Akuvox C313X User manual

（Except C313N）
（Except C313N）
（Except C313N）
Before you begin using the device, please check the version you got and ensure that the following
items are included in the shipped box:
Plastic wall anchor x 4
ST4x20 crosshead screw x 2
M4x30 crosshead screw x 2
Wall-mounting bracket x 1
Front View
Rear View
Speaker
Product Overview
Unpacking
11 Pin cable x 1
10 Pin cable x 1
C313X x 1

Mark two fixation holes
through wall-mounting
bracket on the wall,the
distance between which
is 60mm. Make sure the
all cables can be passed
from the middle of
wall-mounting bracket.
Take down the
bracket, then using a
6mm hand drill to
make the two fixation
holes on the wall you
marked before.
Once the fixation
holes are made,
insert the two plastic
wall anchors
provided.
Use two ST4x20
crosshead screws to fix
the wall-mounting
bracket on the wall.
Fix the wall-mounting bracket on the 86 embedded
box with two M4x30 crosshead screws.
Make sure all cables in the 86
embedded box.
After connecting the wires according to the wiring
diagram, align the device with the wall-mounting
bracket. And push down to fix the device securely.
Device Mounting
With 86 embedded box in the wall
Without 86 embedded box in the wall
Installation

Application Network Topology
LAN
Door Phone
Device Wiring
Power
Input
C313X C313X C313X
PoE PoE PoE
PoE
PC (third party)

Press Intercom key , enter the callee’s number or room address , then choose Audio
or Video mode to call out.
AKUVOX (XIAMEN) NETWORKS CO., LTD.
ADD: 10/F, NO.56 GUANRI ROAD, SOFTWARE PARK II, XIAMEN 361009, CHINA
www.akuvox.com
Notice Information
Akuvox C313X firmware contains third-party open source software under the terms of the GNU General Public
License(GPL). Akuvox is committed to meeting the requirements of the GNU General Public License (GPL) and will
make all required source code available.
The source code of software under the terms of GNU GPL can be downloaded online: http://www.akuvox.com/gpl.
Information contained in this document is believed to be accurate and reliable at the time of printing. This
document is subject to change without notice, any update to this document can be viewed on Akuvox’ s website:
http://www.akuvox.com © Copyright 2022 Akuvox Ltd. All rights reserved.
1.After setting up network and power, press Status icon to check IP address (DHCP by default).
2.Launch web browser and type in the IP address to access web interface, login with username and
password.(admin by default).
3.Register the device with your SIP account.(please refer to user manual for more information).
When receiving a video call, users can choose Audio or Video mode to answer.
However, if there is an audio call, users can only press Audio mode to pick up.
During the talk, press the Open Door key in talking interface to unlock the door.
Press Monitor key to receive the video from indoor IPC or community IPC any time.
Press SOS key in case of an emergency.
Operation
Configuration