Ballard Designs Wren SL184 User manual

Ltr.
A 6
B 6
Qty. Hardware Included
Ltr.
C
D1
1
Qty. Components
REQUIRED TOOLS:
Phillips Screwdriver
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
Screws (1/4” x 1”)
Flat Washers (1/4”)
Top (C)
Base (D)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 5-25-2021 Page 1 of 2
PRODUCT NAME: Wren Dining Table
ITEM NUMBER: SL184
ASSEMBLED DIMENSIONS : 30”H x 60” Diameter
MADE IN MEXICO
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 2
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, placemats to protect surfaces.
Promptly remove spills. Dust with a soft, dry cloth.
STEP 1: Invert Top (C) onto a padded, level surface. Invert Base (D) and align holes along edge with
embedded T-nuts in Top.
STEP 2: Insert Screws (A) with Flat Washer (B) and fully tighten using a Phillips Screwdriver.
DO NOT OVER-TIGHTEN SCREWS
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)
(D)
(A)
(B)
Assemble in location for intended use.