. Install PBM‑04/U device in switching
station on TH-35 transfer busbar
4. Connect leads to the connecting ter-
minals according to the electrical dia-
gram.
5. Switch on the supply circuit.
The device if ready to operate after
proper connection. Proper operation of
the relay may be veried by pushing the
release switch several times – the device
should engage and disengage the load
connected to its output terminals. IN’
control inputs are inlets aimed to be com-
patible with illuminated switches supplied
with 230 V AC voltage. IN input is a uni-
versal control input for switches supplied
with 12÷230 V AC/DC voltage.
1250 W 600 W
300 W 450 W
t
t
IN
IN’
T
IN
IN’
A2
14
11
11
Supply version:
24V - 24V AC/DC available for
PBM-01, PBM-02, PBM-03,
12-24V- 12÷24V AC/DC available for
PBM-05
U - universal supply voltage
12÷230V AC/DC
Version of the device:
01 - basic
02 - extended with SET and RESET
functions, as well as status memory
03 - with time limit function
04 - volt-free with status memory
05 - volt-free with SET and RESET
functions, as well as status memory
Type of casing:
M – module
P – cable box
Symbol of the device
Compatibility with unipolar switches with backlight
(only for 230 V AC voltage)
Compatibility with unipolar switches without backlight
(voltage: 12 ÷ 230 V AC/DC)
L(+)
N(-)
L
N
WARRANTY CARD
Salesman stamp and signature, date of sale
There is 24 months guarantee on the product
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.

X-ON Electronics
Authorized Distributor
Click to view similar products for General Purpose Relays category:
Other Similar products are found below :
PCH124D2MH000 LY2ZDC24 FC3251 MJN1CAC24 MKS2XTIN11DC110
8501RS44V24 8501RSD14P14V51 8501XO40V02 G2RK112VDC 13932607