Ballard Designs Madison JC157 User manual

REQUIRED TOOLS
- Two 4mm Allen Wrenches (Removing M6 Allen Bolts)
Ltr.
A1
B1
Qty. Components Included
Back Sling (A)
Seat Sling (B)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 12-7-2021 Page 1 of 2
PRODUCT NAME: Madison Chaise Replacement Sling Set*
ITEM NUMBER: JC157
IMPORTED
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
*Madison Poolside Chaise (JC152) sold separately.

(A)
(B) Wooden Side Supports
Page 2 of 2
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Remove Wooden Side Supports from pockets on sides of existing Back Sling. Unfold new
Back Sling (A) and insert Supports into side pockets. Repeat process for Seat Sling (B).
STEP 1: Invert Chaise onto a level, padded surface and use two 4mm Allen Wrenches to remove all six
Allen Bolts and Allen Nuts from Back Assembly. Insert an Allen Wrench into Bolt Head and into Nut.
Turn to remove. Set all hardware aside then carefully pull existing Back Sling away from Chaise frame.
STEP 2: Use two 4mm Allen Wrenches to remove all eight Allen Bolts and Allen Nuts from Seat Assem-
bly. Insert an Allen Wrench into Bolt Head and into Nut. Turn to remove. Set all hardware aside then
carefully pull existing Seat Sling away from Chaise frame.
STEP 4: Place new Slings into Chaise frame and replace hardware removed in Steps 1 and 2.