Ballard Designs Prelit Noblis Fir User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 11-2-2020 Page 1 2
PRODUCT NAME: Prelit Noblis Fir
ITEM NUMBER: HT038/HT039
ASSEMBLED DIMENSIONS : 7’ x 58”Diameter or 9’ x 72”Diameter
IMPORTED
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 2
Read this warning & instruction manual completely before
assembling this product. Keep this manual and all relevant
information for future reference!
WARNING!
Safety instructions
• Keep original packaging for storing your product.
• Keep young children supervised when using the
product.
• Keep plastic bags out of reach of young children.
• The product must be assembled by an adult.
• This product is for indoor use only.
• This product is for decorative purposes only. Do not
use this product for any other purpose than for which
it is intended. Do not modify the product.
• Illustrations are for reference only, as the models
may vary slightly.
• During assembly, prevent clutching or pinching risk.
• Place the product on a level surface in order to
ensure stability.
• Do not overload with heavy decorations.
•
• Do not decorate with burning candles.
•
• Do not leave working lighting chains unattended.
• Unplug product when leaving it unattended.
Assembly instructions
All packaging should contain a top section and a bottom section,
depending on purchased model (larger trees include middle sections).
Tree base is included. Before assembly, remove all parts from packaging.
Tree:*
1. Unfold the tree base and insert the eye bolt(s).
2.
During assembly of the tree, make sure all branches are placed in the
correct position. Take care not to place unnecessary pressure on the
branches when assembling. Please make sure you tighten the eye
bolt(s) of the tree base.
3.
tree the desired amount of fullness. For best results, straighten and
separate all branch tips. Start with the tips that are nearest the stem.
Please refer to our website for shaping tips: www.everlands-trees.com
4.
5. Your tree is now ready for decoration.
Storage instructions
• Before storage, remove all decorations.
•
•
• Press the tips back up against the branches.
• Put the tree sections back into the box.
•
Disposal instructions
At the end of product life, the product may be recycled, for example at a
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.