Ballard Designs Original Home Office Corner Desk User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 2/20/2019 Page 1 of 5
PRODUCT NAME: Original Home Office Corner Desk
ITEM NUMBER: MO239
ASSEMBLED DIMENSIONS : 53 3/4”H x 32 1/2”W x 27 3/4”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
Ltr.
A 24
B16
Qty. Hardware Included
Ltr.
D
E
1
1
Qty. Components
C
4
TOOLS NEEDED: Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
D
4
Wood Screw
Coarse Wood Screw
L-Bracket
Connector
Top
Leg

Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Remove components and hardware from packaging.
Secure L-Brackets (C) to Leg (F) using Coarse Wood Screws (B). Firmly tighten.
STEP 2:

Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Invert Top (E) onto a clean, level, padded surface. Secure L-Brackets (C) on Leg (F)
to Top (E) using Coarse Wood Screws (B).
Attach Connectors (D) to underside end of each Original Home Office Top using
Wood Screws (A). Firmly tighten.
STEP 4:
Underside
Underside

Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a clean, soft cloth.
Attach Connectors (D) to underside end of each Original Home Office Top using
Wood Screws (A). Firmly tighten.
STEP 5 :