ATEQ VT User manual

VT
Industrial smart tire pressure
devices tester (TPMS)
The principle of the
ATEQ VT is to start and
check retrieve data from all
smart devices mounted on
vehicle wheels. The instru-
ment checks their identi-
fiers and loads the vehicle's
onboard computer (OBC).
This instrument is the ideal
tool for low and medium
volume production line, and
off line repair stations.
Main Features
www.ateq.com
EASY OPERATION
LARGE GRAPHIC DISPLAY
LI-ION BATTERY
STRONG ABS CASE
LONG NOZE VERSION FOR
STAND-UP OPERATION
Two versions: long and short noze
LF (TX) 125 kHz continuous or modulated (OOK)
RF (RX) 315 MHz or 433 MHz (optional 868 MHz)
Available with manchester or NRZ encoding (others on
request)
RF (TX) option on request with external directionnal
antenna (300 - 500 MHz)
LCD graphic display 65 mm x 32 mm
One LED per wheel (5)
Internal LI-ON battery charger
with external 24V power supply
CAN and RS232 network connector
Autonomy in normal use: 8 hours
Weight: 1.6 kg
Size: H x L x D: 285 x 155 x 870 with antenna

Other TPMS products supplied by ATEQ
Operation
Sens du Flux
Antennes
Armoire
ATEQ VT60
Configuration
Position the end of the antenna in front of the valve of a wheel, and press the measurement actua-
tion key for the wheel concerned.
Normal Operation
Pressing one of the following keys actuates the measurement cycle for the wheel concerned.
To acquire all the identifiers of a vehicle, perform the operation for all the wheels in succession, in
any order.
Automatic production line units
Maintenance smart tire pressure devices tester
Pocket size
Easy operation
Large graphic display
Li-Ion Battery
Strong ABS case
USB interface
All configurations possible
Antennas
Line control