3One data IES6306 Series User manual

IES6306 Series
Industrial Ethernet Switch
User Manual
Document Version: 01
Issue Date: 11/22/2021
Industrial Ethernet communication solution experts 3onedata Co., Ltd.

Copyright © 2021 3onedata Co., Ltd. All rights reserved.
No company or individual is allowed to duplicate or transmit this manual in any forms without written
permission issued by 3onedata Co., Ltd.
Trademark statement
,and are the registered trademark owned by 3onedata
Co., Ltd. And other trademarks mentioned in this manual belong to their corresponding companies.
Notice
Purchased product, service or features should be constrained by 3onedata commercial contracts and
clauses. The whole or part product, service or features described in this document may beyond
purchasing or using range. 3onedata won't make any statement or warranty for this document content
unless any other appointment exists.
Due to product version upgrading or other reason, this document content will be upgraded periodically.
Unless other appointment exists, this document only for usage guide, all statement, information and
suggestion in this document won't constitute any warranty.

3onedata Co., Ltd.
Headquarter address: 3/B, Zone 1, Baiwangxin High Technology Industrial park, Nanshan
District, Shenzhen, 518108 China
Technology support: [e-mail]
Service hotline: [phone]
E-mail: [email protected]om
Fax: [phone]
Website: http://www.3onedata.com

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
1
Preface
The software user manual describes the industrial Ethernet switch:
Product features
Product network management configuration
Note
The screenshot reference model of this manual is 4 Gigabit PoE Ports + 2 2.5G SFP + 2
48VDC Power Inputs. Other series models have the same interface function and operation
except for the following differences.

Differences in Ethernet interfaces and types and quantities of power supplies.
Audience
This manual applies to the following engineers:
Network administrators
Technical support engineers
Hardware engineers
Conventions
Format Description
" "
Words with “” represent the interface words. Fox example
“Port number”.
>
Multiple paths are separated by the symbol ‘>’. Such as
opening the local connection path description: Open "Control
Panel> Network Connection> Local Area Connection".
Light Blue Font
It represents the words clicked to achieve hyperlink. Font
color as: "Light blue".
About this chapter
The section ‘about this chapter’ provide links to various
sections of this chapter, as well as links to the Principles
Operations Section of this chapter.
Symbols

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
2
Format Description
Notice
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
Warning
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Note
Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
Key The tips of configuration and operation.
Tips
Pay attention to the operation or information to ensure
success device configuration or normal working.
Revision Record
Version No. Date Revision note
01 2021-11-22 Product release

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
I
Contents
PREFACE.......................................................................................................................................1
CONTENTS.....................................................................................................................................I
1LOG IN THE WEB INTERFACE ...........................................................................................1
1.1 WEB BROWSING SYSTEM REQUIREMENT ......................................................................1
1.2 SETTING IP ADDRESS OF PC.........................................................................................1
1.3 LOG IN THE WEB CONFIGURATION INTERFACE ...............................................................3
2SYSTEM.................................................................................................................................5
2.1 SYSTEM INFORMATION ................................................................................................5
2.1.1 System Information Configuration..................................................................................5
2.1.2 System Information Monitor..........................................................................................6
2.1.3 CPU Load....................................................................................................................7
2.2 IP ..............................................................................................................................7
2.2.1 IP Configuration ...........................................................................................................7
2.2.2 IP Status Monitoring ................................................................................................... 11
2.3 NTP CONFIGURATION ................................................................................................13
2.3.1 NTP Client Configuration............................................................................................13
2.3.2 NTP Server Configuration ...........................................................................................14
2.4TIME ZONE CONFIGURATION ......................................................................................14
2.5 SYSTEM LOG.............................................................................................................15
2.5.1 Log Configuration ......................................................................................................15
2.5.2 System Information.....................................................................................................15
2.5.3 Alert Log ...................................................................................................................17
3PORT ...................................................................................................................................19
3.1 PORT ........................................................................................................................19
3.1.1 Port Settings...............................................................................................................19
3.1.2 Port Status .................................................................................................................21
3.1.3 Port Statistics Overview ..............................................................................................22
3.1.4 Detailed Port Statistics ................................................................................................23
3.2 DDMI ......................................................................................................................25
3.2.1 DDMI Configuration...................................................................................................25
3.2.2 DDMI Overview Monitor............................................................................................25
3.3 RELAY ALARM ..........................................................................................................26
4SECURITY...........................................................................................................................28
4.1 USERS ......................................................................................................................28
4.2 PRIVILEGE ................................................................................................................30

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
II
4.3 AUTH METHOD..........................................................................................................31
4.3.1 Authentication Method Configuration...........................................................................31
4.3.2 Command Authorization Method Configuration.............................................................32
4.3.3 Accounting Method Configuration ...............................................................................33
4.4 SSH .........................................................................................................................33
4.5 HTTPS.....................................................................................................................34
4.6 ACCESS MANAGEMENT..............................................................................................36
4.6.1 Access Management Configuration ..............................................................................36
4.6.2 Access Management Statistics Monitoring ....................................................................37
4.7 SNMP......................................................................................................................38
4.7.1 System Configuration..................................................................................................38
4.7.2 Trap Configuration .....................................................................................................39
4.7.3 SNMPv3 Community Configuration.............................................................................43
4.7.4 User Configuration .....................................................................................................44
4.7.5 Group Configuration...................................................................................................46
4.7.6 View Configuration.....................................................................................................47
4.7.7 Access Configuration ..................................................................................................48
4.8 RMON.....................................................................................................................49
4.8.1 Statistical Group Configuration....................................................................................49
4.8.2 History Configuration .................................................................................................50
4.8.3 Alarm configuration....................................................................................................50
4.8.4 Link Event Configuration ............................................................................................52
4.8.5 Statistics Monitoring ...................................................................................................53
4.8.6 History Monitoring .....................................................................................................55
4.8.7 Alarm Monitoring.......................................................................................................57
4.8.8 Event Monitoring .......................................................................................................59
5SECURE NETWORK ...........................................................................................................61
5.1 PORT LIMIT CONTROL................................................................................................61
5.1.1 System Configuration..................................................................................................62
5.1.2 Port Configuration ......................................................................................................62
5.2 PORT SECURITY.........................................................................................................64
5.2.1 Switch Monitoring ......................................................................................................65
5.2.2 Port Monitoring..........................................................................................................66
5.3 NAS ........................................................................................................................67
5.3.1 Network Access Server Configuration...........................................................................67
5.3.2 Network Access Server Switch Status ...........................................................................74
5.3.3 NAS Statistics ............................................................................................................75
5.4 ACL ........................................................................................................................76
5.4.1 Port Configuration ......................................................................................................76
5.4.2 Rate Limiter Configuration..........................................................................................78
5.4.3 Access Control List Configuration................................................................................78
5.4.4 ACL Status Monitoring ...............................................................................................81
5.5 RADIUS ..................................................................................................................82

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
III
5.5.1 RADIUS Server Configuration.....................................................................................82
5.5.2 RADIUS Authentication Statistics Link Monitoring .......................................................86
5.6 ETHERNET SERVICES .................................................................................................92
5.6.1 Port Configuration ......................................................................................................92
5.6.2 L2CP Configuration....................................................................................................93
5.6.3 Bandwidth Limitation Subset.......................................................................................94
5.6.4 EVCs Configuration....................................................................................................96
5.6.5 ECEs Configuration ..................................................................................................101
5.6.6 EVC Statistics .......................................................................................................... 110
5.7 TACACS+ SERVER CONFIGURATION......................................................................... 111
6LAYER 2 PROTOCOL ....................................................................................................... 113
6.1 MAC .....................................................................................................................113
6.1.1 MAC Address Table Configuration............................................................................. 113
6.1.2 MAC Address Table Monitoring................................................................................. 115
6.2 VLAN ....................................................................................................................116
6.2.1 VLAN ..................................................................................................................... 117
6.2.2 Access..................................................................................................................... 118
6.2.3 Trunk ...................................................................................................................... 119
6.2.4 Hybrid.....................................................................................................................120
6.3 DHCP SERVER ........................................................................................................123
6.3.1 Mode Setting............................................................................................................123
6.3.2 Reserve IP configuration ...........................................................................................124
6.3.3 DHCP Pool Configuration .........................................................................................125
6.3.4 Statistics Monitoring .................................................................................................130
6.3.5 Binding Monitoring ..................................................................................................132
6.3.6 Conflict Monitoring ..................................................................................................133
6.4 DHCP RELAY .........................................................................................................133
6.4.1 Relay Configuration..................................................................................................133
6.4.2 Relay Statistics Monitoring........................................................................................135
6.5 DHCP SNOOPING ....................................................................................................137
6.5.1 Listening Configuration.............................................................................................137
6.5.2 Listening Table Monitoring........................................................................................138
6.6 DHCP DETAILED STATISTICS....................................................................................139
6.7 LLDP.....................................................................................................................141
6.7.1 LLDP Configuration .................................................................................................141
6.7.2 Neighbor Monitoring ................................................................................................144
6.7.3 Port Statistics Monitoring ..........................................................................................145
6.8 STORM POLICING ....................................................................................................147
6.9 LOOP PROTECTION ..................................................................................................148
6.9.1 Loop Protection Configuration ...................................................................................148
6.9.2 Loop Protection Status ..............................................................................................150
6.10 STATIC AGGREGATION .............................................................................................151
6.10.1 Aggregation Mode Configuration ...............................................................................151

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
IV
6.10.2 Aggregation Status ...................................................................................................152
6.11 LACP ....................................................................................................................153
6.11.1 LACP Configuration .................................................................................................153
6.11.2 System Status Monitoring..........................................................................................154
6.11.3 Port State Monitoring................................................................................................155
6.11.4 Port Monitoring Statistics ..........................................................................................156
6.12 SPANNING TREE ......................................................................................................157
6.12.1 Bridge Setting Configuration .....................................................................................157
6.12.2 MSTI Mapping Configuration....................................................................................159
6.12.3 MSTI Priority Configuration......................................................................................160
6.12.4 CIST Port Configuration............................................................................................160
6.12.5 MSTI port configuration............................................................................................163
6.12.6 Bridge Status Monitoring ..........................................................................................163
6.12.7 Port State Monitoring................................................................................................166
6.12.8 Port Statistics Monitoring ..........................................................................................167
6.13 RING ......................................................................................................................168
6.13.1 Ring Configuration ...................................................................................................168
6.13.2 Loop Monitoring ......................................................................................................170
6.14 MEP ......................................................................................................................171
6.14.1 Maintenance Entity Point ..........................................................................................171
6.14.2 MEP Configuration...................................................................................................172
6.15 ERPS .....................................................................................................................196
6.15.1 ERPS ......................................................................................................................196
6.15.2 ERPS Configuration..................................................................................................198
7MULTICAST ......................................................................................................................205
7.1 IGMP SNOOPING.....................................................................................................205
7.1.1 Basic Configuration ..................................................................................................205
7.1.2 VLAN Configuration ................................................................................................206
7.1.3 Status Monitoring .....................................................................................................208
7.1.4 Group Information Monitoring...................................................................................209
7.1.5 IPV4 SFM Information Monitoring ............................................................................ 211
7.2 MULTICAST MAC....................................................................................................212
8POE ....................................................................................................................................214
8.1 GLOBAL CONFIGURATION ........................................................................................214
8.1.1 PoE Configuration ....................................................................................................214
8.1.2 Power Over Ethernet Status .......................................................................................216
8.2 POEPOWER DELAY ..................................................................................................218
8.3 POLICY CONFIGURATION..........................................................................................219
8.3.1 Policy Configuration .................................................................................................219
8.3.2 Policy Binding .........................................................................................................221
8.4 AUTO CHECK ..........................................................................................................222
9SERVICE QUALITY ..........................................................................................................223
9.1 QOSINGRESS PORT CLASSIFICATION.........................................................................223

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
V
9.2 QOSINGRESS PORT POLICERS ..................................................................................225
9.3 QOSINGRESS QUEUE POLICERS................................................................................226
9.4 QOSEGRESS PORT SCHEDULERS ..............................................................................227
9.5QOSEGRESS PORT SHAPERS ....................................................................................227
9.6 QOSEGRESS PORT REMARKING ...............................................................................228
9.7 PORT DSCP CONFIGURATION ...................................................................................228
9.8 DSCP BASED QOSINGRESS CLASSIFICATION .............................................................230
9.9 DSCP TRANSLATION ...............................................................................................232
9.10 DSCP CLASSIFICATION ............................................................................................234
9.11 QOSCONTROL LIST CONFIGURATION........................................................................235
9.12 QOSSTATISTICS ......................................................................................................237
9.13 QCL STAT U S ...........................................................................................................238
10 SYSTEM DIAGNOSIS........................................................................................................240
10.1 MIRRORING ............................................................................................................240
10.2 PING ......................................................................................................................241
10.3 CABLE DETECTION ..................................................................................................242
11 SYSTEM MAINTENANCE ................................................................................................245
11.1 RESTART DEVICE.....................................................................................................245
11.2 FACTORY DEFAULTS ................................................................................................245
11.3 SOFTWARE UPLOAD.................................................................................................246
11.4 FIRMWARE SELECTION.............................................................................................246
12 SYSTEM CONFIGURATION.............................................................................................248
12.1 SAVE STARTUP-CONFIG ............................................................................................248
12.2 DOWNLOAD ............................................................................................................248
12.3 UPLOAD .................................................................................................................249
12.4 ACTIVATE ...............................................................................................................250
12.5 DELETE ..................................................................................................................250
13 MAINTENANCE AND SERVICE .......................................................................................251
13.1 INTERNET SERVICE ..................................................................................................251
13.2 SERVICE HOTLINE ...................................................................................................251
13.3 PRODUCT REPAIR OR REPLACEMENT .........................................................................251

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
1
1Log in the Web Interface
1.1 WEB Browsing System Requirement
While using managed industrial Ethernet switches, the system should meet the
following conditions.
Hardware and software System requirements
Resolution 1024x768 or above
Color 256 color or above
Browser Internet Explorer 6.0 or above
Operating system
Windows XP
Windows 7
1.2 Setting IP Address of PC
The switch default management as follows:
IP Settings Default Value
IP Address 192.168.1.254
Subnet mask 255.255.255.0
When configuring a switch through the Web:
Before making remote configuration, make sure that the route between the
computer and the switch is reachable.
Before local configuration, please make sure the IP address of the computer is
on the same subnet to the one of switch.
Note:
When the switch is first configured. If it is configured locally, make sure the current
computer network segment is 1.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
2
Eg: Assume that the IP address of the current PC is 192.168.5.60, change the network
segment "5" of the IP address to "1".
Operation Steps
Amendment steps as follow:
Step 1 Open “Control panel > Network connection > Local area connection > Properties >
Internet protocol version (TCP/IPv4) Properties”.
Step 2 Change the "5" selected by the red frame in the figure to "1".
Step 3 Click “OK”
Step 4 End.
Notice
In windows system, if user adopts the advanced configuration function of IP address and
accesses the switch device via setting IP dummy address, the following two managed
functions can't be achieved: IGMP polling and IEEE 802.1x polling.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
3
1.3 Log in the Web Configuration Interface
Operation Steps
The initial password of the default user must be changed when logging in to the device
for the first time. Login in the web configuration interface as follow:
Run the computer browser.
Enter the address of the switch "http://192.168.1.254" in the address bar of the browser.
Click the Enter key.
Pop-up dialog box as shown below, enter the user name and password in the login
window.
Note:
This switch supports one default user. This user has administrator privilege and can
configure devices via WEB, TELNET, SSH, CLI, etc.
The default username and password are “admin”; please strictly distinguish capital and
small letter while entering.
If you log in to the device for the first time, you will be prompted to change the default
user's initial password. If the password has been modified through the WEB or CLI, the
subsequent steps can be ignored and the modified password can be used to log in to the
device directly.
If the number of incorrect login information input reaches 5 times, the system will
automatically lock the user for 5 minutes.
Click "Login".
Pop up a window as the figure below, enter the user name and new password on the
login window.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
4
Note:
The device could be logged in for the first time by default username and initial
password; After logging in, the system will prompt you to modify the default user's
initial password, and you can log in normally after modification.
The length of the new password string must be greater than or equal to 8 and be
composed of two or more of uppercase letters, lowercase letters, numbers and special
characters.
After changing the password, save the current configuration on the "System
Configuration > Save startup-config" page to take effect.
Click "OK".
Pop up a window as the figure below, enter the user name and password on the login
window.
Click the “login” button.
End.
After login in successfully, user can configure relative parameters and information
according to demands.
Note:
After logging in to the device, you can modify the IP address of the switch for ease of use.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
5
2System
2.1 System Information
2.1.1 System Information Configuration
The switch system information is provided here.
System Contact
The textual identification of the contact person for this managed node, together with
information on how to contact this person. The allowed string length is 0 to 255, and
the allowed content is the ASCII characters from 32 to 126.
System Name
An administratively assigned name for this managed node. By convention, this is the
node's fully-qualified domain name. A domain name is a text string drawn from the
alphabet (A-Za-z), digits (09), minus sign (-). No space characters are permitted as
part of a name. The first character must be an alpha character. And the first or last
character must not be a minus sign. The allowed string length is 0 to 255.
System Location
The physical location of this node (e.g., telephone closet, 3rd floor). The allowed string
length is 0 to 255, and the allowed content is the ASCII characters from 32 to 126.
Buttons
Save: Click to save changes.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
6
Undo: Click to undo any changes made locally and revert to previously saved values.
2.1.2 System Information Monitor
The switch system information is provided here.
Contact
System contact configured by the path "System > System Information Configuration >
System Administrator".
Name
System name configured by the path "System > System Information Configuration >
Information > System Name".
Position
The location configured in “System > System Information Configuration > Information >
System Location”.
MAC Address
The MAC Address of this switch.
System Date
The current (GMT) system time and date. The system time is obtained through the
Timing server running on the switch, if any.
System Uptime
The period of time the device has been operational.
Software Version
The software version of this switch.
Software Date
The date when the switch software was produced.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
7
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
Refresh: Click to refresh the page.
2.1.3 CPU Load
This page displays the CPU load, using an SVG graph.
The load is measured as averaged over the last 100ms, 1sec and 10 seconds intervals.
The last 120 samples are graphed, and the last numbers are displayed as text as well.
In order to display the SVG graph, your browser must support the SVG format. Consult
the SVG Wiki for more information on browser support. Specifically, at the time of
writing, Microsoft Internet Explorer will need to have a plugin installed to support SVG.
Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
2.2 IP
2.2.1 IP Configuration
Configure IP basic settings, control IP interfaces and IP routes.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
8
The maximum number of interfaces supported is 8 and the maximum number of routes
is 32.
Mode
Configure whether the IP stack should act as a Host or a Router. In Host mode, IP
traffic between interfaces will not be routed. In Router mode traffic is routed between
all interfaces.
IP Interfaces
Delete
Select this option to delete an existing IP interface.
VLAN
The VLAN associated with the IP interface. Only ports in this VLAN will be able to
access the IP interface. This field is only available for input when creating a new
interface.
IPv4 DHCP Enabled
Enable the DHCPv4 client by checking this box. If this option is enabled, the system
will configure the IPv4 address and mask of the interface using the DHCPv4 protocol.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
9
The DHCPv4 client will announce the configured System Name as hostname to
provide DNS lookup.
IPv4 DHCP Fallback Timeout
The number of seconds for trying to obtain a DHCP lease. After this period expires, a
configured IPv4 address will be used as IPv4 interface address. A value of zero
disables the fallback mechanism, such that DHCP will keep retrying until a valid lease
is obtained. Legal values are 0 to 4294967295 seconds.
IPv4 DHCP Current Lease
For DHCP interfaces with an active lease, this column shows the current interface
address, as provided by the DHCP server.
IPv4 Address
The IPv4 address of the interface in dotted decimal notation.
If DHCP is enabled, this field configures the fallback address. The field may be left
blank if IPv4 operation on the interface is not desired - or no DHCP fallback address is
desired.
IPv4 Mask Length
The IPv4 network mask, in number of bits (prefix length). Valid values are between 0
and 30 bits for a IPv4 address.
If DHCP is enabled, this field configures the fallback address network mask. The field
may be left blank if IPv4 operation on the interface is not desired - or no DHCP fallback
address is desired.
DHCPv6 Enable
Enable the DHCPv6 client by checking this box. If this option is enabled, the system
will configure the IPv6 address of the interface using the DHCPv6 protocol.
DHCPv6 Rapid Commit
Enable the DHCPv6 Rapid-Commit option by checking this box. If this option is enabled,
the DHCPv6 client terminates the waiting process as soon as a Reply message with a
Rapid Commit option is received.
This option is only manageable when DHCPv6 client is enabled.
DHCPv6 Current Lease
For DHCPv6 interface with an active lease, this column shows the interface address
provided by the DHCPv6 server.

User Manual
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
10
IPv6 Address
The IPv6 address of the interface. A IPv6 address is in 128-bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For
example, fe80:: 215: c5ff: fe03:4dc7. The symbol is a special syntax that can be used
as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can appear only once.
System accepts the valid IPv6 unicast address only, except IPv4-Compatible address
and IPv4-Mapped address.
The field may be left blank if IPv6 operation on the interface is not desired.
IPv6 Mask
The IPv6 network mask, in number of bits (prefix length). Valid values are between 1
and 128 bits for a IPv6 address.
The field may be left blank if IPv6 operation on the interface is not desired.
Resolving IPv6 DAD
The link-local address is formed from an interface identifier based on the hardware
address which is supposed to be uniquely assigned. Once the DAD (Duplicate Address
Detection) detects the address duplication, the operation on the interface SHOULD be
disabled.
At this moment, manual intervention is required to resolve the address duplication. For
example, check whether the loop occurs in the VLAN or there is indeed other device
occupying the same hardware address as the device in the VLAN.
After making sure the specific link-local address is unique on the IPv6 link in use, delete
and then add the specific IPv6 interface to restart the IPv6 operations on this interface.
IP Routes
Delete
Select this option to delete an existing IP route.
Internet
The destination IP network or host address of this route. Valid format is dotted decimal
notation or a valid IPv6 notation. A default route can use the value 0.0.0.0or IPv6::
notation.
Mask Length
The destination IP network or host mask, in number of bits (prefix length). It defines
how much of a network address that must match, in order to qualify for this route. Valid