Ballard Designs Madison Loveseat JC025 User manual

PRODUCT NAME: Madison Loveseat
ITEM NUMBER: JC025
DIMENSIONS OF ITEM ASSEMBLED: 35 1/4”H x 51 3/4”W X 34 1/2”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 11/19/2013 Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN VIETNAM

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
TOOLS NEEDED:
Assembly requires 2 people.
Ltr.
A 6 90mm Allen Screws
Left Arm (D)
Right Arm (E)
Seat (F)
Back (G)
Seat Cushions (H)
Back Cushions (I)
B
C
6 Screw Plugs
1 Allen Wrench
Qty. Hardware Included
Ltr.
D 1
E 1
F 1
G 1
H 2
I 2
Qty. Components

(H)(G)(F)(E)(D)(C)(B)(A) (I)
Page 3 of 4
STEP 1: On a smooth, clean surface, assemble the Loveseat on it’s back. Insert the protruding parts on
the Back (G) and Seat (F) into the Left Arm (D). Hand tighten the 90mm Allen Screws (A) into
the Left Arm (D). DO NOT over tighten the Screws.
STEP 2: While the Assembly is still laying on it’s back, slide the Right Arm (E) onto the protruding parts
on the Back (G) and Seat (F). Screw in the 90mm Allen Screws (A) into the Right Arm (E)
using the Allen Wrench (C). Fully tighten all Screws (A) in the Left Arm (D) and Right Arm (E)
using the Allen Wrench (C).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(G)
(G)
(F)
(F)
(E)
(D)
(D)
(A)
(A)

Page 4 of 4
STEP 3: Set the assembled Loveseat upright and insert the Screw Plugs (B) into the Left Arm (D) and
Right Arm (E).
STEP 4: Place the Seat Cushions (H) and Back Cushions (I) on the Loveseat.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(H)
Clean & Care
Please refer to the care instructions on the hang tag.
(F)
(E)
(D)
(B)
(I)